journal article·2022-08

Nanoindentation characterization of thin film stack structures by finite element analysis and experiments using acoustic emission testing

Chen Liu, Oliver Nagler, Florian Tremmel, Marianne Unterreitmeier, Jessica J. Frick, X. Wendy Gu, Debbie G. Senesky

Publisher page

Abstract

Increased risk of crack formation in the brittle insulating layers of crack-sensitive backend-of-line (BEOL) structures in semiconductor integrated circuits during wafer probing or wire bonding process is detrimental to product reliability. This paper describes the use of a high-resolution, in-situ material testing system that integrates acoustic emission (AE) testing with a nanoindentation system, as well as the finite element analysis (FEA) simulation method, for faster characterization of BEOL structures to optimize the reliability of wafer probing and wire bonding processes. This hybrid testing system is used to determine the critical load of thin film stack structures with Al-Cu input/output (I/O) pads, insulating layers, and the embedded Cu layers. Cracks were induced during the nanoindentation, and scanning electron microscopy (SEM) confirmed the formation and propagation of cracks in the insulating layers below the I/O pad. Finite element analysis (FEA) simulation was carried out to evaluate the contact-related stress distribution and obtain the critical stress by replicating the nanoindentation process to fully understand the critical conditions that lead to brittle fracture in insulating layers. Multiple thin film stack structures with different layer thicknesses are tested by experiment and correlated with simulation in parameter studies. We observed that as the thickness of the insulating layer increases and as the thickness of the embedded copper layer decreases, the critical loads will increase, which is in good agreement with previous studies. We also discovered that the critical loads of structures with thicker metal pads are not always higher than the thinner ones, which means the thicker metal pads do not certainly protect the structures better, as previous studies discovered.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Integrated Circuits and Semiconductor Failure Analysis · Advanced Surface Polishing Techniques · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Bond pad structure reliability
2. Effects of probe damage on wire bond integrity
3. Use of harsh wafer probing to evaluate traditional and CUP bond pad structures10.1109/TCPMT.2012.2236384 ↗
4. Use of harsh wafer probing to evaluate various bond pad structures
5. Use of harsh wire bonding to evaluate various bond pad structures
6. Study of optimum bond pad metallization thickness for copper wire bond process
7. Copper wire bond analysis: pad design effects and process considerations
8. Numerical simulation of top metal thickness on IMD stress due to probing
9. Mechanical analysis of wafer testing with FEM simulations10.1016/j.microrel.2016.06.006 ↗
10. Influence of indenter tip diameter and film thickness on flat indentations into elastic-plastic films by means of the finite element method10.1016/j.tsf.2018.03.016 ↗
11. Simulation of ball bonding on various bond pad structures
12. Characterization of critical conditions for fracture during wafer testing by FEM and experiments10.1016/j.mssp.2017.05.020 ↗
13. Review of FIB-tomography
14. Scanning electron microscope: advantages and disadvantages in imaging components[J]10.20546/ijcmas.2017.605.207 ↗
15. Cluster-based acoustic emission signal processing and loading rate effects study of nanoindentation on thin film stack structures10.1016/j.ymssp.2021.108301 ↗
16. An acoustic emission sensor system for thin layer crack detection10.1016/j.microrel.2018.07.015 ↗
17. Unterreitmeier · 2020
18. Finite element simulation of the effect of surface roughness on nanoindentation of thin films with spherical indenters10.1016/j.surfcoat.2007.07.038 ↗
19. Finite element simulation of microindentation10.1134/S0036029517050123 ↗
20. Comparison between Berkovich, Vickers and conical indentation tests: a three-dimensional numerical simulation study10.1016/j.ijsolstr.2008.10.032 ↗
21. System and method for examining semiconductor substrates
22. 2001
23. Tensile and fatigue strength of ultrathin copper films10.1016/j.msea.2007.02.132 ↗
24. The determination of the elastic modulus of microcantilever beams using atomic force microscopy10.1023/A:1004712007729 ↗
25. An investigation of hardness and adhesion of sputter-deposited aluminum on silicon by utilizing a continuous indentation test[J]10.1557/JMR.1988.0141 ↗
26. Mechanical properties of thin films10.1007/BF02666659 ↗
27. Strain measurements of silicon dioxide microspecimens by digital imaging processing10.1007/s11340-006-9010-z ↗
28. Measurement of elastic modulus, Poisson ratio, and coefficient of thermal expansion of on-wafer submicron films10.1063/1.370146 ↗
29. Optimization of a low-stress silicon nitride process for surface-micromachining applications10.1016/S0924-4247(96)01397-0 ↗
30. The mechanical properties of electroplated Cu thin films measured by means of the bulge test technique
31. Residual stress and mechanical properties of boron-doped p+-silicon films
32. Understanding pop-ins in spherical nanoindentation10.1063/1.4898698 ↗
33. A review of Finite Fracture Mechanics: crack initiation at singular and non-singular stress raisers[J]10.1007/s00419-015-1091-7 ↗
34. Analysis of Hertzian indentation fracture in the framework of finite fracture mechanics10.1007/s10704-017-0201-7 ↗
35. Shackelford · 2000
36. Materials issues in microelectromechanical systems (MEMS)10.1016/S1359-6454(99)00294-3 ↗
37. Comparison of tensile and bulge tests for thin-film silicon nitride10.1007/BF02427976 ↗
38. Fracture tests of etched components using a focused ion beam machine10.1117/12.395707 ↗
39. Wafer-level mechanical characterization of silicon nitride MEMS10.1109/JMEMS.2004.839315 ↗
40. Tensile testing of SiO2 and Si3N4 films carried out on a silicon chip10.1016/S0924-4247(99)00364-7 ↗
41. Tensile testing of insulating thin films; Humidity effect on tensile strength of SiO2 films10.1016/S0924-4247(99)00363-5 ↗
42. Fracture toughness, fracture strength, and stress corrosion cracking of silicon dioxide thin films[J]10.1109/JMEMS.2008.927069 ↗