Enhanced electromagnetic wave absorption of La0.8Ca0.2Fe1-xMnxO3 boosted by lattice distortion and double-exchange
Source abstract
Abstract
Perovskite LaFeO 3 with ABO 3 structure is regarded as a potential candidate in electromagnetic wave absorption, considering its unique dielectric-magnetic coupling loss mechanism. However, the limited attenuation ability of pristine LaFeO 3 restricts its further application. In this work, the dual doping strategy is carried out to improve the dielectric and magnetic loss capacity. Ca and Mn dual doped La 0.8Ca 0.2Fe 1-xMn xO 3 are prepared by spray pyrolysis method. The minimum reflection loss (RL min) of La 0.8Ca 0.2Fe 0.2Mn 0.8O 3 reaches −52.3 dB with an effective absorption bandwidth (EAB) of 3.92 GHz at the fitting thickness of 2.08 mm. The enhancement of the dielectric loss mainly originates from strengthened dipole polarization induced by the Jahn-Teller distortion which is caused by Ca and Mn double doping. The magnetic loss can be attributed to the improvement of double-exchange between Fe 3+ –O 2- -Mn 3+ and Mn 3+ –O 2- -Mn 4+ owing to the introduction of Mn. This work provides new insights into regulating the electromagnetic wave absorption performance of perovskite.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Multiferroics and related materials · Magnetic and transport properties of perovskites and related materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. A review on electromagnetic microwave absorption properties: their materials and performance10.1016/j.jmrt.2022.07.140 ↗
2. Structural Design strategies of polymer matrix composites for electromagnetic interference shielding: a review10.1007/s40820-021-00707-2 ↗
3. Sandwich structure electromagnetic interference shielding composites based on Fe3O4 nanoparticles/PANI/laser-induced graphene with near-zero electromagnetic waves transmission10.1016/j.apsusc.2023.157975 ↗
4. A review on the susceptor assisted microwave processing of materials10.1016/j.energy.2015.11.034 ↗
5. Recent advances of carbon-based electromagnetic wave absorption materials facing the actual situations10.1016/j.carbon.2023.04.002 ↗
6. Recent progress on electromagnetic wave absorption materials enabled by electrospun carbon nanofibers10.1016/j.carbon.2023.118300 ↗
7. Advances and mechanisms in polymer composites toward thermal conduction and electromagnetic wave absorption10.1016/j.scib.2023.04.036 ↗
8. Recent advancements in the electromagnetic interference shielding performance of nanostructured materials and their nanocomposites: a review10.1039/D1TA09522F ↗
9. Two-dimensional nanomaterials for high-efficiency electromagnetic wave absorption: an overview of recent advances and prospects10.1016/j.jallcom.2021.162343 ↗
10. Micro-selection and macro-orientation strategy enables high-areal-capacity magnesium metal anode10.1021/acsenergylett.3c02309 ↗
11. Unraveling the atomic-level manipulation mechanism of tin-based ternary anodes via hetero-anion engineering for stable sodium ion storage10.1016/j.compositesb.2023.111109 ↗
12. Advanced nano-bifunctional electrocatalysts in Li–air batteries for high coulombic efficiency10.1039/D3GC02151C ↗
13. Enhanced microwave absorption properties by tuning cation deficiency of perovskite oxides of two-dimensional LaFeO3/C composite in X-band10.1021/acsami.6b15379 ↗
14. Influence of synergistic effect of Mn valence state and oxygen vacancy concentration on microwave absorbing properties of CaMnO310.1016/j.ceramint.2021.12.191 ↗
15. Effects of Gd doping on microwave absorption properties and mechanism for CaMnO3 perovskites10.1016/j.ceramint.2023.04.183 ↗
16. Laminated microwave absorbers of A-site cation deficiency perovskite La0.8FeO3 doped at hybrid RGO carbon10.1016/j.compositesb.2019.107246 ↗
17. Facile synthesis of hierarchical A-site cation deficiency perovskite LaxFeO3-y/RGO for high efficiency microwave absorption10.1016/j.coco.2020.04.010 ↗
18. Fast and efficient synthesis of a new adjustable perovskite-structured ferrite La1−xCaxFeO3 microwave absorbent10.1016/j.jallcom.2021.162167 ↗
19. Structure, magnetic properties and microwave absorption properties of NdFe1-xNixO310.1016/j.ceramint.2021.09.150 ↗
20. Two-dimensional multiferroics with intrinsic magnetoelectric coupling in a-site ordered perovskite monolayers10.1021/acs.nanolett.2c03457 ↗
21. Magnetism manipulated by ferroelectric polarization and epitaxial strain in a La0.75Sr0.25MnO3/BaTiO3 system10.1039/D0CP05961G ↗
22. Resistive switching and multiferroic behavior of La0.5Pr0.5FeO3 ferrite thin films10.1016/j.jallcom.2020.156936 ↗
23. Microstructure and ferroelectric properties of high-entropy perovskite oxides with A-site disorder10.1016/j.ceramint.2021.08.204 ↗
24. Co-substitution tailored dielectric relaxation and electrical conduction in lanthanum orthoferrite10.1016/j.ceramint.2020.06.042 ↗
25. Particle dispersion and lattice distortion induced magnetic behavior of La1-xSrxMnO3 perovskite nanoparticles grown by salt-assisted solid-state synthesis10.1016/j.matchemphys.2020.122834 ↗
26. Tunable exchange bias in La1.5Sr0.5CoMnO6 double perovskite doped with nonmagnetic Ga ions10.1016/j.cap.2021.12.011 ↗
27. Chemical growth and study of low intensity sensing ability of nanobranch and nanorod structured SnO2 UV detector10.1016/j.jece.2021.106981 ↗
28. Growth of SnO2 nanowire arrays by ultrasonic spray pyrolysis and their gas sensing performance10.1039/C4RA05682E ↗
29. High coercivity α-Fe2O3 nanoparticles prepared by continuous spray pyrolysis10.1039/C5RA06261F ↗
30. Solving crystal structures with GSAS-II10.1107/S2053273316099861 ↗
31. ıt GSAS-II: the genesis of a modern open-source all purpose crystallography software package10.1107/S0021889813003531 ↗
32. Cobalt doping of bismuth ferrite for matched dielectric and magnetic loss10.1063/1.5134741 ↗
33. Achieving self-powered photoresponse in mono layered SnO2 nanostructure array UV photodetector through the tailoring of electrode configuration10.1016/j.jphotochem.2022.113860 ↗
34. R factors in Rietveld analysis: how good is good enough?10.1154/1.2179804 ↗
35. High entropy La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 with tailored eg occupancy and transition metal-oxygen bond properties for oxygen reduction reaction10.1016/j.jmst.2023.12.077 ↗
36. S. Chen, G. Chen, Y. Zhao, S. Bu, Z. Hu, B. Mao, H. Wu, J. Liao, F. Li, C. Zhou, B. Guo, W. Liu, Y. Zhu, Q. Lu, J. Hu, M. Shang, Z. Shi, B. Yu, X. Zhang, Z. Zhao, K. Jia, Y. Zhang, P. Sun, Z. Liu, L. Lin, X. Wang, Tunable Adhesion for All-Dry Transfer of 2D Materials Enabled by the Freezing of Transfer Medium, Adv. Mater. (n.d.) 2308950. https://doi.org/10.1002/adma.202308950.10.1002/adma.202308950 ↗
37. Engineering phosphorus-doped LaFeO3-δ perovskite oxide as robust bifunctional oxygen electrocatalysts in alkaline solutions10.1016/j.nanoen.2018.02.051 ↗
38. Surface reconstruction in amorphous CoFe-based hydroxides/crystalline phosphide heterostructure for accelerated saline water electrolysis10.1016/j.jcis.2024.01.024 ↗
39. Epitaxial growth of LaFeO3 thin films by RF magnetron sputtering10.1016/j.jcrysgro.2003.12.007 ↗
40. Degradation of bisphenol A by peroxymonosulfate catalytically activated with Mn1.8Fe1.2O4 nanospheres: synergism between Mn and Fe10.1021/acs.est.7b03007 ↗
41. Recent advances of lanthanum-based perovskite oxides for catalysis10.1021/acscatal.5b01667 ↗
42. Probability of double exchange between Mn and Fe in LaMn1−xFexO310.1103/PhysRevB.70.014422 ↗
43. Chemical manipulation of oxygen vacancy and antibacterial activity in ZnO10.1016/j.msec.2017.03.280 ↗
44. Effects of La3+ or Ti4+ doping on dielectric and microwave absorption performance of CaMnO3 in the 8.2–18 GHz10.1007/s10854-021-05688-x ↗
45. Unravelling the synergy of Ce dopant and surface oxygen vacancies confined in FeTiO3 perovskite for peroxymonosulfate activated degradation of wide range of pollutants10.1016/j.jpcs.2023.111276 ↗
46. Understanding the roles of oxygen vacancies in hematite-based photoelectrochemical processes10.1002/anie.201810583 ↗
47. Multi-dimensional ordered mesoporous carbon/silica@Ni composite with hierarchical nanostructure for strong and broadband microwave absorption10.1016/j.carbon.2021.01.125 ↗
48. Morphology modulated defects engineering from MnO2 supported on carbon foam toward excellent electromagnetic wave absorption10.1016/j.carbon.2023.02.039 ↗
49. Tailoring the electromagnetic properties of perovskite La0.7Sr0.3MnO3 ceramics by Co doping10.1007/s10853-021-05813-5 ↗
50. Two-dimensional SnO/SnO2 heterojunctions for electromagnetic wave absorption10.1016/j.cej.2021.128445 ↗
51. Design of cellular structure of graphene aerogels for electromagnetic wave absorption10.1016/j.cej.2021.131894 ↗
52. Effect of Ag substitution on the electromagnetic property and microwave absorption of LaMnO310.1016/j.jmmm.2012.05.024 ↗
53. Excellent microwave absorption performance and wideband response of Pr1−xSrxMnO3 powders fabricated by sol–gel technique10.1007/s10971-020-05462-1 ↗
54. Improved electromagnetic dissipation of Fe doping LaCoO3 toward broadband microwave absorption10.1016/j.jmst.2021.06.058 ↗
55. Enhanced microwave absorption properties of La doping BaSnO3 ceramic powder10.1007/s10854-019-01917-6 ↗
56. Simultaneous enhancement of recoverable energy density and efficiency of lead-free relaxor-ferroelectric BNT-based ceramics10.1016/j.cej.2020.125951 ↗
57. Tunable microwave absorbing property of LaxFeO3/C by introducing A-site cation deficiency10.1007/s10854-019-01715-0 ↗
58. Interfacial polarizations induced by incorporating traditional perovskites into reduced graphene oxide (RGO) for strong microwave response10.1039/C8DT04966A ↗