Highly-transparent and conductive CuI films obtained by a redirected low-cost and electroless two-step route: Chemical solution deposition of CuS2 and subsequent iodination
Source abstract
Abstract
Abstract A simple, low-cost, electroless, and industrially scalable solution/vapor two-step strategy for the synthesis of highly-transparent and conductive CuI thin films is presented. The process is based in the coupling of the versatile chemical solution deposition technique to a gas–solid reaction method. It consists of the chemical deposition of CuS2 thin films (which can be performed over any kind of substrate) and their subsequent halidization by a gas–solid reaction with iodine vapor. The CuI obtained by this route is as transparent and conductive as the ones obtained by physical techniques coupled to an iodination reaction. Particularly, we present a 60-nm CuI sample obtained by iodination of a chemical-solution-deposited 21-nm CuS2, which is practically similar to the best reported in the literature, in terms of absence of the common frosted-glass-like appearance. The integrated transmittance in the visible region of this CuI thin film is 0.85, compared with the 0.91 of the glass slide used as a substrate, which is an indication of the high transparence of the synthesized CuI material. Hall-Effect and optical characterization of a thicker CuI thin film (146 nm) obtained by the solution/vapor two-step process presented here resulted in a p-type conductivity, a resistivity equal to 1.1 Ω cm, a hole concentration of 1.3 × 1019 cm–3, a hole mobility of 0.43 cm2/V·s, an integrated transmittance in the visible region of 0.65, and, according to the Z1,2 exciton absorption, an energy band gap of 3.05 eV. Analyses by XPS and XRD, as well as a rigorous chemical analysis and an accurate Rietveld refinement, confirmed that the composition of the obtained material is Cu0.85±0.06I with a zincblende structure, thus presenting copper vacancies; this composition explains the p-type conductivity of the synthesized material. All these results demonstrate that the two-step process presented here is a promising alternative to those including conventional physical techniques. The CuI thin films present enough quality to be studied for both photovoltaics and transparent electronics applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Transparent p-CuI/n-ZnO heterojunction diodes10.1063/1.4794532 ↗
2. Room-temperature Domain-epitaxy of copper iodide thin films for transparent CuI/ZnO Heterojunctions with high rectification ratios larger than 10910.1038/srep21937 ↗
3. Low-temperature fabrication and performance of polycrystalline CuI films as transparent p-type semiconductors
4. Room-temperature solution-synthesized p-Type Copper(I) iodide semiconductors for transparent thin-film transistors and complementary electronics10.1002/adma.201802379 ↗
5. Interface-induced crystalline ordering and favorable morphology for efficient annealing-free Poly(3-hexylthiophene): fullerene derivative solar cells10.1021/am3017653 ↗
6. Solution-processed copper iodide as an inexpensive and effective anode buffer layer for polymer solar cells10.1021/jp412784q ↗
7. P3HT: PC61BM based solar cells employing solution processed copper iodide as the hole transport layer10.1016/j.solmat.2014.11.004 ↗
8. Efficient organic solar cells using copper(I) iodide (CuI) hole transport layers10.1063/1.4922758 ↗
9. CuI as versatile hole-selective contact for organic solar cell based on anthracene-containing PPE–PPV10.1016/j.solmat.2015.07.003 ↗
10. Highly efficient organic solar cells based on a robust room-temperature solution-processed copper iodide hole transporter10.1016/j.nanoen.2015.07.018 ↗
11. Low band gap polymeric solar cells using solution-processable copper iodide as hole transporting layer10.1016/j.optmat.2016.03.040 ↗
12. Thickness dependence of a CuI hole transport layer on initial photostability and photovoltaic performance of organic solar cells10.1002/pssa.201600052 ↗
13. Self-assembled monolayer modified copper(I) iodide hole transport layer for efficient polymer solar cells, Chinese Phys
14. An inorganic hole conductor for Organo-Lead halide perovskite solar cells. improved hole conductivity with copper iodide10.1021/ja411014k ↗
15. Copper(I) iodide as hole-conductor in planar perovskite solar cells: probing the origin of J-V hysteresis10.1002/adfm.201502541 ↗
16. Low-cost solution-processed copper iodide as an alternative to PEDOT:PSS hole transport layer for efficient and stable inverted planar heterojunction perovskite solar cells10.1039/C5TA05286F ↗
17. Copper iodide as inorganic hole conductor for perovskite solar cells with different thickness of mesoporous layer and hole transport layer10.1016/j.apsusc.2015.09.215 ↗
18. Two-step physical deposition of a compact CuI hole-transport layer and the formation of an interfacial species in perovskite solar cells10.1002/cssc.201600132 ↗
19. Room-temperature and solution-processed copper iodide as the hole transport layer for inverted planar perovskite solar cells10.1039/C6NR04288K ↗
20. Efficient and stable inverted planar perovskite solar cells employing CuI as hole-transporting layer prepared by solid-gas transformation10.1002/ente.201700422 ↗
21. An emission spectrum of Cul crystal10.1143/JPSJ.21.1847 ↗
22. Electrical properties of CuI thin films10.1143/JJAP.10.864 ↗
23. Über die elektrische Leitfähigkeit und die thermoelektrische Kraft einiger Schwermetallverbindungen10.1002/andp.19073270409 ↗
24. Das elektrische Leitvermogen von festem Kupferjodur
25. Über eine eigentümliche Form elektrischen Leitvermögens
26. Über eine eigentümliche Form elektrischen Leitvermögens bei festen Körpern10.1002/andp.19093340807 ↗
27. Preparation of lead iodide films by iodination of chemically deposited lead sulphide films10.1016/0025-5408(82)90074-5 ↗
28. Preparation of bismuth iodide thin films by a chemical method10.1016/0167-577X(89)90008-6 ↗
29. A chemical method for preparing copper iodide thin films10.1143/JJAP.29.L352 ↗
30. The Crystalline State
31. Analysis of low mass absorption materials using glancing incidence X-ray diffraction
32. WinPLOTR: a windows tool for powder diffraction pattern analysis10.4028/www.scientific.net/MSF.378-381.118 ↗
33. Handbook of X-ray Photoelectron Spectroscopy: A Reference Book of Standard Spectra for Identification and Interpretation of XPS Data
34. Pankove · 1975
35. Chemical bath deposition of PbS thin films on float glass substrates using a Pb(CH3COO)2–NaOH–(NH2)2CS–N(CH2CH2OH)3–CH3CH2OH definite aqueous system and their structural, optical, and electrical/photoelectrical characterization10.1016/j.tsf.2013.02.035 ↗
36. Detailed characterization of good-quality SnS thin films obtained by chemical solution deposition at different reaction temperatures10.1016/j.mssp.2018.09.009 ↗
37. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
38. Recent developments of the program Fullprof
39. Rietveld refinement of Debye–Scherrer synchrotron X-ray data from Al2O310.1107/S0021889887087090 ↗
40. A correction for powder diffraction peak asymmetry due to axial divergence10.1107/S0021889894004218 ↗
41. J. Rodríguez-Carvajal, Study of micro-structural effects by powder diffraction using the program Fullprof. 〈http://www.cdifx.univ-rennes1.fr/fps/Microstructural_effects.pdf〉.
42. Determination of the degree of preferred orientation within the March–Dollase approach10.1107/S0021889809013727 ↗
43. A. Herrera-Gomez, The peak-fitting procedure was done with the software AAnalyzer®. 〈http://rdataa.com/aanalyzer/aanaHome.htm〉.
44. Practical methods for background subtraction in photoemission spectra10.1002/sia.5453 ↗
45. Quantitative analysis of the inelastic background in surface electron spectroscopy10.1002/sia.740110902 ↗
46. Universality classes of inelastic electron scattering cross-sections10.1002/(SICI)1096-9918(199703)25:3<137::AID-SIA230>3.0.CO;2-L ↗
47. Background subtraction: II. General behaviour of REELS and the Tougaard universal cross section in the removal of backgrounds in AES and XPS10.1016/S0039-6028(00)00373-3 ↗
48. Hartree-Slater subshell photoionization cross-sections at 1254 and 1487 eV10.1016/0368-2048(76)80015-1 ↗
49. Instrument-related geometrical factors affecting the intensity in XPS and ARXPS experiments10.1016/j.elspec.2011.08.002 ↗
50. Composition assessment of ferric oxide by accurate peak fitting of the Fe 2p photoemission spectrum10.1002/sia.6124 ↗
51. Detailed peak fitting analysis of the Zn 2p photoemission spectrum for metallic films and its initial oxidation stages10.1002/sia.6280 ↗
52. Effect of monochromator X-ray Bragg reflection on photoelectric cross section10.1016/j.elspec.2010.07.009 ↗
53. Atomic subshell photoionization cross sections and asymmetry parameters: 1<z<10310.1016/0092-640X(85)90016-6 ↗
54. C.J. Powell, A. Jablonski, NIST Electron Effective-Attenuation-Length Database - Version 1.3, National Institute of Standards and Technology, Gaithersburg, Maryland, 2011.
55. Truly transparent p-type γ-CuI thin films with high hole mobility10.1021/acs.chemmater.6b01358 ↗
56. Crystal structure of high-temperature cuprous iodide and cuprous bromide10.1016/0013-4686(77)80021-2 ↗
57. Crystallography Open Database (COD): an open-access collection of crystal structures and platform for world-wide collaboration10.1093/nar/gkr900 ↗
58. Crystallography Open Database – an open-access collection of crystal structures10.1107/S0021889809016690 ↗
59. First-principles study of γ-CuI for p-type transparent conducting materials10.1088/0022-3727/45/14/145102 ↗
60. First-principles study of point defects in solar cell semiconductor CuI10.1016/j.physb.2012.11.045 ↗
61. Partial p and d densities of states in CuI determined by ultraviolet photoemission10.1016/0038-1098(74)90539-0 ↗
62. Density of valence states of CuCl, CuBr, CuI, and AgI10.1103/PhysRevB.10.4388 ↗
63. Native p-type transparent conductive CuI via intrinsic defects10.1063/1.3633220 ↗
64. Structure-property relationships in cubic cuprous iodide: a novel view on stability, chemical bonding, and electronic properties10.1063/1.4975176 ↗
65. Bane to boon: tailored defect induced bright red luminescence from cuprous iodide nanophosphors for on-demand rare-earth-free energy-saving lighting applications10.1039/C5TC00719D ↗
66. Effect of deposition temperature on transparent conductive properties of γ-CuI film prepared by vacuum thermal evaporation, Phys. Status Solidi Appl
67. CuI by XPS10.1116/1.1247734 ↗