journal article·2025-02

Pr3+ ions activated TiO2 nanoparticles as electron transport layer for copper based (CH3NH2)2CuBr4 perovskites solar cells

R. Vishwanath, R. Ranjith, K. Munirathnam, J. Shim, P.C. Nagajyothi, Sabah Ansar, V. Manjunath

Publisher page

Abstract

In emerging organic-inorganic perovskite solar cells (PSCs), the role of efficient electron transport layers (ETLs) is critical for electron transfer and hole blocking. TiO 2 is one of the widely reported ETLs but limits the performance of the devices exhibiting restricted electron mobility and numerous defect states. The process of doping rare earth ions has been an effective approach in improving the electronic and optical properties of TiO 2 for enhanced efficiency of PSCs. The present work studies the effect of praseodymium (Pr 3+) doped TiO 2 prepared via sol-gel technique as electron transport layers for lead-free perovskite solar cells. The X-ray diffraction (XRD) and diffuse reflectance spectroscopy (DRS) studies showed that the crystallite size and bandgap of the particles reduced as a function of Pr 3+ doping concentration. The X-ray photoelectron spectroscopy (XPS) analysis of the samples inferred that Pr 3+ ions majorly remained on the TiO 2 surface. Copper-based (CH 3NH 2) 2CuBr 4 perovskites were synthesized by solution method as an active layer for the solar cells. XRD, FTIR (Fourier Transform Infrared Spectroscopy) and XPS analysis confirmed the formation of 2D-perovskite phase of the samples. The scanning electron microscopy (SEM) analysis of the perovskites revealed well crystalline orthorhombic structures. Current-voltage measurements were carried out to study better passivation properties with rare-earth doping of the ETLs and was found to be most enhanced for 0.07 Pr 3+ concentration. Electro-chemical Impedance Spectroscopy (EIS) studies of the solar cells showed a reduced interface recombination and enhance charge transfer properties as a function of rare-earth dopant concentration. Further, the fabricated perovskite solar cells showcased better performance with xPr 3+:TiO 2 ETLs and the maximum efficiency of ∼1.25 % was obtained for TiO 2: 0.07 Pr 3+.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
2. Metal-doped lead halide perovskites: synthesis, properties, and optoelectronic applications10.1021/acs.chemmater.8b02989 ↗
3. High-efficiency two-dimensional ruddlesden-popper perovskite solar cells10.1038/nature18306 ↗
4. The rapid evolution of highly efficient perovskite solar cells10.1039/C6EE03397K ↗
5. Bulk in situ reconstruction of heterojunction perovskite enabling stable solar cells over 24% efficiency10.1002/adfm.202310133 ↗
6. Mesoscopic CH 3NH 3PbI 3/TiO 2 heterojunction solar cells10.1021/ja307789s ↗
7. Aging-resistant precursor with ultrawide annealing window for 24.08% perovskite solar cells10.1002/aenm.202302769 ↗
8. Perovskite solar cells with self-disintegrating seeds deliver an 83.64 % fill factor10.1016/j.nanoen.2024.109751 ↗
9. Bio-inspired graphitic carbon-based large-area (10 × 10 cm2) perovskite solar cells: stability assessments under indoor, outdoor, and water-soaked conditions10.1021/acsami.2c02463 ↗
10. Perovskites for next-generation optical sources10.1021/acs.chemrev.9b00107 ↗
11. Crystal structures of three new copper(II) halide layered perovskites: structural, crystallographic, and magnetic correlations10.1021/ja00234a010 ↗
12. Copper-substituted lead perovskite materials constructed with different halides for working (CH3NH3)2CuX4-based perovskite solar cells from experimental and theoretical view10.1021/acsami.8b00495 ↗
13. Lead-free MA2CuClxBr4-x hybrid perovskites10.1021/acs.inorgchem.5b01896 ↗
14. Layered organic-inorganic hybrid perovskites: structure, optical properties, film preparation, patterning and templating engineering10.1039/c001929a ↗
15. (C6H5CH2NH3)2CuBr4: a lead-free, highly stable two-dimensional perovskite for solar cell applications10.1021/acsaem.8b00372 ↗
16. A copper-based 2D hybrid perovskite solar absorber as a potential eco-friendly alternative to lead halide perovskites10.1039/D1TC05047H ↗
17. Solution-processed flexible planar perovskite solar cells: a strategy to enhance efficiency by controlling the ZnO electron transfer layer, PbI2 phase, and CH3NH3PbI3 morphologies10.1016/j.jpowsour.2016.05.026 ↗
18. Lowerature SnO2-based electron selective contact for efficient and stable perovskite solar cells10.1039/C5TA01207D ↗
19. An internally photoemitted hot carrier solar cell based on organic-inorganic perovskite10.1016/j.nanoen.2019.104383 ↗
20. Sacrificial hydrogen generation from formaldehyde with Pt/TiO2 photocatalyst in solar radiation10.1021/ie3029976 ↗
21. Journal of Colloid and Interface Science Efficient rare earth co-doped TiO 2 electron transport layer for high-performance perovskite solar cells10.1016/j.jcis.2019.06.003 ↗
22. Mn doped and undoped ZnO films: a comparative structural, optical and electrical properties study10.1016/j.matchemphys.2005.07.045 ↗
23. Influence of Pr3+ doping on the synthesis of colloidal sols and nanoparticulate TiO2 xerogels and their photocatalytic activity10.1016/j.matchar.2021.111536 ↗
24. Tuning the Fermi-level of TiO2 mesoporous layer by lanthanum doping towards efficient perovskite solar cells10.1039/C6NR05917A ↗
25. High-performance perovskite solar cells with a weak covalent TiO2:Eu3+ mesoporous structure10.1021/acsaem.7b00008 ↗
26. Perovskite sensitized erbium doped TiO2 photoanode solar cells with enhanced photovoltaic performance10.1016/j.optmat.2019.05.039 ↗
27. A single-phase white light emitting Pr3+ doped Ba2CaWO6 phosphor: synthesis, photoluminescence and optical properties10.1016/j.optmat.2018.02.003 ↗
28. Density functional theory investigation of Pr adsorption on the anatase TiO2(101) surface for photovoltaic applications10.1016/j.apsusc.2022.156042 ↗
29. Pr-doped inorganic SrCeO3 perovskite nanophosphors as activated compact layers for (CH3NH3)2CuBr4 perovskite solar cells10.1021/acsaom.3c00448 ↗
30. Imaging consecutive steps of O2 reaction with hydroxylated TiO2(110): identification of HO2 and terminal OH intermediates10.1021/jp807030n ↗
31. The role of interstitial sites in the Ti3d defect state in the band gap of titania10.1126/science.1159846 ↗
32. Synthesis and characterization of undoped and cobalt-doped TiO2 nanoparticles via sol–gel technique10.1007/s13204-014-0337-y ↗
33. Performance and application of far infrared rays emitted from rare Earth mineral composite materials10.1166/jnn.2008.18172 ↗
34. Photocatalytic activity of Pr - modified - TiO 2 for the degradation of bisphenol A10.1007/s42452-021-04284-2 ↗
35. V Light
36. Synthesis, characterization and degradation of Bisphenol A using Pr, N co-doped TiO 2 with highly visible light activity10.1016/j.apsusc.2011.05.074 ↗
37. Fengping · 2014 · 35 · 2512
38. In situ growth of 2D perovskite capping layer for stable and efficient perovskite solar cells
39. Improved 3D-2D perovskite for efficient perovskite photovoltaics with low-temperature carbon electrodes10.1021/acsomega.3c06322 ↗
40. Yi
41. Karikalan
42. A review on conduction mechanisms in dielectric films10.1155/2014/578168 ↗
43. Defect passivation and crystallization control of perovskite films for photovoltaic application10.1016/j.mtnano.2021.100118 ↗
44. Defect passivation strategies in perovskites for an enhanced photovoltaic performance10.1039/D0EE01767A ↗
45. Charge carrier trapping at surface defects of perovskite solar cell absorbers: a first-principles study10.1021/acs.jpclett.7b00055 ↗
46. Rare earth element-doped SnO2 for enhancing the efficiency and stability of Cs2AgBiBr6 lead-free perovskite solar cells10.1016/j.jlumin.2023.120144 ↗
47. Performance and stability enhancement of dye-sensitized and perovskite solar cells by Al doping of TiO210.1002/adfm.201401658 ↗
48. Efficient rare earth co-doped TiO2 electron transport layer for high-performance perovskite solar cells10.1016/j.jcis.2019.06.003 ↗
49. Amorphous inorganic electron-selective layers for efficient perovskite solar cells: feasible strategy towards room-temperature fabrication10.1002/adma.201505241 ↗
50. Highly efficient LiYF4:Yb3+, Er3+ upconversion single crystal under solar cell spectrum excitation and photovoltaic application10.1021/acsami.5b12528 ↗
51. G.L. Colpani, M. Zanetti, R.C.F. Zeferino, L.L. Silva, J.M.M. de Mello, H.G. Riella, N. Padoin, M.A.F. and C. Soares, Lanthanides Effects on TiO2 Photocatalysts, in: S.B. Khan, K. Akhtar (Eds.), IntechOpen, Rijeka, 2018: p. Ch. 5. https://doi.org/10.5772/intechopen.80906.10.5772/intechopen.80906 ↗
52. 9 - rare earth–doped TiO2 nanoparticles for photocatalytic dye remediation
53. The electronic structure and optical properties of anatase TiO₂ with rare earth metal dopants from first-principles calculations10.3390/ma11020179 ↗
54. Origin and alleviation of J-V hysteresis in perovskite solar cells : a short review10.1016/j.cattod.2020.12.025 ↗
55. Ligand orientation-induced lattice robustness for highly efficient and stable tin-based perovskite solar cells10.1021/acsenergylett.0c00960 ↗
56. Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth10.1016/j.jechem.2020.06.044 ↗
57. Enhanced efficiency and stability in Sn-based perovskite solar cells by trimethylsilyl halide surface passivation10.1016/j.jechem.2022.03.028 ↗
58. Efficient tin-based perovskite solar cells with trans-isomeric fulleropyrrolidine additives10.1038/s41566-024-01381-7 ↗
59. Role of a hydrophobic scaffold in controlling the crystallization of methylammonium antimony iodide for efficient lead-free perovskite solar cells10.1016/j.nanoen.2017.12.051 ↗
60. Chlorine-incorporation-induced formation of the layered phase for antimony-based lead-free perovskite solar cells10.1021/jacs.7b10739 ↗
61. Strain-induced band-edge modulation in lead-free antimony-based double perovskite for visible-light absorption10.1021/acsaem.1c03598 ↗
62. Two-Dimensional Cs(3)Sb(2)I(9-x)Cl(x) film with (201) preferred orientation for efficient perovskite solar cells
63. Band gap tuning of perovskite solar cells for enhancing the efficiency and stability: issues and prospects10.1039/D4RA01640H ↗
64. Lead-free, air-stable ultrathin Cs3Bi2I9 perovskite nanosheets for solar cells10.1016/j.solmat.2018.04.032 ↗
65. Tailoring the film morphology and interface band offset of caesium bismuth iodide based Pb free perovskite solar cells10.1039/C9TC02181G ↗
66. Bulk heterojunction gifts bismuth-based lead-free perovskite solar cells with record efficiency10.1016/j.nanoen.2019.104362 ↗
67. Elpasolite structures based on A2AgBiX6 (A: MA, Cs, X: I, Br): application in double perovskite solar cells10.1016/j.mssp.2020.105639 ↗
68. S.T. Jayawardane, M.D. Akmal, Y.H. Jayaneththi, T. V Fernando, D. Hu, P.K.W. Abeygunawardhana, G.A. Sewvandi, Simulation-Based Performance Analysis of Lead-Free Bismuth Perovskite Solar Cells: A Comparative Study of Cs3Bi2I9 and (CH3NH3)3Bi2I9 -based Perovskite Solar Cells, Advanced Theory and Simulations. 7 (2024) 2400206. https://doi.org/https://doi.org/10.1002/adts.202400206.10.1002/adts.202400206 ↗
69. One-step synthesis of lead-free and hole transport layer-free methylammonium bismuth chloride ((CH3NH3)3Bi2ICl9−)-based perovskite solar cells10.1002/ente.202301453 ↗
70. Enhanced performance of germanium halide perovskite solar cells through compositional engineering10.1021/acsaem.8b00007 ↗
71. Highly stable and efficient all-inorganic lead-free perovskite solar cells with native-oxide passivation10.1038/s41467-018-07951-y ↗
72. Performance evaluation and material parameter perspective of eco-friendly highly efficient CsSnGeI3 perovskite solar cell10.1016/j.spmi.2019.106273 ↗
73. Cupric bromide hybrid perovskite heterojunction solar cells10.1016/j.synthmet.2015.07.013 ↗