journal article·2024-08

Improving perovskite solar cell efficiency and prolonging durability via interface modification with guanidinium iodide by post treatment method

Karthikeyan Embrose, Thangaraji Vasudevan, Lung-Chien Chen

Publisher page

Abstract

The performance of perovskite solar cells (PSCs) can be significantly compromised by the presence of halide vacancies on the perovskite surface, leading to defects and a decline in stability and efficiency. Effectively addressing this challenge, the application of Guanidinium iodide (GAI) as a post dopant treatment (POST) has demonstrated success. GAI (POST) not only reduces surface defects but also minimizes halide deficiencies and mitigates losses due to interfacial charge recombination. When incorporating a GAI additive at a solution concentration of 1.5 mg/ml in the modification layer with the perovskite composition Cs 0.1FA 0.8MA 0.1PbI 3, the PSC showed a notable power conversion efficiency (PCE) of 20.7%, surpassing the 16.3% efficiency of the control device. Moreover, the adapted device demonstrated an impressive fill factor (FF) of 80.1%. Notably, the enhanced film of the modified device maintained over 80% of its initial efficiency for more than 312 h, highlighting the prospect of creating affordable, effective, and durable PSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Organometal halide perovskites as Visible-light Sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
3. Perovskite Photonic sources10.1038/nphoton.2016.62 ↗
4. Bright light-emitting diodes based on Organometal halide perovskite10.1038/nnano.2014.149 ↗
5. All-inorganic perovskite Nanocrystals for high-efficiency light emitting diodes: Dual-phase CsPbBr3-CsPb2Br5 Composites10.1002/adfm.201600958 ↗
6. Highly Narrowband perovskite Single-crystal photodetectors enabled by surface-charge recombination10.1038/nphoton.2015.156 ↗
7. High charge carrier Mobilities and lifetimes in Organolead Trihalide perovskites10.1002/adma.201305172 ↗
8. Compositional engineering of perovskite materials for high-performance solar cells
9. Direct measurement of the exciton binding energy and effective Masses for charge carriers in organic–inorganic Tri-halide perovskites10.1038/nphys3357 ↗
10. Recent Progresses on defect passivation toward efficient perovskite solar cells10.1002/aenm.201902650 ↗
11. Meniscus-assisted solution Printing of large-Grained perovskite films for high-efficiency solar cells10.1038/ncomms16045 ↗
12. A Solvent-and Vacuum-Free route to large-Area perovskite films for efficient solar Modules
13. Efficient perovskite solar cells fabricated by Co Partially Substituted hybrid perovskite10.1002/aenm.201703178 ↗
14. Efficient, stable, and Scalable perovskite solar cells using Poly(3-hexylthiophene)
15. Alternative perovskites for photovoltaics10.1002/aenm.201703120 ↗
16. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations10.1038/nenergy.2017.102 ↗
17. Diffusion engineering of ions and charge carriers for stable efficient perovskite solar cells
18. Surface passivation of perovskite film for efficient solar cells10.1038/s41566-019-0398-2 ↗
19. Ionic transport in hybrid lead iodide perovskite solar cells
20. Giant Switchable photovoltaic effect in Organometal Trihalide perovskite devices
21. Origin and Elimination of photocurrent hysteresis by Fullerene passivation in CH3NH3PbI3 planar Heterojunction solar cells
22. Bifacial Contact Junction engineering for high-performance perovskite solar cells with efficiency Exceeding 2110.1002/smll.201900606 ↗
23. Accelerated degradation of Methylammonium lead iodide perovskites induced by exposure to iodine Vapour10.1038/nenergy.2016.195 ↗
24. Iodide Management in Formamidinium-lead-halide–based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
25. Maximizing and stabilizing Luminescence from halide perovskites with potassium passivation
26. Cation and anion Immobilization through chemical bonding enhancement with Fluorides for stable halide perovskite solar cells10.1038/s41560-019-0382-6 ↗
27. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations10.1038/nenergy.2017.102 ↗
28. Suppression of Atomic vacancies via incorporation of Isovalent small ions to increase the stability of halide perovskite solar cells in ambient air10.1038/s41560-018-0192-2 ↗
29. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations10.1038/nenergy.2017.102 ↗
30. Maximizing and stabilizing Luminescence from halide perovskites with potassium passivation
31. Controllable Self-induced passivation of hybrid lead iodide perovskites toward high-performance solar cells10.1021/nl501838y ↗
32. Maximizing and stabilizing Luminescence from halide perovskites with potassium passivation
33. Cation and anion Immobilization through chemical bonding enhancement with Fluorides for stable halide perovskite solar cells
34. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations
35. Suppression of Atomic vacancies via incorporation of Isovalent small ions to increase the stability of halide perovskite solar cells in ambient air
36. Mixed cations enabled combined bulk and interfacial passivation for efficient and stable perovskite solar cells10.1007/s40820-023-01085-7 ↗
37. Guanidinium iodide modification enabled highly efficient and stable all-inorganic CsPbBr3 perovskite solar cells10.1016/j.electacta.2020.137360 ↗
38. Fast Oxygen diffusion and iodide defects Mediate Oxygen-induced degradation of perovskite solar cells
39. Magic guanidinium cations in perovskite solar cells: from bulk to interface10.1039/D2QM01315K ↗
40. Optical properties and electronic structure of amorphous Germanium10.1002/pssb.19660150224 ↗
41. Conduction in Non-Crystalline Systems V. Conductivity, optical absorption, and Photoconductivity in amorphous Semiconductors10.1080/14786437008221061 ↗
42. Reducing surface halide deficiency for efficient and stable iodide-based perovskite solar cells10.1021/jacs.9b13418 ↗
43. Preparation of Tortuous 3D γ-CsPbI3 films at low temperature by CaI2 as dopant for highly efficient perovskite solar cells10.1002/adfm.201808986 ↗
44. The synergistic effect of Non-Stoichiometry and Sb-doping on air-stable α-CsPbI3 for efficient Carbon-based perovskite solar cells10.1039/C7NR09657G ↗
45. Bismuth incorporation stabilized α-CsPbI3 for fully inorganic perovskite solar cells10.1021/acsenergylett.7b00508 ↗
46. Phase stability improvement of γ-CsPbI3 perovskite solar cell utilizing a barium Bis(trifluoromethanesulfonimide) solution10.1021/acsami.3c10668 ↗
47. Experimental and theoretical investigations of MAPbX3-based perovskites (X=Cl, Br, I) for photovoltaic applications
48. Additive effects of guanidinium iodide on CH3NH3PbI3 perovskite solar cells10.1002/pssa.202100396 ↗
49. Ionic compensation for defect reduction and enhanced performance of tin-based perovskite solar cells10.1016/j.jpowsour.2022.232595 ↗
50. Structural and Photophysical properties of guanidinium–iodide-treated perovskite solar cells10.1002/solr.202200852 ↗
51. Controlled crystallization and surface engineering of mixed-halide γ-CsPbI2Br inorganic perovskites via guanidinium iodide additive in air-processed perovskite solar cells
52. Double Side interfacial Optimization for low-temperature stable CsPbI2Br perovskite solar cells with high efficiency beyond 1610.1002/eem2.12212 ↗