Critical failure of flexible perovskite solar mini-module by water vapor ingress under prolonged damp-heat test over 4000 h
Source abstract
Abstract
The understanding of moisture-induced degradation is one of the major issues towards long-term stability of perovskite solar cells (PSCs) which severely limit their practical use. Herein, the degradation behavior of photovoltaic performance on water ingress of flexible methylammonium lead halide (MAPbI 3 ) PSC mini-modules with 3 × 3 cm 2 in size was discussed. For this purpose, the modules proceed the damp-heat (DH) test up to 4650 h at 85 °C/85 % relative humidity and water ingress was systematically controlled by varying water vapor transmission rates (WVTRs) of the barrier film from 0.005 to 0.44 g/m 2 /day. Upon DH testing, the evolution of solar cell parameters revealed that the power conversion efficiency (PCE) was gradually reduced over DH time. Remarkably, encapsulation with barrier films of high WVTRs (0.019–0.44 g/m 2 /day) caused ‘critical failure’ of module efficiency, evidently observed at the same level of accumulated water vapor. The phase decomposition emphasized that the critical failure mainly stemmed from the partial formation of intermediate MAPbI 3 monohydrate due to the water vapor permeated into encapsulated module, particularly in cases with high WVTRs. This hydrate intermediate accelerated the perovskite decomposition and suddenly reduced its module lifetime. On the other hand, the module encapsulated using a proper barrier film with low WVTR of 0.005 g/m 2 /day exhibited outstanding module stability by nearly 80 % of PCE upon 2700 h of DH test and no critical failure. This finding demonstrated significant improvement in module durability through the selection of barrier films, thereby extending the device lifetime and enhancing its long-term suitability for the potential application in photovoltaic industry. • The degradation mechanism of flexible perovskite solar cell (PSC) mini-modules was systematically studied under damp-heat testing, representing degradation behaviors of modules under commercial-scale production. • The ‘critical failure’ of module efficiency, caused by the decomposition of absorber layer was obviously detected in encapsulated modules with low-qualitied barrier film. • The proper encapsulation by high-qualitied barrier film effectively mitigated moisture-induced degradation, leading to an outstanding long-term stability up to 4650 h of DH testing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Organic Electronics and Photovoltaics · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. High-efficiency perovskite solar cells10.1021/acs.chemrev.0c00107 ↗
2. Recent advances in the combined elevated temperature, humidity, and light stability of perovskite solar cells10.1002/solr.202200772 ↗
3. 2025
4. Halide perovskite photovoltaics: background, status, and future prospects10.1021/acs.chemrev.8b00539 ↗
5. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
6. Review on efficiency improvement effort of perovskite solar cell10.1016/j.solener.2022.01.060 ↗
7. Recent progress in the development of high-efficiency inverted perovskite solar cells10.1038/s41427-023-00474-z ↗
8. Stability of perovskite solar cells: issues and prospects10.1039/D2RA05903G ↗
9. Light-induced degradation of CH3NH3PbI3 hybrid perovskite thin film10.1021/acs.jpcc.6b11853 ↗
10. Unraveling the light-induced degradation mechanisms of CH3NH3PbI3 perovskite films10.1002/aelm.201700158 ↗
11. A review: thermal stability of methylammonium lead halide based perovskite solar cells10.3390/app9010188 ↗
12. Thermal stability test on flexible perovskite solar cell modules to estimate activation energy of degradation on temperature10.1016/j.solmat.2024.113148 ↗
13. The impact of moisture on the stability and degradation of perovskites in solar cells10.1039/D3MA00828B ↗
14. Understanding degradation mechanisms and improving stability of perovskite photovoltaics10.1021/acs.chemrev.8b00336 ↗
15. Investigating the stability of flexible perovskite solar cell modules in heat and damp-heat environments10.1016/j.solmat.2025.113410 ↗
16. Perovskite solar cell modules: understanding the device degradation via damp heat testing10.1016/j.solener.2024.113174 ↗
17. Recent efficient strategies for improving the moisture stability of perovskite solar cells10.1039/C7TA01325F ↗
18. Accelerated degradation of FAPbI3 perovskite by excess charge carriers and humidity10.1002/solr.202300958 ↗
19. Insights into structural and morphological properties of flexible perovskite solar modules with different barrier film under damp-heat test
20. Understanding and mitigating the degradation of perovskite solar cells based on a nickel oxide hole transport material during damp heat testing10.1021/acsami.3c02709 ↗
21. Peptide-based ammonium halide with inhibited deprotonation enabling effective interfacial engineering for highly efficient and stable FAPbI3 perovskite solar cells
22. Surface chemical conversion of residual PbI2 enables efficient and stable perovskite solar cells by 1,3-diphenyl-benzimidazolium iodide treatment10.1002/adfm.202418792 ↗
23. Encapsulation and stability testing of perovskite solar cells for real life applications10.1021/acsmaterialsau.1c00045 ↗
24. Series resistance measurements of perovskite solar cells using JSC–VOC measurements10.1002/solr.201800378 ↗
25. Key degradation mechanisms of perovskite solar cells and strategies for enhanced stability: issues and prospects10.1039/D4RA07942F ↗
26. Insights into accelerated degradation of perovskite solar cells under continuous illumination driven by thermal stress and interfacial junction10.1021/acsaem.1c02037 ↗
27. Recent progress on the stability of perovskite solar cells in a humid environment10.1021/acs.jpcc.0c08019 ↗
28. The importance of moisture in hybrid lead halide perovskite thin film fabrication10.1021/acsnano.5b03626 ↗
29. Semitransparent FAPbI3-Br perovskite solar cells stable under simultaneous damp heat (85°C/85%) and 1 sun light soaking10.1002/admt.201800390 ↗
30. Shunt-blocking layers for semitransparent perovskite solar cells10.1002/admi.201500837 ↗
31. Effective encapsulation and surface treatment for damp-heat stable triple cation perovskite solar sells10.1002/solr.202300825 ↗
32. Efficient and stable MAPbI3-based perovskite solar cells using polyvinylcarbazole passivation10.1021/acs.jpclett.0c01776 ↗
33. Formation dynamics of CH3NH3PbI3 perovskite following two-step layer deposition10.1021/acs.jpclett.5b02495 ↗
34. Interaction of organic cation with water molecule in perovskite MAPbI3: from dynamic orientational disorder to hydrogen bonding10.1021/acs.chemmater.6b02883 ↗
35. Reversible hydration of CH3NH3PbI3 in films, single crystals, and solar cells10.1021/acs.chemmater.5b00660 ↗
36. Perovskite solar cell stability in humid air: partially reversible phase transitions in the PbI2‐CH3NH3I‐H2O system10.1002/aenm.201600846 ↗
37. The role of MAPbI3 hydrate in triple mesoscopic stack minimodules: the key to elongating outdoor lifespan10.1039/D5EL00076A ↗
38. Humidity-induced degradation via grain boundaries of HC(NH2)2PbI3 planar perovskite solar cells10.1002/adfm.201705363 ↗