journal article·2024-05

Light harvesting and carrier transfer enhancement of all-inorganic CsPbBr3 perovskite solar cells by Al-doped ZnO nanorod arrays

Jianlin Chen, Zihan Wu, Shu Chen, Wei Zhao, Yu Zhang, Wenxia Ye, Ruoxi Yang, Li Gong, Zhuoyin Peng, Jian Chen

Publisher page

Abstract

Zinc oxide nanorod arrays (ZnO NRAs) have been previously introduced as electron transport layer (ETL) of perovskite solar cells (PSCs) due to their high electron mobility and unique textured morphology. However, the presence of hydroxyl and oxygen vacancies on the surface of bare intrinsic ZnO NRAs may act as defect centers leading to carrier nonradiative recombination and the device photovoltaic performance degradation. Here, we propose a mutilayer SnO 2 /Al-doped ZnO nanorod arrays/SnO 2 (SnO 2/AZO NRAs/SnO 2) composite to be utilized as ETL of all-inorganic CsPbBr 3 PSCs. The influence of AZO NRAs with various Al ion (Al 3+) doping content on the performance of CsPbBr 3 PSCs was explored. The hole-free carbon-based CsPbBr 3 PSCs with an architecture of FTO/SnO 2/AZO NRAs/SnO 2/CsPbBr 3/carbon based on 1 at% AZO NRAs exhibited the best photovoltaic performance with a champion power conversion efficiency (PCE) of 7.11 %, open-circuit voltage ( V oc) of 1.46 V, short-circuit current density ( J sc) of 6.88 mA/cm 2, and fill factor ( FF) of 71.1 %, compared with the bare intrinsic ZnO-based counterpart with a PCE of 3.45 %, V oc of 0.80 V, J sc of 8.46 mA/cm 2, and FF of 51 %, respectively. The photovoltaic performance enhancement can be atrributed to enhanced light collection and electron extraction capability, with lower open-circuit voltage loss and more suitable interface band alighment. It is notable that the AZO NRAs were prepared by a facile electrodeposition approach to obtain large-area textured ETLs. This strategy may also be applicable to the photovoltaic performance improvemet of all types of PSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Advancing vapor-deposited perovskite solar cells via machine learning10.1039/D3TA00027C ↗
3. Research progress on organic–inorganic halide perovskite materials and solar cells10.1088/1361-6463/aaa727 ↗
4. Recent progress in electron transport layers for efficient perovskite solar cells10.1039/C5TA09011C ↗
5. Current status of electron transport layers in perovskite solar cells: materials and properties10.1039/C7RA00002B ↗
6. Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide10.1039/C6EE02390H ↗
7. Suppressing recombination in perovskite solar cells via surface engineering of TiO2 ETL10.1016/j.solener.2019.12.070 ↗
8. 24.8%-efficient planar perovskite solar cells via ligand-engineered TiO2 deposition10.1016/j.joule.2022.07.004 ↗
9. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
10. Perovskite solar cells: from materials to devices10.1002/smll.201402767 ↗
11. Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells10.1038/ncomms3885 ↗
12. Enhancement of exciton binding energies in ZnO/ZnMgO multiquantum wells10.1063/1.1445280 ↗
13. ZnO nanostructures for dye‐sensitized solar cells10.1002/adma.200803827 ↗
14. Surface engineering of ZnO electron transporting layer via Al doping for high efficiency planar perovskite solar cells10.1016/j.nanoen.2016.08.035 ↗
15. General route to vertical ZnO nanowire arrays using textured ZnO seeds10.1021/nl050788p ↗
16. Schottky nanocontacts on ZnO nanorod arrays10.1063/1.1584089 ↗
17. Hydrothermally grown oriented ZnO nanorod arrays for gas sensing applications10.1088/0957-4484/17/19/037 ↗
18. Direct electrodeposition of ZnO nanotube arrays in anodic alumina membranes10.1021/jp0711242 ↗
19. ChemInform abstract: low‐temperature growth of well‐aligned ZnO nanorods by chemical vapor deposition10.1002/chin.200215007 ↗
20. Mechanism and optimized process conditions of forming one-dimensional ZnO nanorods with Al-doping by electrodeposition method
21. Defects in ZnO nanorods prepared by a hydrothermal method10.1021/jp063239w ↗
22. Synthesis of ZnO nanostructures using sol-gel method10.1016/j.proche.2016.03.095 ↗
23. Compact layer free perovskite solar cells with 13.5% efficiency10.1021/ja508758k ↗
24. Kumar, hydrothermally grown ZnO nanorods as promising materials for low cost electronic skin10.1002/cnma.201900620 ↗
25. High efficiency low-temperature processed perovskite solar cells integrated with alkali metal doped ZnO electron transport layers10.1021/acsenergylett.8b00493 ↗
26. Defect passivation strategies in perovskites for an enhanced photovoltaic performance10.1039/D0EE01767A ↗
27. Iodine-doped ZnO nanopillar arrays for perovskite solar cells with high efficiency up to 18.2410.1039/C7TA03150E ↗
28. Energy-level variations of Cu-doped ZnO fabricated through sol-gel processing10.1016/j.jallcom.2017.01.174 ↗
29. TiO2 passivation for improved efficiency and stability of ZnO nanorods based perovskite solar cells10.1039/C6RA12126H ↗
30. Defect passivation by fullerene derivative in perovskite solar cells with aluminum-doped zinc oxide as electron transporting layer10.1021/acs.chemmater.9b01292 ↗
31. High-quality oriented ZnO films grown by sol–gel process assisted with ZnO seed layer10.1016/j.jpcs.2010.01.001 ↗
32. Tailored lattice “tape” to confine tensile interface for 11.08%‐efficiency all‐inorganic CsPbBr3 perovskite solar cell with an ultrahigh voltage of 1.702 V10.1002/advs.202101418 ↗
33. Photovoltaic performance enhancement of all‐inorganic CsPbBr3 perovskite solar cells using In2S3 as electron transport layer via facile reflux‐condensation process
34. Dependence of precursors on solution-processed SnO2 as electron transport layers for CsPbBr3 perovskite solar cells10.1142/S1793292020501611 ↗
35. Carrier transfer enhancement of all-inorganic CsPbBr3 perovskite solar cells with ZnO nanorod arrays as electron transport layer
36. Effect of seed layer on the growth of ZnO nanorods10.1021/jp0655017 ↗
37. Zinc oxide based photocatalysis: tailoring surface-bulk structure and related interfacial charge carrier dynamics for better environmental applications10.1039/C4RA13299H ↗
38. Stabilization of organometal halide perovskite films by SnO2 coating with inactive surface hydroxyl groups on ZnO nanorods10.1016/j.jpowsour.2016.11.046 ↗
39. ZnO nanorod arrays as light trapping structures in amorphous silicon thin-film solar cells10.1016/j.solmat.2013.12.025 ↗
40. Exploring the carrier dynamics in zinc oxide–metal halide-based perovskite nanostructures: toward reduced dielectric loss and improved photocurrent10.1021/acs.jpcc.8b09403 ↗
41. Long-term stable perovskite solar cells with room temperature processed metal oxide carrier transporters10.1039/C9TA06875A ↗
42. A dopant‐free zwitterionic conjugated polyelectrolyte as a hole‐transporting and interfacial material for perovskite solar cells10.1002/solr.202000206 ↗
43. Electrostatic self-assembled metal oxide/conjugated polyelectrolytes as electron-transporting layers for inverted solar cells with high efficiency10.1021/jp405176u ↗
44. Novel molecular doping mechanism for n-doping of SnO2 via triphenylphosphine oxide and its effect on perovskite solar cells10.1002/adma.201805944 ↗
45. All-inorganic, hole-transporting-layer-free, carbon-based CsPbIBr2 planar solar cells with ZnO as electron-transporting materials10.1016/j.jallcom.2019.152768 ↗
46. CsBr-induced stable CsPbI3- xBrx (x < 1) perovskite films at low temperature for highly efficient planar heterojunction solar cells10.1021/acsami.8b11474 ↗