journal article·2024-11

Effect of substrate temperature and position on properties of Cu3N thin films deposited by reactive radio frequency magnetron sputtering

Shanta Majumder, Miho Ohishi, Katsuhiko Saito, Qixin Guo, Md Abdul Majed Patwary, Tooru Tanaka

Publisher page

Abstract

Copper nitride (Cu 3 N) thin films were deposited on soda lime glass (SLG) substrates by reactive radio frequency (RF) magnetron sputtering using a pure Cu target in the presence of argon and nitrogen. The structural, optical, and electrical properties of the Cu 3N films were investigated systematically on substrate temperature and position, demonstrating that both parameters strongly influence the properties of Cu 3 N thin films. XRD patterns revealed the formation of the Cu 3 N phase at all substrate temperatures and positions. The transmittance of the Cu 3 N thin films was over 80 % in the transparent region and the band gap for Cu 3N was determined to 1.7–1.9 eV with a very high absorption coefficient above 10 4 cm −1. The n-type conductivity was observed in every Cu 3N film but the resistivity varied considerably with both substrate temperature and position. The promising physical properties of Cu 3 N thin films suggest their potential application in optoelectronic devices such as thin film solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Copper-based nanomaterials and applications · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Sukhatme · 2017
2. Toward cost-effective solar energy use10.1126/science.1137014 ↗
3. Saw-tooth heat-cycling nitridation of metallic Cu yields first photoactive p-Cu3N for PEC applications10.1021/acsaem.0c01754 ↗
4. High-mobility p-type and n-type copper nitride semiconductors by direct nitriding synthesis and in silico doping design10.1002/adma.201801968 ↗
5. Effect of argon on the properties of copper nitride fabricated by magnetron sputtering for the next generation of solar absorbers10.3390/ma15248973 ↗
6. A new approach for the growth of copper nitrides thin films by thermal evaporation using nitrogen as source gas10.1016/j.ijleo.2021.167666 ↗
7. Evaluation of Cu3N and CuO as negative electrode materials for sodium batteries10.1021/jp509385w ↗
8. Optical and electronic structural properties of Cu3N thin films: a first-principles study (lda + U)10.1021/acsomega.0c04821 ↗
9. Defect tolerant semiconductors for solar energy conversion10.1021/jz5001787 ↗
10. Growth and properties of Cu3N films and Cu3N/γ’-Fe4N bilayers10.1063/1.1459116 ↗
11. Construction of nanorod-shaped TiO2/Cu3N p-n heterojunction for efficient visible-light hydrogen evolution10.1039/D4TC00916A ↗
12. Cu3N thin film synthesized by selective in situ substrate heating during high power impulse magnetron sputtering for augmenting UV photodetection10.1016/j.sna.2022.114137 ↗
13. High performance self-powered UV photodetection by ZnO/Cu3N core-shell nanorod heterostructures via p-n junction form10.1016/j.jallcom.2022.168157 ↗
14. Copper nitride films prepared by reactive radio-frequency magnetron sputtering
15. Effect of substrate temperature on the properties of copper nitride thin films deposited by reactive magnetron sputtering
16. Copper nitride: a versatile semiconductor with great potential for next-generation photovoltaics10.3390/coatings13061094 ↗
17. Effect of nitrogen flow rate on the properties of copper nitride thin films10.1166/jnn.2014.8364 ↗
18. Copper nitride (Cu3N) thin films deposited by RF magnetron sputtering10.1016/j.jcrysgro.2005.10.107 ↗
19. Enhanced electrical properties of copper nitride films deposited via high power impulse magnetron sputtering10.3390/nano12162814 ↗
20. Study of the structure and electrical properties of the copper nitride thin films deposited by pulsed laser deposition10.1016/j.apsusc.2005.10.007 ↗
21. Electronic structure of Cu3N films studied by soft x-ray spectroscopy10.1088/0953-8984/20/23/235212 ↗
22. Influence of sputtering power on the structure, optical and electric properties of Cu3N films10.4028/www.scientific.net/MSF.814.596 ↗
23. Exploring the impact of substrate placement on Cu3N thin films as a solar cell window layer: structural and optical attributes
24. Influences of nitrogen partial pressure on the optical properties of copper nitride films
25. Effects of deposition temperature and working pressure on the thermal and nanomechanical performances of stoichiometric Cu3N: an adaptable material for photovoltaic applications10.3390/nano13222950 ↗
26. Impact of radio frequency plasma power on the structure, crystallinity, dislocation density, and the energy band gap of ZnO nanostructure10.1021/acsomega.1c04105 ↗
27. Investigation of the high mobility IGZO thin films by using Co-sputtering method10.3390/ma8052769 ↗
28. Improved open circuit voltage and photovoltaic properties of ZnTeO-based intermediate band solar cells with n-type ZnS layers10.1109/JPHOTOV.2017.2706419 ↗
29. Molecular beam epitaxial growth of ZnS on a (100)-oriented Si substrate10.1016/0022-0248(87)90368-X ↗
30. Bosco · 2012
31. Stable stoichiometric copper nitride thin films via reactive sputtering10.1007/s00339-022-05726-3 ↗
32. Copper nitride films deposited by dc reactive magnetron sputtering10.1007/s10854-007-9120-0 ↗
33. Multifunctional catalytic activity of Cu3N (001) surface: a first-principles study
34. Effect of substrate temperature on the physical properties of copper nitride films by r.f. reactive sputtering10.1016/S0257-8972(01)01091-X ↗
35. Interband transitions of semiconducting oxides determined from photoelectrolysis spectra10.1016/0038-1098(79)91182-7 ↗
36. Chapter 6 Absorption near the fundamental edge
37. Effect of oxygen flow rate on properties of Cu4O3 thin films fabricated by radio frequency magnetron sputtering10.1063/1.5144205 ↗
38. Electrical conductivity and photoreflectance of nanocrystalline copper nitride thin films deposited at low temperature10.1016/j.jcrysgro.2005.03.077 ↗
39. Influence of oxygen flow rate and substrate positions on properties of Cu-oxide thin films fabricated by radio frequency magnetron sputtering using pure Cu target10.1016/j.tsf.2019.02.026 ↗
40. Copper nitride thin film prepared by reactive radio-frequency magnetron sputtering10.1063/1.2132507 ↗
41. Structure and properties of copper nitride films formed by reactive magnetron sputtering10.1016/S0042-207X(01)00425-0 ↗
42. Structure, optical property and thermal stability of copper nitride films prepared by reactive radio frequency magnetron sputtering10.1016/S1005-0302(11)60082-0 ↗
43. DC triode sputtering deposition and characterization of N-rich copper nitride thin films: role of chemical composition10.1016/j.jcrysgro.2008.07.051 ↗
44. Copper nitride thin films prepared by reactive radio-frequency magnetron sputtering10.1016/S0040-6090(98)01776-3 ↗
45. Preparation and characterization of copper nitride films at various nitrogen contents by reactive radio-frequency magnetron sputtering10.1016/j.matlet.2005.12.028 ↗
46. Improving the thermal stability of Cu3N films by addition of Mn10.1016/j.jmst.2015.07.013 ↗
47. Structural and optical properties of copper nitride thin films in a reactive Ar/N2 magnetron sputtering system10.1051/epjap/2010040 ↗
48. Influence of bias voltage on copper nitride films deposited by reactive sputtering10.1179/026708403225002441 ↗