Study of electronic, mechanical, optical, and thermoelectric properties of stable double perovskites Cs2K(Ga/In)I6 for solar cells renewable energy
Source abstract
Abstract
Double perovskites are exceptional materials for thermoelectric and optoelectronic applications in pursuing green energy. In this study, a comprehensive analysis of Cs 2K(Ga/In)I 6 has been conducted, focusing on its mechanical, electronic, optical, and thermoelectric properties by using wien2k, BoltzTraP, ShengBTE, and Phonopy codes. The stability of these compounds has been ensured by considering the tolerance factor, formation energy, phonon spectra, and elastic constants. The elastic and thermophysical properties, including ductility, anisotropy, Debye temperature, and melting temperature, are reported to be noteworthy. The band gaps of Cs 2K(Ga/In)I 6, measured to be 1.92 and 2.08 eV, indicate the presence of absorption bands in both the visible and ultraviolet regions. Significant absorbance, polarization, low optical reflectivity, and energy loss have been discussed in relation to photovoltaic applications. In addition, the transport characteristics are examined by analyzing the Seebeck coefficient and thermal and electrical conductivities. Due to their high figure of merit and exceptionally low lattice thermal conductivity at room temperature, these materials are highly recommended for thermoelectric generators.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Solid-state spectroscopy and crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Choi. Fossil fuels are harming our brains: identifying key messages about the health effects of air pollution from fossil fuels10.1186/s12889-019-7373-1 ↗
2. Lead-free double perovskites for perovskite solar cells10.1002/solr.201900306 ↗
3. Powering the planet: chemical challenges in solar energy utilization10.1073/pnas.0603395103 ↗
4. Tailoring electronic and optical parameters of bilayer graphene through, Boron and nitrogen atom co-substitution; an ab-initio study10.1016/j.apsusc.2019.02.240 ↗
5. Manipulation of inherent characteristics of graphene through N and mg atom co-doping; a DFT study10.1016/j.physleta.2018.02.027 ↗
6. First principle study of lead-free double perovskites halides Rb2Pd(Cl/Br)6 for solar cells and renewable energy devices: a quantum DFT10.1002/er.6778 ↗
7. Manipulation of inherent characteristics of graphene through N and mg atom co-doping; a DFT study10.1016/j.physleta.2018.02.027 ↗
8. Colloidally prepared La doped BaSnO3 electrodes for efficient, photostable perovskite solar cells10.1126/science.aam6620 ↗
9. https://www.nrel.gov/pv/assets/images/efficiency-chart.png%20(accessed%2020/June/2018).
10. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
11. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance10.1126/science.aah5557 ↗
12. Recent progress in lead-free perovskite (-like) solar cell Mater10.1016/j.energy.2018.04.095 ↗
13. G. de Miguel Alternative perovskites for photovoltaics
14. Y. Y. Searching for promising new perovskite-based photovoltaic absorbers: the importance of electronic dimensionality10.1039/C6MH00519E ↗
15. A bismuth-halide double perovskite with long carrier recombination lifetime for photovoltaic applications10.1021/jacs.5b13294 ↗
16. Lead-free halide double perovskites via heterovalent substitution of noble metals10.1021/acs.jpclett.6b00376 ↗
17. A bismuth-halide double perovskite with long carrier recombination lifetime for photovoltaic applications10.1021/jacs.5b13294 ↗
18. Defect-induced band-edge reconstruction of a bismuth-halide double perovskite for visible-light absorption10.1021/jacs.7b01629 ↗
19. Review on recent progress of lead-free halide perovskites in optoelectronic applications10.1016/j.nanoen.2020.105526 ↗
20. Alternative perovskites for photovoltaics10.1002/aenm.201703120 ↗
21. Mehmood · Mater. Sci. Eng. B · 2021 · 266
22. Exploring the properties of lead-free hybrid double perovskites using a combined computational experimental approach10.1039/C6TA05817E ↗
23. Halide perovskite-derived compounds Rb2TeX6 (X = Cl, Br, and I): electronic structure of the ground and first excited states10.1021/acs.inorgchem.9b00250 ↗
24. Defect tolerance to intolerance in the vacancy-ordered double perovskites semiconductors Cs2SnI6 and Cs2TeI610.1021/jacs.6b03207 ↗
25. Computational study of halide perovskite-derived A2BX6 inorganic compounds: chemical trends in electronic structure and structural stability10.1021/acs.chemmater.7b02013 ↗
26. The role of Goldschmidt's tolerance factor in the formation of A2BX6 double halide perovskites and its optimal range
27. First-principles investigation of halide-based Rb2NaGaZ6 (Z= Br, I) double perovskites for energy harvesting applications10.1039/D3RA05060B ↗
28. Theoretical investigations of optoelectronic and transport properties of Rb2YInX6 (X = Cl, Br, I) double perovskite materials for solar cell applications10.1016/j.solener.2021.11.076 ↗
29. Exploring the structural, mechanical, electronic, and optical properties of double perovskites of Cs2AgInX6 (X = Cl, Br, I) by first-principles calculations10.1016/j.jssc.2022.123025 ↗
30. Ab-initio simulations of Li-based Double Perovksites A2LiInBr6 (A = Rb, Cs) for solar cell applications10.1016/j.cplett.2022.139612 ↗
31. New lead-free double perovskites A2NaInI6 (A = Cs, Rb) for solar cells and renewable energy; first principles analysis
32. Exploring structural, thermodynamic, elastic, electro-optic, and thermoelectric characteristics of double perovskites Rb2XInBr6 (X= Na, K) for photovoltaic applications: a DFT approach10.1016/j.solener.2023.112131 ↗
33. Optoelectronic performance of perovskite Cs 2 KMI 6 (M= Ga, In) based on high-throughput screening and first-principles calculations10.1039/D3CP00732D ↗
34. Blaha · 2001
35. Electronic structure calculations of solids using the WIEN2k package for material sciences10.1016/S0010-4655(02)00206-0 ↗
36. Improving the efficiency of FP-LAPW calculations10.1016/S0010-4655(99)00495-6 ↗
37. Restoring the density-gradient expansion for exchange in solids and surfaces10.1103/PhysRevLett.100.136406 ↗
38. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
39. Accurate band gaps of semiconductors and insulators with a semi-local exchange-correlation potential10.1103/PhysRevLett.102.226401 ↗
40. BoltzTraP. A code for calculating band-structure dependent quantities10.1016/j.cpc.2006.03.007 ↗
41. Calculation of Debye temperature for crystalline structures—a case study on Ti, Zr, and Hf10.1016/S1359-6454(01)00002-7 ↗
42. Elastic constant versus melting temperature in metals10.1016/0036-9748(84)90267-9 ↗
43. Influence of alloying elements on the mechanical and thermodynamic properties of ZrB2 boride10.1016/j.vacuum.2022.110898 ↗
44. Half-metallic quaternary CrYCoX (X= Si, Ge, Sn, Pb) alloys: DFT calculations and Monte Carlo simulation
45. Comparative DFT-based investigation of physical properties of Cs2MBiBr6 (M= Ag, Cu, and Au) Perovskites: sustainable materials for renewable energy10.1016/j.cocom.2024.e00885 ↗
46. Band gap engineering in lead free halide cubic perovskites GaGeX 3 (X= Cl, Br, and I) based on first-principles calculations10.1039/D4RA00224E ↗
47. A DFT study of the structural, elastic, electronic and magnetic properties of new quaternary compounds TiHfOsX (Al, Ga, In)10.1016/j.physleta.2020.126793 ↗
48. Charting the complete elastic properties of inorganic crystalline compounds10.1038/sdata.2015.9 ↗
49. Necessary and sufficient elastic stability conditions in various crystal systems10.1103/PhysRevB.90.224104 ↗
50. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
51. Microcracking in ceramics induced by thermal expansion or elastic anisotropy10.1111/j.1151-2916.1988.tb05022.x ↗
52. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
53. Energy levels of Eu 2+ states in the next-generation LED-phosphor SrLi 2 Al 2 O 2 N 2: Eu 2+10.1039/D2TC01372J ↗
54. Optoelectronic performance of perovskite Cs 2 KMI 6 (M= Ga, In) based on high-throughput screening and first-principles calculations10.1039/D3CP00732D ↗
55. Improving the efficiency of a new perovskite solar cell based on Sr3SbI3 by optimizing the hole transport layer10.1021/acs.energyfuels.3c04099 ↗
56. First-principles study of halide double perovskite Cs2SnX6 (X= Cl, Br, I) for solar cell applications10.1142/S0217984923502238 ↗
57. Patterson · 2018 · 649
58. Optical properties of solids
59. Thermal properties of high-entropy RE-disilicates controlled by high throughput composition design and optimization10.1016/j.matdes.2023.112485 ↗
60. Extraordinary role of Zn in enhancing thermoelectric performance of Ga-doped n-type PbTe10.1039/D1EE02986J ↗
61. Materials Challenges for aluminum ion based aqueous energy storage devices: progress and prospects
62. Structural, morphological, elastic, optoelectronic and thermoelectric properties of lead-free double perovskite Na2AgBiBr6 for photovoltaic applications: experimental and DFT insight10.1016/j.ceramint.2024.02.002 ↗
63. Large thermoelectric performance of heavily Nb-doped SrTiO3 epitaxial film at high temperature10.1063/1.2035889 ↗
64. High-efficient thermoelectric materials: the case of orthorhombic IV-VI compounds10.1038/srep09567 ↗
65. Structural, elastic, optoelectronic, and transport properties of Na-based halide double perovskites Na2CuMX6 (M= Sb, Bi, and X= Cl, Br) as renewable energy materials: a DFT insight10.1557/s43578-023-01181-9 ↗
66. Effect of position occupancy of different elements on the structural stability, optoelectronic, thermoelectric and elastic properties of Cs2CuAsX6 (X: Cl, Br, I) halide double perovskite: DFT analysis10.1016/j.mssp.2024.108187 ↗
67. First principles insight on mechanical stability, optical and thermoelectric response of novel lead-free Rb2ScCuBr6 and Cs2ScCuBr6 double perovskites10.1016/j.mssp.2023.107910 ↗
68. Investigating the novel thermoelectric properties of magnesium, calcium, and barium divanadate oxides (XV2O6 where X= Mg, Ca, and Ba) for waste heat recovery applications in energy harvesting devices10.1007/s00339-023-07235-3 ↗
69. Evaluation of physical properties of A2ScCuCl6 (A= K, Rb, and Cs) double perovskites via DFT framework
70. An analytic study of the Wiedemann–Franz law and the thermoelectric figure of merit
71. DFT exploration of elastic, optoelectronic, and thermoelectric properties of stable and eco-friendly double perovskites Cs2YAuX6 (X= Cl, Br) for green energy applications10.1016/j.jpcs.2024.111936 ↗
72. Systematic study of optoelectronic and thermoelectric properties of new lead-free halide double perovskites A2KGaI6 (A= Cs, Rb) for solar cell applications via ab-initio calculations