Low-damage grinding process of gallium oxide based on cerium oxide
Source abstract
Abstract
The ultra-wide bandgap semiconductor material β -Ga 2 O 3 exhibits potential in power devices and UV detectors. However, its hard and brittle characteristics and cleavage properties result in severe damage during processing. This study used cerium oxide (CeO 2 ) in an alkaline solution to grind β -Ga 2 O 3 . The (010) β -Ga 2 O 3 exhibited less surface and subsurface damage (SSD), although it encountered significant SSD during processing. SEM of (010) β -Ga 2 O 3 cross sections showed that the SSD caused by CeO 2 is plastic slip. Median cracks with a depth of less than 1 μm were only observed in some areas. In contrast, diamond produces microcrack defects in the subsurface up to a depth of 2 μm. When grinding with CeO 2 , bonds of Ga-O-Ce are formed with active oxygen on the surface of β -Ga 2 O 3 . The material is removed by combining mechanical and “chemical tooth” models. A characteristic peak of this structure appears at 530.01 eV in the O 1s spectrum of the sample's XPS . The mechanical action of CeO 2 deforms the surface structure, removing surface damage through ductile domain removal. After 3 h of CMP , the FWHM of the rocking curve for the CeO 2 ground sample decreased from 668 ± 20 ″ to 61 ± 5 ". In contrast, the diamond ground sample only reduced from 643 ± 23 ″ to 210 ± 8 ". This decreased rate for the CeO 2 sample was significantly higher than for the diamond. The method eliminates the damage by combining actions, reducing new damage. It has research value and economic benefits for optimizing the process and obtaining damage-free β -Ga 2 O 3 substrates.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ga2O3 and related materials · Magnesium Oxide Properties and Applications · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Metal atoms adsorbed Ga2O3 monolayer: as a potential application in optoelectronic devices10.1016/j.micrna.2023.207613 ↗
2. A strategic review on gallium oxide based power electronics: recent progress and future prospects
3. A general strategy to ultrasensitive Ga2O3 based self-powered solar-blind photodetectors
4. Review of Ga2O3-based optoelectronic devices
5. State-of-the-art technologies of gallium oxide power devices10.1088/1361-6463/aa7aff ↗
6. 2-inch diameter (1 0 0) β-Ga2O3 crystal growth by the vertical Bridgman technique in a resistance heating furnace in ambient air10.1016/j.jcrysgro.2020.125724 ↗
7. Discovery of new polymorphs of gallium oxides with particle swarm optimization‐based structure searches10.1002/aelm.202000119 ↗
8. The structure of low-index surfaces of β-Ga2O310.1016/j.chemphys.2005.08.051 ↗
9. Analysis of the grinding characteristics of β-Ga 2 O 3 crystal on different planes10.1142/S0219686720500122 ↗
10. Effect of abrasive grit shape on polishing of β-Ga2O3(100) substrate10.1016/j.precisioneng.2019.10.003 ↗
11. Effect of chemical action on the chemical mechanical polishing of β-Ga2O3(100) substrate10.1016/j.precisioneng.2018.11.013 ↗
12. Optimization of chemical mechanical polishing of (010) β-Ga 2 O 310.1116/6.0002241 ↗
13. Development of large diameter semi-insulating gallium oxide (Ga2O3) substrates10.1109/TSM.2019.2944526 ↗
14. Powder synthesis of nano grade cerium oxide via homogenous precipitation and its polishing performance10.1016/j.mseb.2003.11.024 ↗
15. The effect of the calcination process on the crystallite shape of sol-gel cerium oxide used for glass polishing10.1007/BF00353051 ↗
16. Preparation of Ce-doped colloidal SiO2 composite abrasives and their chemical mechanical polishing behavior on sapphire substrates10.1016/j.matchemphys.2015.12.026 ↗
17. Synthesis, characterization of CeO2@SiO2 nanoparticles and their oxide CMP behavior10.1016/j.mee.2009.09.012 ↗
18. A review on the development of ceria for chemical mechanical polishing10.1016/j.powtec.2024.119989 ↗
19. Lapping assisted dissolved wafer process of silicon for MEMS structures10.1007/s10854-014-1833-2 ↗
20. Y. Wang, S. Liu, G. Peng, S. Zhou, J. Xu, Effects of Surface Treatment on Sapphire Substrates, (n.d.).
21. Ewing, J. A., Rosenhain, W, Bakerian lecture.—the crystalline structure of metals, Ings of the Royal Society of London 65 (n.d.) 172–177.10.1098/rspl.1899.0021 ↗
22. Near valence-band electronic properties of semiconducting β − Ga 2 O 3 (100) single crystals10.1103/PhysRevB.92.195306 ↗
23. Fundamental investigation of chemical mechanical polishing of GaAs in silica dispersions: material removal and arsenic trihydride formation pathways10.1149/2.008311jss ↗
24. Analysis on the electronic trap of β-Ga2O3 single crystal10.1007/s10853-019-03777-1 ↗
25. Chemical processes in glass polishing10.1016/0022-3093(90)90200-6 ↗
26. Performance characterization of cerium oxide abrasives for chemical-mechanical polishing of glass10.1080/10940340008945708 ↗
27. Characterization by XPS and XAS of supported Pt/TiO 2 CeO 2 catalysts10.1002/sia.740160173 ↗
28. Doping strategy on properties and chemical mechanical polishing performance of CeO2 Abrasives: a DFT assisted experimental study10.1016/j.apsusc.2023.156997 ↗