journal article·2024-06Open access

Annealing-free, electron-selective ohmic contacts using zirconium oxide and aluminum for n-type crystalline silicon solar cells

Loay Akmal Madbouly, Hisham Nasser, Mona Zolfaghari Borra, Emine Hande Ciftpinar, Gokhan Altiner, Atescan Aliefendioglu, Hasan Huseyin Canar, Rasit Turan, Husnu Emrah Unalan

Abstract

The challenge of Fermi-level pinning significantly complicates the establishment of Ohmic, low-resistance contacts for lightly doped n-type crystalline silicon (c-Si), a critical requirement for economically feasible device development. In this novel study, we present an innovative approach by introducing an ultra-thin zirconium oxide (ZrOx) film to achieve an Ohmic contact in n-type c-Si. The ZrOx films are deposited through e-beam evaporation at room temperature, and their properties are characterized using spectroscopic ellipsometry (SE), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and contact resistivity (rho c) measurements. Our investigation unveiled a pronounced dependence of the contact resistivity on the thickness of the ZrOx layer, with the lowest rho c value of 22 m Omega cm2 achieved with an ultrathin 1 nm ZrOx film. To demonstrate our study's feasibility, we applied ZrOx as an electron-selective rear-side contact layer in a lightly doped n-type c-Si solar cell with a boron-diffused emitter on the front side. This yielded a photovoltaic conversion efficiency (PCE) of 16% and a notable fill factor (FF) exceeding 79%. These findings clearly emphasized the significant promise of ZrOx as an emerging and highly effective electron-selective contact layer for lightly doped n-type c-Si devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
2. Charge carrier separation in solar cells10.1109/JPHOTOV.2014.2363550 ↗
3. Improved parameterization of auger recombination in silicon10.1016/j.egypro.2012.07.034 ↗
4. Current losses at the front of silicon heterojunction solar cells10.1109/JPHOTOV.2011.2174967 ↗
5. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
6. Titanium dioxide/silicon hole-blocking selective contact to enable double-heterojunction crystalline silicon-based solar cell10.1063/1.4916540 ↗
7. Tantalum oxide electron-selective heterocontacts for silicon photovoltaics and photoelectrochemical water reduction10.1021/acsenergylett.7b01153 ↗
8. Atomic-layer deposited Nb2O5 as transparent passivating electron contact for c-Si solar cells10.1016/j.solmat.2018.04.037 ↗
9. Tantalum nitride electron‐selective contact for crystalline silicon solar cells10.1002/aenm.201800608 ↗
10. Titanium nitride electron-conductive contact for silicon solar cells by Radio frequency sputtering from a TiN target10.1021/acsami.0c04439 ↗
11. A novel passivating electron contact for high-performance silicon solar cells by ALD Al-doped TiO210.1016/j.solener.2021.09.083 ↗
12. Carrier-selective interlayer materials for silicon solar cell contacts10.1063/1.5020056 ↗
13. Magnesium thin film as a doping-free back surface field layer for hybrid solar cells
14. Lithium fluoride based electron contacts for high efficiency n-type crystalline silicon solar cells10.1002/aenm.201600241 ↗
15. Magnesium fluoride electron-selective contacts for crystalline silicon solar cells10.1021/acsami.6b03599 ↗
16. The role of a LiF layer on the performance of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/Si organic-inorganic hybrid solar cells10.1063/1.4866968 ↗
17. Fourteen percent efficiency ultrathin silicon solar cells with improved infrared light management enabled by hole‐selective transition metal oxide full‐area rear passivating contacts10.1002/pip.3510 ↗
18. Molybdenum and tungsten oxide: high work function wide band gap contact materials for hole selective contacts of silicon solar cells10.1016/j.solmat.2015.05.031 ↗
19. Atomic layer deposition of vanadium oxide as hole‐selective contact for crystalline silicon solar cells10.1002/aelm.202000467 ↗
20. Improved surface passivation and reduced parasitic absorption in PEDOT:PSS/c-Si heterojunction solar cells through the admixture of sorbitol10.1038/s41598-019-46280-y ↗
21. Sputter-deposited WOx and MoOx for hole selective contacts10.1016/j.egypro.2017.09.259 ↗
22. Carrier selective solution processed molybdenum oxide silicon heterojunctions solar cells with over 12% efficiency10.1088/1361-6641/ab8c29 ↗
23. Atomic layer deposition of vanadium oxide as hole‐selective contact for crystalline silicon solar cells10.1002/aelm.202000467 ↗
24. ZrO2 thin films on Si substrate10.1007/s10854-010-0144-5 ↗
25. Zirconium oxide surface passivation of crystalline silicon10.1063/1.5032226 ↗
26. Effect of nanostructured porous n+ GaAs substrates on the energy band gap of nanocrystalline TiO2 thin films analyzed by spectroscopic ellipsometry10.1016/j.physe.2010.07.014 ↗
27. Optical properties of zinc-oxide films determined UsingSpectroscopic ellipsometry with various dispersion models10.3938/jkps.55.1227 ↗
28. Ohmic contacts for GaAs devices10.1016/0038-1101(67)90063-9 ↗
29. Kane · 1985
30. Electronic structures and optical properties of monoclinic ZrO 2 studied by first-principles local density approximation + U approach10.1007/s40145-016-0216-y ↗
31. Extraction of Schottky diode parameters from forward current‐voltage characteristics10.1063/1.97359 ↗
32. Zirconium dioxide thin films characterized by XPS10.1116/1.1375573 ↗
33. Parasitic absorption in the rear reflector of a silicon solar cell: simulation and measurement of the sub-bandgap reflectance for common dielectric/metal reflectors10.1016/j.solmat.2013.06.024 ↗
34. On the application of Hole‐selective Moox as full‐area rear contact for industrial scale P‐Type C‐Si Solar Cells10.1002/pip.3363 ↗
35. Thin-film metal oxides in organic semiconductor devices: their electronic structures, work functions and interfaces10.1038/am.2013.29 ↗
36. Surface states and rectification at a metal semi-conductor contact10.1103/PhysRev.71.717 ↗
37. Halbleitertheorie der Sperrschicht10.1007/BF01774216 ↗
38. Tuning of Schottky barrier height of Al/n-Si by electron beam irradiation10.1016/j.apsusc.2017.02.189 ↗
39. Fermi-level unpinning and low resistivity in contacts to N-type GE with a thin ZnO interfacial layer10.1063/1.4764909 ↗
40. Implementation of ALD-grown mgo layers as electron-selective contact for silicon solar cells
41. Stable dopant-free asymmetric heterocontact silicon solar cells with efficiencies above 2010.1021/acsenergylett.7b01279 ↗
42. Molybdenum oxide MoOx: a versatile hole contact for silicon solar cells10.1063/1.4903467 ↗
43. Solution-processed and annealing-free zirconium acetylacetonate electron-selective contacts for efficient crystalline silicon solar cells10.1016/j.solener.2020.12.048 ↗