Study of SiC and Si3N4 inclusions in industrial multicrystalline silicon ingots grown by directional solidification method
Source abstract
Abstract
Abstract In directional solidification of multicrystalline silicon ingots for solar cells, the concentration of C and N impurities in the silicon melts increases with progression of solidification due to their relatively low segregation coefficients. In the case of supersaturation of C and N in silicon melts, SiC and Si3N4 inclusions are formed. In this work, a piece of multicrystalline silicon was selected from a central block, which was cut out from an industrial multicrystalline silicon ingot grown by directional solidification method. The distribution of SiC and Si3N4 inclusions from the top to bottom regions was systematically studied. It was found that majority of SiC and Si3N4 inclusions are present in the top region and the amount of inclusions decreases exponentially from the top surface down to the bulk of the ingot. Morphologies and characteristics of the SiC and Si3N4 inclusions were investigated. The presence of SiC and Si3N4 inclusions generates high density of dislocations in multicrystalline silicon, and sometimes can also introduce pores into multicrystalline silicon. The results of this work will be of practical interest to the photovoltaic industry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Luque · 2003
2. Patel · 2006
3. A vision for crystalline silicon photovoltaics10.1002/pip.709 ↗
4. Behavior of light impurity elements in the production of semiconductor silicon10.1007/BF02515271 ↗
5. Electrical effects of SiC inclusions in EFG silicon ribbon solar cells10.1063/1.322980 ↗
6. SiC and Si3N4 inclusions in multicrystalline silicon ingots10.1016/j.mssp.2004.05.001 ↗
7. Electronic activity of SiC precipitates in multicrystalline solar silicon10.1002/pssa.200675436 ↗
8. Investigation of foreign particles in polycrystalline silicon using infrared microscopy
9. Hard inclusions and their detrimental effects on the wire sawing process of multicrystalline silicon10.1016/j.solmat.2007.06.001 ↗
10. Wire-sawing defects on multicrystalline silicon wafers grown by a directional solidification method10.1088/0268-1242/23/5/055011 ↗
11. Recycling of solar cell silicon scraps through filtration, part I: experimental investigation10.1016/j.solmat.2008.06.006 ↗
12. Directional solidification of polycrystalline silicon ingots by successive relaxation of supercooling method10.1016/j.jcrysgro.2007.06.035 ↗
13. On wafer investigation of SiC and Si3N4 inclusions in multicrystalline Si grown by directional solidification10.1016/j.solmat.2008.03.007 ↗
14. TEM study of SiC particles and filaments precipitated in mc Si for solar cells10.1016/j.solmat.2008.04.016 ↗
15. 1982
16. Influence of dislocations on photovoltaic properties of multicrystalline silicon solar cells
17. The growth of β-Si3N4 single crystals10.1016/0022-0248(79)90123-4 ↗
18. N–Si (nitrogen–silicon)10.1007/s11669-005-0125-1 ↗