Role of growth temperature in photovoltaic absorber CuSbSe2 deposition through e-beam evaporation
Source abstract
Abstract
Abstract In this study, CuSbSe2 chalcostibite thin films were deposited on glass substrates held at different temperatures using e-beam evaporation from the pre-synthesized CuSbSe2 bulk source material. Bulk CuSbSe2 source compound was synthesized by mechanical ball milling of constituent elements. Substrate temperature and growth condition were optimized to obtain the near stoichiometric chalcostibite thin films. Structural, morphological and optical properties of the synthesized thin films were investigated using x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), dynamic force microscopy (DFM), UV–vis–NIR spectroscopy and Raman spectroscopy. Positive value of the measured hall coefficient indicated the p-type nature of CuSbSe2 thin films having a carrier concentration of 5.6 × 1015 cm−3. The thin films were found to have a direct optical band gap (Eg) value of ~1.2 eV and absorption coefficient greater than 104 cm−1.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Status and perspectives on 100% renewable energy systems10.1016/j.energy.2019.03.092 ↗
2. A review of thin film solar cell technologies and challenges10.1016/j.rser.2016.12.028 ↗
3. Copper indium gallium selenide based solar cells - a review10.1039/C7EE00826K ↗
4. Strategic review of interface carrier recombination in earth abundant Cu-Zn-Sn-S-Se solar cells: current challenges and future prospects10.1039/C6TA10543B ↗
5. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
6. Inverse design of high absorption thin-film photovoltaic materials10.1002/aenm.201200538 ↗
7. Growth and characterization of chalcostibite CuSbSe2thin films for photovoltaic application10.1016/j.apsusc.2017.01.279 ↗
8. Cu3MCh3(M = Sb, Bi; Ch = S, Se) as candidate solar cell absorbers: insights from theory10.1039/c3cp52482e ↗
9. Crystallographic and optical properties of CuSbS2and CuSb(S1 -xSex)2solid solution10.1016/j.tsf.2014.11.029 ↗
10. Role of lone-pair electrons in producing minimum thermal conductivity in nitrogen-group chalcogenide compounds10.1103/PhysRevLett.107.235901 ↗
11. Ternary CuSbSe2chalcostibite: facile synthesis, electronic-structure and thermoelectric performance enhancement10.1039/C6TA00039H ↗
12. CuSbSe2thin film solar cells with ~4% conversion efficiency grown by low-temperature pulsed electron deposition10.1016/j.solmat.2018.05.024 ↗
13. Research Update: emerging chalcostibite absorbers for thin-film solar cells10.1063/1.5027862 ↗
14. Thin film solar cell based on CuSbS2 absorber fabricated from an electrochemically deposited metal stack10.1016/j.tsf.2013.11.046 ↗
15. Formation of CuSbS2 and CuSbSe2 thin films via chalcogenisation of Sb-Cu metal precursors10.1016/j.tsf.2011.01.140 ↗
16. Growth and vacuum post-annealing effect on the properties of the new absorber CuSbS2 thin films10.1016/j.matlet.2008.04.003 ↗
17. The influence of the precursor concentration on CuSbS2 thin films deposited from aqueous solutions10.1016/j.tsf.2006.12.046 ↗
18. Influences of solvents on morphology, light absorbing ability and photovoltaic performance of Sb 2 S 3 -sensitized TiO 2 photoanodes by chemical bath deposition method10.1007/s10854-013-1629-9 ↗
19. Solid state synthesis and e-beam evaporation growth of Cu2ZnSnSe4 for solar energy absorber applications10.1016/j.solener.2017.05.042 ↗
20. CuInxGa1-xSe2 thin films prepared by electron beam evaporation10.1016/j.solmat.2007.12.007 ↗
21. Thin-film solar cells: an overview10.1002/pip.541 ↗
22. Growth and characterization of CuSbSe2thin films prepared by electrodeposition10.1016/j.electacta.2012.05.066 ↗
23. One-step electrodeposition and annealing of CuSbSe2 thin films10.1149/2.007202esl ↗
24. Effect of pH-induced on the photosensitivity of non-toxic Cu2ZnSnS4 thin film by chemical bath deposition10.1016/j.ijleo.2017.03.121 ↗
25. Investigation of thermoelectric properties of chalcogenide semiconductors from first principles10.1063/1.3597823 ↗
26. CuSbSe2as a potential photovoltaic absorber material: studies from theory to experiment10.1002/aenm.201501203 ↗
27. Sb 2 Se 3 under pressure10.1038/srep02665 ↗
28. CuSbSe2 photovoltaic devices with 3% efficiency10.7567/APEX.8.082301 ↗
29. Progress in development of copper antimony sulfide thin films as an alternative material for solar energy harvesting10.1007/s10854-015-3092-2 ↗
30. Self-regulated growth and tunable properties of CuSbS2 solar absorbers10.1016/j.solmat.2014.09.041 ↗
31. High-temperature order/disorder transition in the thermoelectric Cu 3 SbSe 310.1557/jmr.2011.43 ↗
32. Shape-dependent optoelectrical investigation of Cu 2+x Cd 1−x SnS 4 thin films for solar cell applications10.1039/C5NJ03154K ↗
33. Liu · 2014
34. Mechanochemical bulk synthesis and e-beam growth of thin films of Sb2Se3 photovoltaic absorber10.1016/j.solener.2017.11.074 ↗
35. Contrastive investigation on linear optical properties and nonlinear absorption behaviors between Sb 2 Se 3 and Sb 2 Te 3 thin films
36. Order-disorder transition and Fano-interference in thermoelectric Cu3SbSe3 nanoparticles10.1016/j.matchemphys.2014.11.042 ↗
37. Sb2Se3 thin film solar cells in substrate configuration and the back contact selenization10.1016/j.solmat.2016.11.033 ↗
38. Characterization of CuSbSe2crystallites synthesized using a hot injection method10.1039/C6RA20692A ↗
39. Thermoelectric properties of nanocrystalline Cu3SbSe4 thin films deposited by a self-organized arrested precipitation technique10.1039/C5NJ00686D ↗
40. Ambient facile synthesis of gram-scale copper selenide nanostructures from commercial copper and selenium powder10.1021/acsami.5b01085 ↗
41. Colloidal synthesis and characterisation of Cu3SbSe3 nanocrystals10.1039/C4TA00085D ↗
42. Reactive close-spaced sublimation processed CuSbSe2 thin films and their photovoltaic application10.1063/1.5028415 ↗
43. Modulation of Seebeck coefficient for silicon-on-insulator layer induced by bias-injected carriers10.1063/1.4818152 ↗
44. Influence of heavy doping on Seebeck coefficient in silicon-on-insulator10.1063/1.3282783 ↗