journal article·2017-04

Preparation of TiO2 paste starting from organic colloidal suspension for semi-transparent DSSC photo-anode application

Isabella Zama, Christian Martelli, Giacomo Gorni

Publisher page

Abstract

Abstract We investigated the effect of different formulation strategies on the preparation of TiO2 screen printable pastes starting from the same organic colloidal suspension for dye-sensitized solar cells (DSSCs) application. As first strategy, we developed TiO2 pastes starting from nano-crystalline powder dried from the synthetized suspension, with and without an additional acid treatment, obtaining non-transparent scattering sintered layers. Instead, we demonstrate that starting from the sol solution is a key factor to obtain a well nano-dispersed TiO2 paste. The novel paste process resulted in a final homogeneous and semitransparent porous layer (T>80% @450–550 nm). In order to evaluate the properties of TiO2 powders and inks we performed thermal analysis, BET and FTIR measurements. The films were screen printed on FTO (fluorinedoped tin oxide) glass and characterized after sintering via profilometry, FE-SEM analysis and UVVis spectra measurements. The photo-anode was further validated in small (2 cm2) and large (90 cm2) active area DSSCs, giving an average photovoltaic efficiency respectively of 5,22% and 2,39%, comparable with commercially available TiO2 paste with similar composition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. The surface science of titanium dioxide10.1016/S0167-5729(02)00100-0 ↗
2. Synthesis of high porous electrospun hollow TiO2 nanofibers for bone tissue engineering application10.1016/j.jiec.2015.12.004 ↗
3. Preparation and characterization of titania nanoparticle produced from nanoparticle produced from Ti-flocculated sludge with paper mill wastewater10.1016/j.jiec.2011.02.022 ↗
4. Titanium Dioxide Nanomaterials: synthesis, Properties, Modifications, and Applications
5. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
6. Progress in emerging solution-processed thin film solar cells – Part II: perovskite solar cells10.1016/j.rser.2016.05.042 ↗
7. Park · J. Phys. Chem. B · 2000 · 104 · 204410.1021/jp993172v ↗
8. Mesoporous electrodes having tight agglomeration of single-phase anatase TiO2 Nano crystallites: application to dye-sensitized solar cells10.1016/S0927-0248(99)00166-X ↗
9. Large-scale synthesis of TiO2 nanorods via nonhydrolytic sol−gel ester elimination reaction and their application to photocatalytic inactivation of E. coli10.1021/jp052458z ↗
10. Nonaqueous sol–gel routes to metal oxide nanoparticles10.1021/ar600035e ↗
11. Sol-gel based TiO2 paste applied in screen-printed dye-sensitized solar cells and modules10.1016/j.jiec.2012.12.046 ↗
12. Mesoporous films prepared from synthesis TiO2 nanoparticles and their application in dye-sensitized solar cells (DSSCs)10.1016/j.electacta.2016.05.179 ↗
13. Preparation of high surface area TiO2 (anatase) by thermal hydrolysis of titanyl sulphate solution10.1016/S1466-6049(01)00171-4 ↗
14. Dye-sensitized solar cells based on a single-crystalline TiO2 nanorod film10.1021/jp055824n ↗
15. Synthesis and characterization of TiO2 nanoparticles by using new shape controllers and its application in dye sensitized solar cells10.1016/j.jiec.2014.01.003 ↗
16. A seeding method to change primary particles of oriented attachment network titanium dioxide for dye-sensitized solar cells10.1016/j.jpowsour.2014.05.049 ↗
17. Rapid (∼10min) synthesis of single-crystalline, nanorice TiO2 mesoparticles with a high photovoltaic efficiency of above 8%10.1039/c1cc12150b ↗
18. Size-controlled synthesis of anisotropic TiO2 single nanocrystals using microwave irradiation and their application for dye-sensitized solar cells10.1039/c2dt32663a ↗
19. Clean and time-effective synthesis of anatase TiO2 nanocrystalline by microwave-assisted solvothermal method for dye-sensitized solar cells10.1016/j.jpowsour.2013.08.104 ↗
20. Novel preparation method of TiO2-nanorod-based photoelectrodes for dye-sensitized solar cells with improved light-harvesting efficiency
21. Low-temperature synthesis of soluble and processable organic-capped anatase TiO2 nanorods10.1021/ja036505h ↗
22. Fabrication and properties of meso-macroporous electrodes screen-printed from mesoporous titania nanoparticles for dye-sensitized solar cells10.1016/j.matchemphys.2009.08.021 ↗
23. Photovoltaic enhancement of dye-sensitized solar cell prepared from [TiO2/ethyl cellulose/terpineol] paste employing TRITON™ X-based surfactant with carboxylic acid group in the oxyethylene chain end10.1016/j.matchemphys.2009.02.037 ↗
24. Conversion of light to electricity by cis-X2bis(2,2′-bipyridyl-4,4′-dicarboxylate)ruthenium(II) charge-transfer sensitizers (X=Cl-, Br-, I-, CN-, and SCN-) on nanocrystalline titanium dioxide electrodes10.1021/ja00067a063 ↗
25. Performance evaluation of DSC windows for buildings10.1016/j.buildenv.2011.03.010 ↗
26. Transmittance optimized nb-doped TiO2/Sn-doped In2O3 multi-layered photo electrodes for dye-sensitized solar cells10.1016/j.solmat.2011.09.011 ↗
27. Large area self-powered semitransparent trifunctional device combining photovoltaic energy production, lighting and dynamic shading control10.1016/j.solmat.2016.11.013 ↗
28. Process for the preparation of titanium dioxide with nanometric dimensions and controlled shape
29. Hetero-coagulation-spray drying process for the inclusion of ceramic pigments10.1016/j.jeurceramsoc.2007.06.014 ↗
30. Fabrication of Screen-Printing Pastes From TiO2 powders for dye-sensitised solar cells10.1002/pip.768 ↗
31. Effects of paste components on the properties of screen-printed porous TiO2 film for dye-sensitized solar cells10.1016/j.renene.2009.07.010 ↗
32. Evaluation of N719 amount in TiO2 films for DSSC by thermo gravimetric analysis10.1007/s10973-012-2436-x ↗
33. New interdigital design for large area dye solar modules using a lead-free glass frit sealing10.1002/pip.700 ↗
34. Photo-electrochemical solar cell module
35. Sealing agent with low softening temperature useful in the preparation of electronic devices
36. Dye-sensitized solar cells with conversion efficiency of 11.1%10.1143/JJAP.45.L638 ↗
37. The effect of electrolyte purification on the performance and long-term stability of dye-sensitized solar cells10.1149/2.0671509jes ↗
38. Limited grain-growth during annealing of Nano crystalline anatase used in photovoltaic solar cells10.1021/acs.cgd.5b00068 ↗
39. Device physics of dye solar cells10.1002/adma.201000726 ↗
40. Reaction pathway to the synthesis of anatase via the chemical modification of titanium isopropoxide with acetic acid10.1021/cm702286e ↗
41. Mesoporous TiO2 microbead electrodes for cobalt-mediator-based dye-sensitized solar cells10.1021/jp4113574 ↗
42. Key role of milling in the optimization of TiO2 Nano inks10.1557/jmr.2006.0188 ↗
43. One step preparation of TiO2 layer for high efficiency dye-sensitized solar cell10.1016/j.solmat.2008.11.012 ↗
44. Synthesis and characterization of mesoporous anatase TiO2 nanostructures via organic acid precursor process for dye-sensitized solar cells applications10.1016/j.jiec.2013.03.021 ↗
45. Effect of stabilizer on structural, optical and electrochemical properties of sol–gel derived spin coated TiO2 films10.1016/j.solmat.2004.10.006 ↗
46. XPS and FTIR investigation of the surface properties of different prepared titania nano-powders10.1016/j.apsusc.2004.11.015 ↗
47. Quasi-solid-state dye-sensitized solar cells employing nanocrystalline TiO2 films made at low temperature10.1016/j.solmat.2008.05.009 ↗
48. FTIR study of adsorption and photoreactions of acetic acid on TiO210.1039/b103419g ↗
49. Acid Adsorption on TiO2 Nanoparticles - an electrochemical properties study10.1021/jp711689u ↗
50. Screen-printing of surface layers
51. Controlled release PVC membranes: influence of phthalate plasticizers on their tensile properties and performance10.1002/pen.11428 ↗
52. Solvothermal synthesis of TiO2 Nano rods to enhance photovoltaic performance of dye-sensitized solar cells10.1016/j.solener.2016.03.025 ↗
53. Dependence of TiO2 film thickness on photocurrent-voltage characteristics of dye-sensitized solar cells10.5012/bkcs.2004.25.5.742 ↗
54. Study of dye-sensitized solar cells by scanning electron micrograph observation and thickness optimization of porous TiO2 Electrodes10.1155/2009/517609 ↗
55. Modeling of an equivalent circuit for dye-sensitized solar cells10.1063/1.1690495 ↗
56. A perspective on the production of dye-sensitized solar modules10.1039/C4EE01724B ↗
57. Dye-sensitized solar cells, from cell to module10.1016/j.solmat.2004.03.002 ↗
58. 100mm×100mm large-sized dye sensitized solar cells10.1016/j.jphotochem.2004.01.028 ↗
59. A. Hinsch, W. Veurman, H. Brandt, R. Loayza Aguirre, K. Bialecka, K. Flarup Jensen, Worldwide first fully up-scaled fabrication of 60cm×100cm dye solar module prototypes, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2011.10.1002/pip.1213 ↗
60. Development of large size dye-sensitized solar cell modules with high temperature durability10.1016/j.synthmet.2009.10.002 ↗
61. Integrated dye-sensitized solar cell module with conversion efficiency of 8.2%10.1063/1.3054160 ↗