journal article·2024-05

Air-processed 2D/3D perovskite solar cell achieve high-efficient and stable performance via graded interface engineering

Sun Zeyuan, Gu Ningxia, Zha Leying, Ning Lei, Du Pingfan, Shi Chenyang, Song Lixin, Xiong Jie

Publisher page

Abstract

Organic-inorganic hybrid perovskite solar cells (PSCs) has been rapid development due to the excellent photoelectric properties, but it also faces the issues of poor stability in high humidity environment. The introduction organic diammonium iodide could effectively passivate defect and improve stability in three-dimensional (3D) perovskite by forming Dion-Jacobson (DJ) phase two-dimensional (2D) perovskites. Here, a stable alternative, 4-(aminomethyl) piperidinium iodide (AMPI), is developed for high-performance 2D/3D PSCs. The DJ 2D perovskite layer which is grown in-situ on the 3D perovskite not only boosts the stability of PSCs due to its intrinsically stable structure and alternating hydrogen bonding interactions between the layers of organic and inorganic, but also modulates the energy levels aligned possibly between perovskite layer and spiro-OMeTAD HTL, thus facilitate the charge transfer and improves the open-circuit voltage (V oc ). Finally, 20.11% power conversion efficiency (PCE) has been achieved of the 2D/3D PSCs. Furthermore, they exhibit batter stability in compassion of the control when they are stored in air conditions (25 °C and dark conditions) and 30–40% relative humidity for 700 h, which is owed to the moisture attacks protection from the layer of 2D perovskite to 3D perovskite films. This paper indicates the manufacture of high-performance and stable 2D-3D heterojunction PSCs used by nitrogenous heterocyclic compounds has a potential broad application prospect.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
2. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
3. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals10.1126/science.aaa2725 ↗
4. Understanding the physical properties of hybrid perovskites for photovoltaic applications10.1038/natrevmats.2017.42 ↗
5. Square-centimeter solution-processed planar CH3NH3PbI3 perovskite solar cells with efficiency exceeding 1510.1002/adma.201502586 ↗
6. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
7. Best Research-Cell Efficiencies. https://www.nrel.gov/pv/cell-efficiency.html..
8. Efficient, stable solar cells by using inherent bandgap of alpha-phase formamidinium lead iodide10.1126/science.aay7044 ↗
9. Organic-inorganic perovskites: structural versatility for functional materials design10.1021/acs.chemrev.5b00715 ↗
10. Making and breaking of lead halide perovskites10.1021/acs.accounts.5b00455 ↗
11. Stable high-performance perovskite solar cells via grain boundary passivation10.1002/adma.201706576 ↗
12. Benefit of grain boundaries in organic-inorganic halide planar perovskite solar cells10.1021/acs.jpclett.5b00182 ↗
13. Minimizing non-radiative recombination losses in perovskite solar cells10.1038/s41578-019-0151-y ↗
14. Imperfections and their passivation in halide perovskite solar cells10.1039/C8CS00853A ↗
15. Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells10.1039/C3TA13606J ↗
16. Enhanced stability in cesium assisted hybrid 2D/3D-perovskite thin films and solar cells prepared in ambient humidity10.1016/j.solener.2019.07.081 ↗
17. Progress in ambient air-processed perovskite solar cells: insights into processing techniques and stability assessment10.1016/j.solener.2021.07.002 ↗
18. Degradation mechanisms of perovskite solar cells under vacuum and one atmosphere of nitrogen10.1038/s41560-021-00912-8 ↗
19. High performance perovskite solar cells fabricated under high relative humidity conditions10.1016/j.solmat.2017.01.004 ↗
20. Additive engineering for efficient and stable perovskite solar cells
21. Surface passivation toward efficient and stable perovskite solar cells
22. Recent progress on defect passivation of all‐inorganic halide perovskite solar cells10.1002/admi.202200636 ↗
23. In situ analysis reveals the role of 2D perovskite in preventing thermal-induced degradation in 2D/3D perovskite interfaces10.1021/acs.nanolett.0c01271 ↗
24. Surface passivation using 2D perovskites toward efficient and stable perovskite solar cells
25. Graded interface engineering of 3D/2D halide perovskite solar cells through ultrathin (PEA)2PbI4 nanosheets10.1016/j.cclet.2020.12.052 ↗
26. Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells10.1038/s41566-022-00985-1 ↗
27. Spontaneous internal encapsulation via dual interfacial perovskite heterojunction enables highly efficient and stable perovskite solar cells10.1021/acs.nanolett.3c00486 ↗
28. Dion-jacobson phase 2D layered perovskites for solar cells with ultrahigh stability10.1016/j.joule.2018.11.026 ↗
29. Electron-phonon scattering in atomically thin 2D perovskites10.1021/acsnano.6b04265 ↗
30. Pure chloride 2D/3D heterostructure passivation for efficient and stable perovskite solar cells10.1002/aesr.202370012 ↗
31. Creating a dual-functional 2D perovskite layer at the interface to enhance the performance of flexible perovskite solar cells10.1002/smll.202102368 ↗
32. Pseudo-halide anion engineering for alpha-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗
33. D–A–π–A organic sensitizer surface passivation for efficient and stable perovskite solar cells10.1039/D1TA07963H ↗
34. Flexible perovskite solar cells with simultaneously improved efficiency, operational stability, and mechanical reliability10.1016/j.joule.2021.04.014 ↗
35. A tailored spacer molecule in 2D/3D heterojunction for ultralow-voltage-loss and stable perovskite solar cells10.1039/D1TA08984F ↗
36. Hybrid dion-jacobson 2D lead iodide perovskites10.1021/jacs.8b00542 ↗
37. Cation exchange strategy to construct nanopatterned Zn:NiOx electrode with highly conductive interface for efficient inverted perovskite solar cells10.1016/j.cej.2023.141358 ↗
38. Effective multifunctional additive engineering for efficient and stable inverted perovskite solar cells10.1002/solr.202200645 ↗
39. Ferroelectricity and rashba effect in a two-dimensional dion-jacobson hybrid organic-inorganic perovskite10.1021/jacs.9b07776 ↗
40. Interfacial modification via a 1,4-butanediamine-based 2D capping layer for perovskite solar cells with enhanced stability and efficiency10.1021/acsami.1c21036 ↗
41. Bromine doping as an efficient strategy to reduce the interfacial defects in hybrid two-dimensional/three-dimensional stacking perovskite solar cells10.1021/acsami.8b09461 ↗
42. Alkali cation doping for improving the structural stability of 2D perovskite in 3D/2D PSCs10.1021/acs.nanolett.9b04661 ↗
43. Origins and influences of metallic lead in perovskite solar cells10.1016/j.joule.2022.03.005 ↗
44. Rethinking the role of excess/residual lead iodide in perovskite solar cells
45. Ligand‐Modulated excess PbI2 nanosheets for highly efficient and stable perovskite solar cells
46. The emergence of the mixed perovskites and their applications as solar cells10.1002/aenm.201700491 ↗
47. Role of microstructure in oxygen induced photodegradation of methylammonium lead triiodide perovskite films10.1002/aenm.201700977 ↗
48. Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells10.1039/C6EE00409A ↗
49. Perovskite solar cell stability in humid air: partially reversible phase transitions in the PbI2-CH3NH3I-H2O system10.1002/aenm.201600846 ↗
50. High-performance perovskite solar cells with enhanced environmental stability based on a (p-FC6H4C2H4NH3)2[PbI4] capping layer10.1002/aenm.201802595 ↗
51. Spacer engineering using aromatic formamidinium in 2D/3D hybrid perovskites for highly efficient solar cells10.1021/acsnano.1c02191 ↗
52. Efficient and hysteresis-free mixed-dimensional 2D/3D perovskite solar cells using ethyl lactate as a green additive to perovskite precursor solutions10.1039/D2TC03313E ↗
53. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 2110.1038/nenergy.2016.142 ↗
54. Multifunctional chemical linker imidazoleacetic acid hydrochloride for 21% efficient and stable planar perovskite solar cells10.1002/adma.201902902 ↗
55. Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells10.1038/nenergy.2016.81 ↗
56. Visualizing band alignment across 2D/3D perovskite heterointerfaces of solar cells with light-modulated scanning tunneling microscopy10.1016/j.nanoen.2021.106362 ↗
57. Highly efficient and stable 2D dion jacobson/3D perovskite heterojunction solar cells10.1021/acsami.2c04455 ↗
58. Revealing charge carrier mobility and defect densities in metal halide perovskites via space-charge-limited current measurements10.1021/acsenergylett.0c02599 ↗
59. Compositional optimization of a 2D–3D heterojunction interface for 22.6% efficient and stable planar perovskite solar cells10.1039/D0TA09209F ↗
60. Indigo: a natural molecular passivator for efficient perovskite solar cells10.1002/aenm.202202288 ↗
61. Systematic investigation of the impact of operation conditions on the degradation behaviour of perovskite solar cells10.1038/s41560-017-0060-5 ↗
62. Understanding the transformation of 2D layered perovskites to 3D perovskites in the sonochemical synthesis10.1021/acs.jpcc.1c02227 ↗