journal article·2024-05

Image analysis development for optimization of 4H–SiC trench recovery treatment by combination of gas etching and sacrificial oxidation approaches

M. Barcellona, P. Badalà, M. Boscaglia, M. Cantiano, D. Mello, E. Ferlito, M.D. Pirnaci, D. Tenaglia, M.E. Fragalà

Publisher page

Abstract

Silicon Carbide (SiC) is one of the most promising new-generation semiconductor material for high-power and high-efficiency electronic devices overcoming in some respects silicon mature performances. SiC substrates are more and more widely used in many semiconductor-based applications, like DC/AC converters. SiC-based MOSFET technology is nowadays applied in electric/hybrid vehicle power conversion systems. To further enhance the performance of SiC HV devices, trench-gate MOSFET design is preferred to planar-gate MOSFET structure. The trenches frame is defined by Reactive Ion Etching (RIE) by which high aspect ratio structures can be attained. Despite the fine-tuning of the etching process, some sidewall striations’ undesired effects occur, degrading the performances of the devices. Accordingly, H2 gas etching and sacrificial oxidation methods were adopted to recover the wall integrity, trying to restore the atomic roughness that characterizes the 4H–SiC. Since this problem interests vertically oriented trench sidewalls, a quantitative estimation of the roughness is difficult as Atomic Force Microscopy (AFM) mea surements are always time-dispending and hard to manage: therefore, only a qualitative evaluation of the sidewall roughness can be accomplished by FIB/SEM micrographs. ImageJ software is herein used for a quantitative analysis starting from SEM images allowing a fast and repeatable quality assessment of trench striations before and after the recovery processes. The image analysis can produce numerical data regarding the status of the SiC trenches. In the present work, we will refer to the image analysis output value as Relative Roughness (RR). It represents the numerical data helpful to fulfill the study with a Design of Experiments (DOE) and Responsive Surface Method (RSM) aimed to optimize the post-etch recovery procedures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Copper Interconnects and Reliability · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Abelein · 2013 · 870
2. Design of low-cost voltage sensing method of three-phase synchronous rectifier with high-efficiency for automotive alternator
3. Selected applications of the MOSFETS in AC-DC rectifier systems
4. A matrix-Z-source converter for automotive integrated starter alternator system
5. A high efficient synchronous rectifier for next generation automotive alternator applications, 2018 International Conference on Electronics Packaging and IMAPS All Asia Conference
6. Determination of optimum structure of 4H-SiC trench MOSFET
7. 4H-SiC Trench MOSFET with bottom oxide protection10.4028/www.scientific.net/MSF.778-780.919 ↗
8. Nakamura · 2011
9. Automated RDSon characterization for power MOSFETS
10. The trench power MOSFET: Part i - history, technology, and prospects10.1109/TED.2017.2653239 ↗
11. Isotropic Channel mobility in UMOSFETs on 4H-SiC C-face with vicinal off-angle10.4028/www.scientific.net/MSF.645-648.999 ↗
12. Anomalously anisotropic channel mobility on trench sidewalls in 4H-SiC trench-gate metal-oxide-semiconductor field-effect transistors fabricated on 8° off substrates10.1063/1.2434157 ↗
13. Johnson · 1999 · 57
14. Progress in wide bandgap semiconductor SiC for power devices
15. Proposal of quasi thermal equilibrium model for etching phenomenon by gases: example of the etching of 4H-SiC by H210.7567/JJAP.53.046501 ↗
16. Comparison of 6H-SiC, 3C-SiC, and Si for power devices10.1109/16.199372 ↗
17. Micro-trench free 4H-SiC etching with improved SiC/SiO2 selectivity using inductively coupled SF6/O2/Ar plasma10.1088/1402-4896/ab63ed ↗
18. High-temperature etching of SiC in SF6/O2 inductively coupled plasma
19. Observation and modulation of gas film and plasma behavior in electrolytic plasma hybrid etching of semiconductor material 4H–SiC10.1016/j.precisioneng.2021.12.005 ↗
20. Antony · 2023 · 233
21. Response surface methodology (RSM): an overview to analyze multivariate data10.18231/j.ijmr.2022.042 ↗
22. Response surface methodology approach in achieving multi-response setup optimization in the machining process10.56294/saludcyt2022190 ↗
23. Multiscale simulations of plasma etching in silicon carbide structures10.4028/p-n9v122 ↗
24. Systematic characterization of plasma-etched trenches on 4H-SiC wafers10.1021/acsomega.1c02905 ↗
25. Structure and morphology of 4H-SiC wafer surfaces after H2-etching10.4028/www.scientific.net/MSF.483-485.761 ↗
26. High temperature isotropic and anisotropic etching of silicon carbide using forming gas10.1116/6.0000533 ↗
27. Surface preparation of 4° off-Axis 4H-SiC substrate for epitaxial growth10.4028/www.scientific.net/MSF.740-742.225 ↗
28. Fabrication of SiO2/4H-SiC (0001) interface with nearly ideal capacitance-voltage characteristics by thermal oxidation10.1063/1.4891166 ↗
29. Interface-reaction-limited growth of thermal oxides on 4H-SiC (0001) in nanometer-thick region10.1063/1.4864284 ↗
30. Understanding of growth kinetics of thermal oxides on 4H-SiC (0001) for control of MOS characteristics10.1149/06102.0135ecst ↗
31. Moulder · 1992
32. Raymund · 2000
33. Growth of 4H-SiC epilayers with low surface roughness and morphological defects density on 4° off-axis substrates10.1016/j.apsusc.2013.01.018 ↗
34. Characterization of epitaxial layers grown on 4H-SiC (0 0 0 −1) substrates10.1016/j.jcrysgro.2022.127048 ↗
35. ImageJ2: ImageJ for the next generation of scientific image data10.1186/s12859-017-1934-z ↗
36. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
37. A Si–O–Si bridge assembled from 3-mercaptopropyltrimethoxysilane and silicon carbide for effective charge transfer in photocatalysis10.1007/s10853-018-2518-7 ↗
38. Study of carbon in thermal oxide formed on 4H-SiC by XPS10.4028/www.scientific.net/MSF.483-485.653 ↗
39. Facile radiolytic synthesis of ruthenium nanoparticles on graphene oxide and carbon nanotubes10.1016/j.mseb.2015.12.005 ↗
40. Chemical structure of the interface in ultrathin HfO2/Si films10.1063/1.1645984 ↗
41. Film thickness measurements of SiO2 by XPS10.1002/sia.740210107 ↗
42. High-K metal gate stacks with ultra-thin interfacial layers formed by low temperature microwave-based plasma oxidation10.1016/j.mee.2017.05.041 ↗
43. A comprehensive study of hydrogen etching on the major SiC polytypes and crystal orientations10.4028/www.scientific.net/MSF.615-617.589 ↗
44. Surface studies of hydrogen etched 3C-SiC(001) on Si(001)10.1063/1.2768870 ↗
45. Growth mechanism of SiC CVD: surface etching by H2, H atoms, and HCl10.1021/acs.jpca.7b10800 ↗
46. Origin of giant step bunching on 4H-SiC (0001) surfaces
47. Investigation of the giant step bunching induced by the etching of 4H-SiC in Ar-H2 mix gases10.7567/JJAP.55.095501 ↗
48. Proposal of quasi thermal equilibrium model for etching phenomenon by gases: example of the etching of 4H-SiC by H210.7567/JJAP.53.046501 ↗
49. Pore wall thinning of mesoporous 4H-SiC by sacrificial oxidation10.1002/crat.201800120 ↗