journal article·2025-02

Improved indium bumps bonding process using flexible composite structure temporary substrate for micro-LED display applications

Xiaowei Huang, Taifu Lang, Xuehuang Tang, Yujie Xie, Xin Lin, Yifan Yang, Shuaishuai Wang, Xiongtu Zhou, Yongai Zhang, Jie Sun, Chang Lin, Qun Yan

Publisher page

Abstract

Micro-LEDs refer to light-emitting diodes with a size of less than 50 μm, which have superior performances compared to Liquid Crystal Displays (LCDs) and Organic Light-Emitting Diodes (OLEDs). Micro-LEDs are expected to constitute the mainstream electronic display technology in the future. Nevertheless, micro-LED technology is still facing some technical difficulties. Especially, in mass transfer technology, the non-parallel problem between the temporary substrate holding the micro-LED chips and the target substrate seriously affects the bonding quality of the micro-LED chips. To solve this problem, this paper proposes a Polydimethylsiloxane (PDMS)-based flexible composite structure temporary substrate (carrier) doped with dimethyl silicone oil, which is capable of generating a deformation of 6 μm under a pressure of 1 MPa and maintaining this property up to 250 °C. Utilizing this deformation property to cope with the non-parallel problem during the bonding process can significantly improve the bonding quality and yield of micro-LEDs. We placed 1600 (40 × 40) micro-LED chips of size 30 μm × 15 μm on the carrier with a chip pitch of 222 μm. The carrier was heat-treated at 250 °C for 2 min as an adhesion reduction method. Under a bonding temperature of 180 °C and a bonding pressure of 0.3 MPa, bonding of the micro-LEDs with a 1.98-inch thin film transistor (TFT) was implemented using the carriers. A micro-LED green display with a PPI of 114 was successfully fabricated, with a display yield of 95.18 % and a brightness of 18,710 cd/m 2. The method developed in this paper can overcome the key challenges of micro-LEDs mass transfer technology and pave the way for the industrialization of micro-LEDs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D IC and TSV technologies · Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Recent progress in micro-LED-based display technologies10.1002/lpor.202100427 ↗
2. Monolithic integration of GaN-based transistors and micro-LED10.3390/nano14060511 ↗
3. Micro-LEDs, a manufacturability perspective10.3390/app9061206 ↗
4. Mini-LED, Micro-LED and OLED displays: present status and future perspectives10.1038/s41377-020-0341-9 ↗
5. Full-color realization of micro-LED displays10.3390/nano10122482 ↗
6. Micro-light emitting diode: from chips to applications10.1002/lpor.202000133 ↗
7. Challenges of high-yield manufacture in micro-light-emitting diodes displays: chip fabrication, mass transfer, and detection10.1088/1361-6463/ad6ce3 ↗
8. Micro-LED display: recent progress and future challenges10.37188/CJLCD.2021-0063 ↗
9. Recent progress of laser processing technology in micro-LED display manufacturing: a review
10. Mass transfer, detection and repair technologies in micro-LED displays10.1007/s40843-022-2110-2 ↗
11. Research status of key technologies and equipment for mini/micro LED mass transfer
12. The adhesive force measurement between single μLED and substrate based on atomic force microscope10.3390/app12199480 ↗
13. Characteristics and techniques of GaN-based micro-LEDs for application in next-generation display10.1088/1674-4926/41/4/041606 ↗
14. Control of adhesion force for micro LED transfer using a magnetorheological elastomer10.1007/s12206-019-1024-4 ↗
15. Li · 2023 · 315
16. PixelEngine all-in-one: a printable pixel-driver MicroIC with three-dimensionally integrated red, green, and blue MicroLEDs
17. A preliminary study of PDMS stamp towards flexography printing technique: an overview
18. Growth, transfer printing and colour conversion techniques towards full-colour micro-LED display10.1016/j.pquantelec.2020.100263 ↗
19. Li · 2020
20. Simultaneous transfer and bonding (SITRAB) process for micro-LEDs using laser-assisted bonding with compression (LABC) process and SITRAB adhesive
21. High resolution micro-LED arrays using Au-Sn flip-chip bonding10.1109/TED.2023.3268628 ↗
22. Influences of bonding process parameters on mechanical properties of the Micro-LED device
23. Integration technology of micro-LED for next-generation display10.34133/research.0047 ↗
24. The compatibility of three silicone oils with polydimethylsiloxane and the microstructure and properties of their composite coatings10.3390/polym13142355 ↗
25. Polydimethylsiloxane composites characterization and its applications: a review10.3390/polym13234258 ↗
26. Active matrix monolithic micro-LED full-color micro-display10.1002/jsid.962 ↗
27. Demonstration of programmable light intensity of a micro-LED with a Hf-based ferroelectric ITZO TFT for Mura-free displays10.1039/D2NA00713D ↗
28. Research on characteristics matching of micro-LED devices10.3390/electronics13173369 ↗
29. Network formation and thermal stability enhancement in evolutionary crosslinked PDMS elastomers with sol-gel-formed silica nanoparticles: comparativeness between as-received and pre-hydrolyzed TEOS10.1016/j.porgcoat.2017.08.012 ↗
30. The viscosity of dimethyl silicone oil and the concentration of absorbed air10.1002/aic.12535 ↗
31. Competing fracture in kinetically controlled transfer printing10.1021/la701555n ↗
32. Controllable construction of cross-linking network for regulating on the mechanical properties of polydimethylsiloxane and polydimethylsiloxane/carbon nanotubes composites10.1002/app.52113 ↗