journal article·2018-11

Copper doping of MoO thin films for CdTe solar cells

Min Zhang, Lian Qiu, Wei Li, Jingquan Zhang, Lili Wu, Lianghuan Feng

Publisher page

Abstract

Abstract MoOx: Cu thin films were deposited by thermal co-evaporation. The copper atoms prevented MoOx thin films growing along or perpendicular to the substrates, resulting in the decrease of the crystallinity. The energy band gaps for the films decreased from 3.22 to 2.29 eV with the increase of Cu concentration from 0 to 20 at%. Owing to the formation of the oxygen vacancies, MoOx thin films were n-type semiconductors. As MoOx thin films were doped with Cu, the films also showed the characteristics of electronic conduction. In contrast to the difference between the Fermi level and the bottom of conduction band was 0.27 eV for MoOx thin films, a strong hybrization among the O 2p, Mo 4d, and Cu 3d states occurred in the Cu-doped MoOx thin films, thus the electrons occupied the anti-bonding d-d* band and the Fermi level was shifted within the conduction band. With the use of MoOx as a back contact buffer layer, performance of the CdTe solar cells was mainly improved by the reduced Schottky barrier, which is ascribed to the presence of the defect states. CdTe solar cells with Cu-doped MoOx thin films demonstrated higher efficiency (~14.63%) than those with undoped MoOx or without a back contact buffer in our work, which results from the enhancements in the open circuit voltage (~830 mV) and fill factor (~72.7%) due to the zero barrier in the MoOx: Cu thin films. Therefore, MoOx: Cu buffer layer is a promising contact material for CdTe solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. High-efficiency polycrystalline CdTe thin-film solar cells10.1016/j.solener.2004.06.006 ↗
2. CdTe solar cells at the threshold to 20% efficiency10.1109/JPHOTOV.2013.2278661 ↗
3. Solar cell efficiency tables (version 51)10.1002/pip.2978 ↗
4. Development of efficient and stable back contacts on CdTe/CdS solar cells
5. 14% sputtered thin-film solar cells based on CdTe10.1002/pssb.200304281 ↗
6. Phase control of CuxTe film and its effects on CdS/CdTe solar cell10.1016/j.tsf.2006.12.151 ↗
7. Controlled activation of ZnTe: Cu contacted CdTe solar cells using rapid thermal processing10.1016/j.solmat.2014.10.045 ↗
8. White OLED with high stability and low driving voltage based on a novel buffer layer MoOx10.1088/0022-3727/40/18/007 ↗
9. A metallic molybdenum suboxide buffer layer for organic electronic devices10.1063/1.3432447 ↗
10. Efficient, air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
11. Integrated perovskite/bulk-heterojunction toward efficient solar cells10.1021/nl504168q ↗
12. Combinatorial investigation and modelling of MoO3 hole-selective contact in TiO2/Co3O4/MoO3 all-oxide solar cells10.1002/admi.201500405 ↗
13. Improvement of kesterite solar cell performance by solution synthesized MoO3 interfacial layer10.1002/pssa.201600534 ↗
14. The effect of MoOx inter-layer on thin film CdTe/CdS solar cell10.1016/j.solmat.2012.04.006 ↗
15. MoOx back contact for CdS/CdTe thin film solar cells: preparation, device characteristics and stability10.1016/j.solmat.2012.01.001 ↗
16. Development of MoOx thin films as back contact buffer for CdTe solar cells in substrate configuration10.1016/j.tsf.2012.11.110 ↗
17. Band alignment of CdTe with MoOx and fabrication of high efficiency CdTe solar cells10.1016/j.solener.2018.01.031 ↗
18. Sputtered CdS/CdTe solar cells with MoO3−x/Au back contacts10.1016/j.solmat.2013.01.041 ↗
19. CdTe/CdS thin film solar cells grown in substrate configuration10.1002/pip.2233 ↗
20. Effect of copassivation of Cl and Cu on CdTe grain boundaries10.1103/PhysRevLett.101.155501 ↗
21. Role of the deep-lying electronic states of MoO3 in the enhancement of hole-injection in organic thin films10.1063/1.3231928 ↗
22. Wei, Effect of Copassivation of Cl and Cu on CdTe Grain Boundaries10.1103/PhysRevLett.101.155501 ↗
23. Copper migration in CdTe heterojunction solar cells10.1007/BF02659909 ↗
24. Structural, morphological, optical and electrochromic properties of Ti-doped MoO3 thin films10.1016/j.solmat.2008.09.025 ↗
25. Structural, optical and electrochromic properties of Nb-doped MoO3 thin films10.1016/j.apsusc.2008.03.159 ↗
26. Assistance of partially reduced MoO3 interlayer to hole-injection at iron phthalocyanine/ITO interface evidenced by photoemission study10.1016/j.apsusc.2013.01.200 ↗
27. Epitaxial growth and properties of MoOx (2<x<2.75) films10.1063/1.1868852 ↗
28. ESCA studies of copper oxides and copper molybdates10.1016/0022-4596(78)90105-6 ↗
29. The influence of hydrogenation and oxygen vacancies on molybdenum oxides work function and gap states for application in organic optoelectronics10.1021/ja3026906 ↗
31. Ionization potential dependent air exposure effect on the MoO3/organic interface energy level alignment10.1016/j.orgel.2012.07.048 ↗
32. Thin-film metal oxides in organic semiconductor devices: their electronic structures, work functions and interfaces10.1038/am.2013.29 ↗
33. Ordered mesoporous metallic MoO2 materials with highly reversible lithium storage capacity10.1021/nl902423a ↗
34. Bube · 1983
35. Transport properties of polycrystalline silicon films10.1063/1.324477 ↗
36. The structural, optical, and electrical properties of vacuum evaporated Cu-doped ZnTe polycrystalline thin films10.1007/BF02655377 ↗
37. Prepartion, and structural, optical and electrical properties of the CdTe1-xSx system10.1007/BF00349059 ↗
38. Strategies to increase CdTe solar-cell voltage10.1016/j.tsf.2006.12.147 ↗
39. Effect of back-contact barrier on thin-film CdTe solar cells10.1016/j.tsf.2006.01.004 ↗
40. First-principles calculation of band offsets, optical bowings and defects in CdS, CdSe, CdTe and their alloys10.1063/1.372014 ↗
41. Effects of the Au/CdTe back contact on IV and CV characteristics of Au/CdTe/CdS/TCO solar cells10.1063/1.363946 ↗