Direct-coated Cu2SnS3 films from molecular solution inks for solar photovoltaics
Source abstract
Abstract
Abstract Cu-based solution/ink coated sulphides have gained tremendous interest in last few years for low-cost solar cells. In this paper, pure copper tin sulphide films have been directly-coated from two different types of molecular solution inks developed with ethylene glycol and ethylene glycol - isopropyl alcohol mixture. Structural, compositional and microstructural properties of direct-coated films were studied and compared. The formation of pure tetragonal copper tin sulphide is confirmed by X-ray diffraction and Raman spectroscopy analysis. Overall it is found that films deposited from ethylene glycol - isopropyl alcohol mixture (glycoholic ink) are comparatively smoother and denser. An X-ray photoelectron study confirms the presence of Cu+ state in the films. The films are photoconducting and show p-type conduction. In general, microstructure of the films was found to depend upon type of solvents.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Materials availability expands the opportunity for large-scale photovoltaics deployment10.1021/es8019534 ↗
2. Towards sustainable photovoltaics: the search for new materials10.1098/rsta.2010.0348 ↗
3. Direct liquid coating of chalcopyrite light-absorbing layers for photovoltaic devices10.1002/ejic.200900837 ↗
4. Low-cost inorganic solar cells: from ink to printed device10.1021/cr100191d ↗
5. 2009
6. Device characteristics of CZTSSe thin‐film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
7. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
8. High efficiency solution processed sintered CdTe nanocrystal solar cells: the role of interfaces10.1021/nl403912w ↗
9. Synthesis and characterization of 15% efficient CIGSSe solar cells from nanoparticle inks10.1002/pip.2588 ↗
10. Molecular-ink route to 13.0% efficient low-bandgap CuIn(S,Se)2 and 14.7% efficient Cu(In,Ga)(S,Se)2 solar cells10.1039/C5EE02870A ↗
11. High-density Cu–In intermetallic nanocrystal layers: towards high-efficiency printable CuInSe2 solar cells10.1039/C5TA02403J ↗
12. Solution-processed solar cells based on environmentally friendly AgBiS2 nanocrystals10.1038/nphoton.2016.108 ↗
13. 10.6% Certified colloidal quantum dot solar cells via solvent-polarity-engineered halide passivation10.1021/acs.nanolett.6b01957 ↗
14. Phase relations and optical properties of semiconducting ternary sulfides in the system Cu-Sn-S10.1016/S0022-3697(03)00172-0 ↗
15. Fabrication of ternary Cu-Sn-S sulfides by a modified successive ionic layer adsorption and reaction (SILAR) method10.1039/c2jm31669b ↗
16. Formation of Cu2SnS3 thin film by the heat treatment of electrodeposited SnS-Cu layers
17. M.P. Suryawanshi, U.V. Ghorpade, S.W. Shin, S.A. Pawar, In. Young Kim, C. Woo Hong, M. Wu, P. S. Patil, A. V. Moholkarand J. Hyeok Kim, A simple aqueous precursor solution processing of earth-abundant Cu2SnS3 absorbers for thin-film solar cells, ACS Appl. Mater. Interfaces 8 11603, 2016.10.1021/acsami.6b02167 ↗
18. Thin film solar cells based on the ternary compound Cu2SnS310.1016/j.tsf.2012.05.085 ↗
19. Effect of annealing temperature on the properties of spray deposited Cu2SnS3 thin films10.1002/pssa.201329157 ↗
20. Cu2SnS3 and Cu4SnS4 thin films via chemical deposition for photovoltaic application10.1149/1.3384660 ↗
21. Fabrication of Cu2SnS3 thin films by sulfurization of evaporated Cu‐Sn precursors for solar cells10.1002/pssc.201200866 ↗
22. Cu2SnS3 as a potential absorber for thin film solar cells10.1063/1.4710361 ↗
23. Non-toxic, earth abundant 2% efficient Cu2SnS3 solar cell based on tetragonal films direct-coated from single metal-organic precursor solution10.1016/j.solmat.2013.02.017 ↗
24. Cu2SnS3 thin-film solar cells fabricated by sulfurization from NaF/Cu/Sn stacked precursor10.7567/APEX.8.042303 ↗
25. Solution processed single-phase Cu2SnS3 films: structure and photovoltaic performance10.1039/C7SE00150A ↗
26. Structural, morphological and optical properties of Cu2SnS3 thin film synthesized by spin coating technique10.1016/j.vacuum.2013.08.019 ↗
27. Solution processible Cu2SnS3 thin films for cost effective photovoltaics: characterization10.1016/j.matchemphys.2015.10.049 ↗
28. Solution-processed Cu2SnS3 thin film solar cells10.1039/C6RA09389B ↗
29. Direct solution coating of pure-phase Cu2SnS3 thin films without sulfurization
30. Microwave-assisted rapid synthesis of tetragonal Cu2SnS3 nanoparticles for solar photovoltaics10.1007/s00339-014-8484-2 ↗
31. Chemical synthesis of Cu2SnS3 (CTS) nanoparticles: a status review10.1016/j.jallcom.2015.09.232 ↗
32. Electrical conduction of CZTS films in dark and under light from molecular solution ink10.1016/j.jallcom.2016.05.299 ↗
33. Dark and photo-conductivity of doctor-bladed CZTS films above room temperature10.1088/0022-3727/48/45/455109 ↗
34. Kesterite Cu2ZnSnS4 thin films by drop-on-demand inkjet printing from molecular ink10.1016/j.jallcom.2018.03.028 ↗
35. Fabrication of Cu2SnS3 thin-film solar cells with power conversion efficiency of over 4%10.7567/JJAP.54.08KC06 ↗
36. Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS–Se solar cells10.1039/C5EE02153G ↗
37. Earth abundant thin film solar cells from co-evaporated Cu2SnS3 absorbers layers10.1016/j.jallcom.2016.07.293 ↗
38. and Andriy Zakutayev, Control of doping in Cu2SnS3 through defects and alloying10.1021/cm501339v ↗
39. A review of defects and disorder in multinary tetrahedrally bonded semiconductors10.1088/0268-1242/31/12/123004 ↗
40. Characterization of Cu2SnS3 polymorphism and its impact on optoelectronic properties10.1039/C7TA08705E ↗
41. CuxSnSx+1 (x = 2, 3) thin films grown by sulfurization of metallic precursors deposited by dc magnetron sputtering10.1002/pssc.200982746 ↗
42. A study of ternary Cu2SnS3 and Cu3SnS4 thin films prepared by sulfurizing stacked metal precursors10.1088/0022-3727/43/21/215403 ↗
43. Raman analysis of monoclinic Cu2SnS3 thin films10.1063/1.4712623 ↗
44. Atmospheric pressure chemical vapor deposition of tin sulfides (SnS, Sn2S3, and SnS2) on glass10.1021/cm990005z ↗
45. Imaging and phase identification of Cu2ZnSnS4 thin films using confocal Raman Spectroscopy10.1116/1.3625249 ↗
46. Synthesis of earth-abundant Cu2SnS3 powder using solid state reaction10.1016/j.jpcs.2013.11.012 ↗
47. Study of band offsets at the Cu2SnS3/In2O3: Sn interface using x-ray photoelectron spectroscopy10.1088/2053-1591/2/6/065901 ↗