journal article·2022-08

Fabrication of a hole transporting Cu2AgIn(S0.5Se0.5)4 nanoparticles deposited carbon counter electrode for perovskite solar cell

Pratheep Panneerselvam, JohnZhanhu Guo, Subramania Angaiah

Publisher page

Abstract

In the present study, a quaternary Cu-based chalcopyrite semiconductor, Cu 2AgIn(S 0.5Se 0.5) 4 (CAISSe) nanoparticles (NPs) was synthesized by a hot injection method. X-ray diffraction (XRD) and Raman spectroscopy studies were carried out to finding the formation of tetragonal crystal structure of synthesized CAISSe NPs. HR-TEM analysis revealed the spherical morphology of the synthesized CAISSe NPs. The charge separation and carrier dynamics of the perovskite with CAISSe NPs deposited on pearl carbon were analyzed by photoluminescence (PL) studies. The intensity of PL spectrum was reduced for CAISSe NPs deposited on pearl carbon than the pristine pearl carbon. By adding sulfur with selenium influences, the device performance was further discussed. A comprehensive analysis of impedance spectroscopy was subsequently carried out to understand the charge transferring nature of perovskite/CAISSe@C CE interface. The higher PCE (η = 4.64%) is obtained for CAISSe NPs deposited pearl carbon CE based PSC than that of pristine pearl carbon CE based PSC (η = 2.69%).
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Perovskite Materials and Applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Laboratory · 2020
2. Progress in materials development for the rapid efficiency advancement of perovskite solar cells10.1002/smll.201907531 ↗
3. Progress in photovoltaics perovskite solar cells : a porous graphitic carbon based hole transporter/counter electrode material extracted from an invasive plant species Eichhornia Crassipes10.1038/s41598-020-62900-4 ↗
4. Bio-inspired carbon hole transporting layer derived from aloe vera plant for cost-effective fully printable mesoscopic carbon perovskite solar cells10.1021/acsami.8b08383 ↗
5. A manufacturing cost estimation method with uncertainty analysis and its application to perovskite on glass photovoltaic modules10.1002/pip.2871 ↗
6. Cost analysis of perovskite tandem photovoltaics cost analysis of perovskite tandem photovoltaics10.1016/j.joule.2018.05.001 ↗
7. Performance of WO3-incorporated carbon electrodes for ambient mesoscopic perovskite solar cells10.1021/acsomega.9b02934 ↗
8. Enhanced hole transfer in hole-conductor-free perovskite solar cells via incorporating CuS into carbon electrodes10.1016/j.apsusc.2018.08.078 ↗
9. NiO@carbon spheres: a promising composite electrode for scalable fabrication of planar perovskite solar cells at low cost10.1016/j.nanoen.2018.11.004 ↗
10. Hole selective NiO contact for efficient perovskite solar cells with carbon electrode10.1021/nl504701y ↗
11. P-type CuI islands on TiO2 electron transport layer for a highly efficient planar-perovskite solar cell with negligible hysteresis
12. Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%10.1126/science.aam5655 ↗
13. Effect of the post-annealing temperature on the thermal-decomposed NiOx hole contact layer for perovskite solar cells10.1142/S2010135X18500066 ↗
14. MoS2 quantum dot/graphene hybrids for advanced interface engineering of a CH3NH3PbI3 perovskite solar cell with an efficiency of over 20%10.1021/acsnano.8b05514 ↗
15. PbS colloidal quantum dots as an effective hole transporter for planar heterojunction perovskite solar cells
16. Nickel sulphide-carbon composite hole transporting material for (CH3NH3PbI3) planar heterojunction perovskite solar cell10.1016/j.matlet.2018.03.161 ↗
17. Nitrogen doped cuprous oxide as low cost hole-transporting material for perovskite solar cells10.1016/j.scriptamat.2018.04.049 ↗
18. Colloidal Cu2ZnSn(S1-x,Sex)4 -Au nano-heterostructures for inorganic perovskite photovoltaic applications as photocathode alternative10.1016/j.jcis.2018.12.100 ↗
19. Carrier transport and surface potential over phase variations in the surface and bulk of highly efficient Cu2ZnSn(S,Se)4 solar cells10.1002/pip.3248 ↗
20. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
21. Cu2AgInSe4 QDs sensitized electrospun porous TiO2 nano fibers as an efficient photoanode for quantum dot sensitized solar cells10.1016/j.solener.2020.02.010 ↗
22. Influence of bifunctional linker on loading of Cu2AgInS4 QDs onto porous TiO2 NFs to use as an effective photoanode to boost up the photoconversion efficiency of QDSC10.1039/D0NJ01699C ↗
23. The hole transporting behaviour of Cu2AgInS4 and Cu2AgInSe4 for a carbon electrode-based perovskite solar cell10.1039/D0NJ04175K ↗
24. Preparation of compact TiO2 thin film by artist spray gun-assisted pyrolysis method for lead-free perovskite solar cell10.1007/s10854-021-05697-w ↗
25. Application of mesoporous SiO2 layer as an insulating layer in high performance hole transport material free CH3NH3PbI3 perovskite solar cells10.1016/j.jpowsour.2016.04.124 ↗
26. Kesterite Cu2ZnSnS4 as a low-cost inorganic hole-transporting material for high-efficiency perovskite solar cells10.1021/acsami.5b09572 ↗
27. Boosting the efficiency of solution-based CZTSSe solar cells by using supercritical carbon dioxide treatment10.1039/D0GC01355B ↗
28. Effects of S and Se contents on the physical and photovoltaic properties of Cu2ZnSn(SX,Se1-X)4 thin films: achieving a PCE of 9.47%10.1039/C9TA08319G ↗
29. Polarized Raman scattering study of kesterite type Cu2ZnSnS4 single crystals10.1038/srep19414 ↗
30. Towards phase pure CZTS thin films by SILAR method with augmented Zn adsorption for photovoltaic applications10.1007/s40243-019-0152-1 ↗
31. “Green” Aqueous synthesis and advanced spectral characterization nanocrystal Inks10.1038/s41598-018-32004-1 ↗
32. Defect characterisation in Cu2ZnSnSe4 kesterites via resonance Raman spectroscopy and the impact on optoelectronic solar cell properties10.1039/C9TA03625C ↗
33. Electrical transport properties of dip-coated nanocrystalline Cu2ZnSnS4 thin films10.1007/s10854-019-02572-7 ↗
34. Efficient lead-free solar cells based on hollow {en}MASnI3 perovskites10.1021/jacs.7b09018 ↗
35. Open-circuit voltage loss in CH3NH3SnI3 perovskite solar cells10.1246/cl.160994 ↗
36. Photocarrier recombination and injection dynamics in long-term stable lead-free CH3NH3SnI3 perovskite thin films and solar cells10.1021/acs.jpcc.7b06199 ↗
37. Role of tin chloride in tin-eich mixed-halide perovskites applied as mesoscopic solar cells with a carbon counter electrode10.1021/acsenergylett.6b00514 ↗
38. Boosting the efficiency of carbon-based planar CsPbBr3 perovskite solar cells by a modified multistep spin-coating technique and interface engineering10.1016/j.nanoen.2018.11.053 ↗
39. Effect of density of surface defects on photoluminescence properties in MAPbI3 perovskite films10.1039/C8TC05998E ↗
40. An effective TiO2 blocking layer for hole-conductor-free perovskite solar cells based on carbon counter electrode10.1016/j.orgel.2018.04.042 ↗
41. Cu-doped nickel oxide interface layer with nanoscale thickness for efficient and highly stable printable carbon-based perovskite solar cell10.1016/j.solener.2019.02.056 ↗
42. Enhanced photocurrent density of HTM-free perovskite solar cells by carbon quantum dots10.1016/j.apsusc.2017.05.122 ↗
43. A simple one-step hydrothermal synthesis of cobalt nickel selenide/graphene nanohybrid as an advanced platinum free counter electrode for dye sensitized solar cell10.1016/j.electacta.2019.04.142 ↗
44. All-inorganic perovskite solar cells10.1021/jacs.6b10227 ↗
45. Lead-free solid-state organic–inorganic halide perovskite solar cells10.1038/nphoton.2014.82 ↗