journal article·2024-12

Tailored electrostatic attraction force between anionic polymer and Si3N4 film in consecutive gate poly open CMP

Seung-Hoon Choi, Junhwan Yim, Jaehyun Lim, Seji Kim, Youncheol Jeong, Kiho Bae, Jihoon Seo, Kangchun Lee

Publisher page

Abstract

The precise control of chemical mechanical planarization (CMP) process in remove poly Si gate (RPG) module has garnered considerable attention due to its pivotal role in determining the gate height, significantly influencing the overall performance of semiconductor devices. However, the inherent instability in the consecutive CMP processes gives rise to residual defects, thereby exacerbating the degradation of device performance and yield. In this study, we introduce a novel approach to address residual defects during consecutive CMP processes in the RPG module for advanced logic semiconductor integration. The pH conditions in the post-CMP cleaning process following the inter-layer dielectric (ILD) CMP are modulated to attenuate the adsorption affinity of polyacrylic acid (PAA) onto the Si 3N 4 hardmask film. Lowering the pH from 6.0 to 3.0 effectively reduces the electrostatic attraction force between the anionic polymer and Si 3N 4, enhancing the cleaning efficiency of PAA. The proposed process conditions demonstrate improved stability in material removal rates during subsequent multi-selective CMP, as evidenced by optimized trends in end-point detection time in mass production data.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Force Microscopy Techniques and Applications · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Short-channel effects in SOI MOSFETs10.1109/16.19963 ↗
2. Short-channel effects in MOSFETs, integrated nanoelectronics: nanoscale CMOS
3. Improvement in short-channel effects and bias-stress stability of vertical thin-film transistors using atomic-layer-deposited in–Ga–Sn–O channels10.1021/acsaelm.3c01185 ↗
4. A review of gate tunneling current in MOS devices10.1016/j.microrel.2005.12.006 ↗
5. Modeling the polysilicon depletion effect and its impact on submicrometer CMOS circuit performance10.1109/16.381991 ↗
6. Modeling and characterization of quantization, polysilicon depletion, and direct tunneling effects in MOSFETs with ultrathin oxides10.1147/rd.433.0327 ↗
7. Two-dimensional pattern formation using graphoepitaxy of PS-b-PMMA block copolymers for advanced FinFET device and circuit fabrication10.1021/nn501300b ↗
8. Low temperature deposition of high-k/metal gate stacks on high-Sn content (Si) GeSn-alloys10.1021/acsami.6b02425 ↗
9. HKMG CMOS technology qualification: the PBTI reliability challenge10.1016/j.microrel.2014.03.018 ↗
10. High-k/metal gate innovations enabling continued CMOS scaling
11. Innovatively composite hard mask to feature sub-30 nm gate patterning10.1016/j.mee.2014.02.010 ↗
12. High selectivity (SiN/SiO2) etching using an organic solution containing anhydrous HF10.1016/j.mee.2009.03.104 ↗
13. Study of silicon nitride inner spacer formation in process of gate-all-around nano-transistors10.3390/nano10040793 ↗
14. Sub-100 nm silicon-nitride hard-mask for high aspect-ratio silicon fins
15. Fe-substituted silica via lattice dissolution–reprecipitation replacement for tungsten chemical mechanical planarization10.1016/j.jiec.2022.04.001 ↗
16. Metal flake defect and its formation mechanism during replacement metal gate CMP process10.1149/2.0311610jss ↗
17. CMP process control for advanced CMOS device integration10.1149/1.3694367 ↗
18. The role of ammonium citrate and dodecyl pyridinium chloride on chemical mechanical polishing relevant to SiO2 dielectric layer10.1016/j.jmapro.2023.10.054 ↗
19. Post cleaning for FEOL CMP with silica and ceria slurries10.1149/2.0101710jss ↗
20. Chemical mechanical planarization: slurry chemistry, materials, and mechanisms10.1021/cr900170z ↗
21. Atomic-scale surface of fused silica induced by chemical mechanical polishing with controlled size spherical ceria abrasives10.1016/j.jmapro.2022.12.008 ↗
22. Restricted hydrolysis reaction of Si3N4 via nonionic polymer adsorption in advanced shallow trench isolation chemical mechanical planarization10.1016/j.colsurfa.2023.132716 ↗
23. Preparation and characterization of slurry for CMP
24. A review on chemical and mechanical phenomena at the wafer interface during chemical mechanical planarization10.1557/s43578-020-00060-x ↗
25. Communication—reduction of friction force between ceria and SiO2 for low dishing in STI CMP10.1149/2.0241710jss ↗
26. Preparation and characterization of slurry for chemical mechanical planarization (CMP)
27. Challenges and solutions for post-CMP cleaning at device and interconnect levels
28. Minimization of chemical-mechanical planarization (CMP) defects and post-CMP cleaning, journal of vacuum science & technology B: microelectronics and nanometer structures processing
29. Mechanisms of colloidal ceria contamination and cleaning during oxide post CMP cleaning10.1016/j.mee.2021.111544 ↗
30. Development of a novel wet cleaning solution for Post-CMP SiO2 and Si3N4 films10.1016/j.mssp.2021.106353 ↗
31. Almost complete removal of ceria particles down to 10 nm size from silicon dioxide surfaces10.1149/2.0131805jss ↗
32. Particle removal from silicon wafer surface in wet cleaning process10.1109/66.238174 ↗
33. Particle removal by surfactants during semiconductor cleaning
34. Chemically controlled megasonic cleaning of patterned structures using solutions with dissolved gas and surfactant10.1016/j.ultsonch.2021.105859 ↗
35. Effect of organic acids in dilute HF solutions on removal of metal contaminants on silicon wafer10.1016/j.mee.2018.06.012 ↗
36. Coupling supramolecular assemblies and reactive oxygen species (ROS) with megasonic action for applications in shallow trench isolation (STI) post-chemical mechanical planarization (p-CMP) cleaning10.1021/acsomega.2c00683 ↗
37. Developing an efficient forward design method for Co post-CMP cleaning formulations based on nanoparticle removal mechanisms
38. Inhibition of silica nanoparticle adhesion to poly (vinyl alcohol) surfaces by ammonia-mediated hydration: implications for effective post-chemical–mechanical planarization cleaning10.1021/acsanm.0c02308 ↗
39. Non-contact Post-CMP megasonic cleaning of cobalt wafers10.1016/j.mssp.2022.107278 ↗
40. Noncontact megasonics for post-Cu CMP cleaning
41. Post-CMP cleaning using acoustic streaming10.1007/s11664-998-0143-y ↗
42. Post-chemical mechanical planarization cleaning technology10.1149/2162-8777/acfc64 ↗
43. Busnaina · 2002
44. Hybrid DHF and N2 jet spray cleaning for silicon nitride and metal layer DRAM patterns10.1016/j.mee.2019.111171 ↗
45. Post-chemical mechanical polishing cleaning of silicon wafers with laser-induced plasma10.1163/156856104840273 ↗
46. Lee · 2002
47. Constraints on removal of Si3N4 film with conformation-controlled poly (acrylic acid) in shallow-trench isolation chemical–mechanical planarization (STI CMP)10.1557/JMR.2008.0031 ↗
48. Mechanomutable properties of a PAA/PAH polyelectrolyte complex: rate dependence and ionization effects on tunable adhesion strength10.1039/c0sm00095g ↗
49. Direct and quantitative study of ceria–SiO2 interaction depending on Ce3+ concentration for chemical mechanical planarization (CMP) cleaning10.1016/j.mssp.2020.105500 ↗
50. Mechanical characterization of multi-layered lipid nanoparticles using high-resolution AFM force spectroscopy10.1016/j.jiec.2022.06.003 ↗
51. Raman spectral analysis in the C− H stretching region of proteins and amino acids for investigation of hydrophobic interactions10.1021/jf981074l ↗
52. New C− H stretching vibrational spectral features in the Raman spectra of gaseous and liquid ethanol10.1021/jp0675781 ↗
53. IR and Raman investigation of some poly (acrylic) acid gels in aqueous and neutralized state10.12693/APhysPolA.128.128 ↗
54. Effect of neutralization of poly (acrylic acid) on the structure of water examined by Raman spectroscopy10.1021/jp971210+ ↗
55. Infrared, Raman, and near-infrared spectroscopic evidence for the coexistence of various hydrogen-bond forms in poly (acrylic acid)10.1021/ma960693x ↗
56. Adsorption and dissociation of CO on Rh (210)10.1016/0039-6028(91)90554-6 ↗
57. Studies on the structure of the SiOx/SiO2 interface10.1016/0169-4332(92)90352-X ↗
58. Characterization of polyamic acid/polyimide films in the nanometric thickness range from spin‐deposited polyamic acid10.1002/sia.740110803 ↗
59. Endpoint detection for CMP10.1007/s11664-998-0140-1 ↗
60. A signal processing method for the friction-based endpoint detection system of a CMP process10.1088/1674-4926/31/12/126002 ↗
61. A comprehensive review of endpoint detection in chemical mechanical planarisation for deep-submicron integrated circuits manufacturing10.1504/IJMPT.2003.002503 ↗
62. On-line measurement of contact pressure and friction force at the workpiece/lap interface during continuous polishing10.1016/j.jmapro.2020.06.003 ↗