journal article·2024-01

Theoretical and experimental analysis for the surface shape evolution of ultrathin workpiece considering the pad surface shape in double-sided polishing

Lei Yang, Xiaoguang Guo, Renke Kang, Xianglong Zhu, Zijun Zhu, Yufan Jia

Publisher page

Abstract

Good surface shape in double-sided polishing for ultrathin workpieces is always difficult to predict due to the complex dynamic contact conditions caused by the pad surface shape, which has often been neglected in previous studies. In this study, based on the Preston equation, a semi-empirical model of workpiece surface evolution considering the pad surface shape was developed. The elastic deformation of the workpiece is calculated based on the elastic mechanics and the finite element method. Furthermore, the winkle elastic foundations model is used to calculate the contact pressure on the workpiece after taking into account the elastic deformation of the ultra-thin workpiece and pad surface shape. Then, the workpiece surface shape and peak-to-valley value are simulated under different parameters. Several sets of experiments were used to determine the Preston coefficient distribution in the model as well as verify the validity of the model. The results show the experiment has good consistency with the simulation, and the maximum error of the model is less than 14. 2 %. This result verifies the correctness and validity of the established model. The polishing process parameters were optimized for better flatness. This work can provide theoretical support for predicting and controlling the flatness of ultrathin workpieces in semiconductor and laser fields.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. High-power solid-state lasers: a laser glass perspective10.1111/j.2041-1294.2011.00044.x ↗
2. Flatness maintenance and roughness reduction of silicon mirror in chemical mechanical polishing process10.1007/s11431-018-9414-6 ↗
3. Study on the double-sided grinding of sapphire substrates with the trajectory method10.1016/j.precisioneng.2017.09.001 ↗
4. Optimization method for double-sided polishing process based on kinematical analysis10.1016/j.procir.2015.12.043 ↗
5. Effects of polishing parameters on surface quality in sapphire double-sided CMP10.1016/j.ceramint.2020.02.116 ↗
6. Reducing edge roll-off during polishing of substrates10.1016/j.precisioneng.2017.07.016 ↗
7. Convergent pad polishing of amorphous silica10.1111/j.2041-1294.2012.00080.x ↗
8. Convergent polishing: a simple, rapid, full aperture polishing process of high quality optical flats & spheres
9. Formation mechanism of concave and convex surface shapes in double-sided lapping10.1016/j.jmatprotec.2022.117749 ↗
10. Precision fabrication of thin copper substrate by double-sided lapping and chemical mechanical polishing10.1016/j.jmapro.2019.05.035 ↗
11. The effect of process vibrations under different rotational rates on the non-uniform material removal during continuous polishing10.1016/j.jmatprotec.2020.116711 ↗
12. Stress-induced deformation of thin copper substrate in double-sided lapping
13. Chemical mechanical polishing: theory and experiment10.1007/s40544-013-0035-x ↗
14. Material removal mechanisms in lapping and polishing10.1016/S0007-8506(07)60207-8 ↗
15. Analysis and modeling of workpieces' kinematic in the process of two-sided face grinding
16. Trajectory uniformity of the double-sided mechanical polishing of SiC single crystal substrate10.1016/j.mssp.2019.104814 ↗
17. Study on surface material removal uniformity in double side grinding based on grain trajectories10.1007/s00170-020-05147-7 ↗
18. Finite element analysis on von Mises stress distributions of Si DSP10.1016/j.mssp.2012.05.005 ↗
19. Modeling and analysis of material removal characteristics in silicon wafer double side polishing10.4028/www.scientific.net/KEM.516.384 ↗
20. Correlation between polishing pad's properties and material removal during full‐aperture polishing10.1111/ijag.13178 ↗
21. On-line measurement of contact pressure and friction force at the workpiece/lap interface during continuous polishing10.1016/j.jmapro.2020.06.003 ↗
22. Toward deterministic material removal and surface figure during fused silica pad polishing10.1111/j.1551-2916.2010.03607.x ↗
23. Estimation of material removal rate distribution in double-sided polishing of thick square workpiece considering workpiece attitude
24. Surface shape development of the pitch lap under the loading of the conditioner in continuous polishing process10.1111/jace.16178 ↗
25. Prediction of surface profile evolution of workpiece and lapping plate in lapping process10.1115/1.4053279 ↗
26. A calculation method for workpiece profile variation during double-sided lapping by considering workpiece elastic deformation10.1016/j.precisioneng.2021.09.016 ↗
27. Effect of kinematic parameters considering workpiece rotation on surface quality in YAG double-sided planetary lapping with the trajectory method10.1007/s00170-022-10288-y ↗
28. Theoretical and experimental analysis of surface topography and surface roughness evolution in fixed abrasive double-sided planetary lapping of YAG wafers10.1007/s00170-023-11417-x ↗
29. A mixed elastohydrodynamic lubrication model with layered elastic theory for simulation of chemical mechanical polishing10.1007/s00170-013-5108-5 ↗
30. A four-node, shear-deformable shell element developed via explicit Kirchho constraints10.1002/1097-0207(20001120)49:8<1065::AID-NME992>3.0.CO;2-5 ↗
31. Mechanism and simulation of removal rate and surface roughness during optical polishing of glasses10.1111/jace.14220 ↗
32. The effect of characteristic of pad on surface form of optical flats in polishing
33. Viscoelastic behavior of polishing pad: effects on edge roll-off during silicon wafer polishing10.1016/j.precisioneng.2019.11.005 ↗
34. Deformation and fracture behaviours of a YAG single crystal characterized using nanoindentation method10.1016/j.matchar.2020.110302 ↗
35. A novel chemical mechanical polishing slurry for yttrium aluminum garnet crystal10.1016/j.apsusc.2019.143601 ↗