journal article·2024-01

Characterization of electrical parameters in PbO/SnO2 double layer semiconductor (DLS) diodes

Elanur Seven, Defne Akay, Sema Bilge Ocak, Elif Öz Orhan

Publisher page

Abstract

The study examines how a double-layer semiconductor (DLS) structure affects the diodes' electrical parameters. As a double-layer structure, PbO (Lead oxide) and SnO2 (Tin (IV) oxide) were used to form the DLS hetero-structure. In the fabricated material, several electrical characteristic such as barrier-height (φb), series-resistance (Rs), and ideality-factor (n) of the PbO/SnO2 DLS diodes were investigated. The current-voltage (I–V) values were measured in the dark at 300 °K to extract the main electrical parameters for two identical diodes on the structure. The electrical properties of PbO/Tin Oxide DLS diodes such as series resistance (Rs),barrier height (φb), ideality factor (n) using the thermionic emission (TE) theory, Norde's method, and Cheung's functions have investigated. While φb and n values of Diode 1 using the TE method were computed to be 0.69 eV and 4.74 respectively, these values for Diode 2 were calculated as 0.72eV and 4.49, respectively. n and Rs values using the dV/dlnI vs I from Cheung's method for Diode 1 were also computed as 4.71 and 1.86 kΩ while these values for Diode 2 were found as 5.88 and 1.36 kΩ. φb and Rs values using the H(I) vs I from Cheung's method for Diode 1 were calculated as 0.70 eV and 0.16 kΩ, and they were computed as 0.80 eV and 0.14 kΩ for Diode 2. φb and Rs values using Norde Method were found as 0.74 eV and 88.29 kΩ for Diode 1, 0.82 eV and 59.81 kΩ for Diode 2. The product of free carrier concentration and mobility is implied by series resistance. The ideality factor is a criterion for determining how well a diode fits the ideal diode equation. Additionally, the barrier height is obtained using the carrier concentration in the PbO/SnO2 double-layer structure. Consequently, these structures, consisting of a double-layer hetero-structure with a PbO coated on SnO2, were found to have engaging electrical properties, allowing it to be used in device applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Semiconductor materials and interfaces · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Transparent conductors-a status review10.1016/0040-6090(83)90256-0 ↗
2. Synthesis and structural characterization of rutile SnO2 nanocrystals10.1557/JMR.2003.0176 ↗
3. Dynamics of the rutile structure III Lattice dynamics infrared and Raman spectra of SnO210.1088/0022-3719/4/15/027 ↗
4. The low resistive and transparent Al-doped SnO2 films: p-type conductivity nanostructures and photoluminescence10.1016/j.jallcom.2014.03.046 ↗
5. Structural electrical and optical properties of p-Type transparent conducting SnO2: Zn film10.1007/s10904-011-9619-y ↗
6. Schroder · 2006
7. Sze · 2006
8. Bias tunable photocurrent in metal-insulator-semiconductor heterostructures with photoresponse enhanced by carbon nanotubes10.3390/nano9111598 ↗
9. Hybrid graphene/silicon Schottky photodiode with intrinsic gating effect10.1088/2053-1583/aa6aa0 ↗
10. Comparıson of electronıc propertıes of poly(methyl methacrylate) wıth the double heterostructure (PMMA/Lead Oxıdes), Chap. 1
11. Low-temperature-fabricated ZnO AZO and SnO2 nanoparticle-based dye-sensitized solar10.3938/jkps.65.1315 ↗
12. Characterization of optical chemical and structural changes upon reduction of sol–gel deposited SnO2 thin films for optical gas sensing at high temperatures10.1016/j.tsf.2012.05.023 ↗
13. Fabrication of electrodeposited SnS/SnO2 heterojunction solar cells10.1143/JJAP.51.10NC38 ↗
14. Modeling and analysis of spray pyrolysis deposited SnO2 films for gas sensors10.1007/978-94-017-8832-8_22 ↗
15. Impurity level in SnO2 materials and its impact on gas sensing properties10.1016/j.snb.2015.01.038 ↗
16. Comparative study of electrochemical performance of SnO2 anodes with different nanostructures for lithium-ion batteries10.1166/jnn.2015.10282 ↗
17. Tin oxide transparent thin-film transistors10.1088/0022-3727/37/20/006 ↗
18. Electrochromism of highly doped nanocrystalline SnO2: Sb10.1021/jp0010031 ↗
19. Odor identification using a SnO2-based sensor array10.1016/S0925-4005(01)00885-1 ↗
20. Electrochromic glazing10.1590/S1516-14391999000100002 ↗
21. Characteristics of inkjet-printed nano indium tin oxide particles for transparent conducting electrodes10.1016/j.cap.2010.06.009 ↗
22. Hill · 1999
23. S. Sohn, Y. S. Han, Transparent conductive oxide TCO films for organic light emissive devices OLEDS, in: Organic Light Emirring Diode, S.H. Ko, Ed., IntechOpen, Article 9. DOI: 10.5772/18545P..
24. Pressure and temperature dependences of the Raman-active phonons in SnO210.1103/PhysRevB.7.2779 ↗
25. Structure and morphology of thin SnO2 films10.1016/0040-6090(90)90504-7 ↗
26. The role of interface states and series resistance on the I-V and C–V characteristics in Al/SnO2/p-Si Schottky diodes10.1016/S0038-1101(03)00182-5 ↗
27. Au/SnO2/n-Si MOS structures response to radiation and frequency10.1016/j.mejo.2003.09.003 ↗
28. CeO2 doped SnO2 sensor selective to ethanol in presence of CO LPG and CH410.1016/j.snb.2004.12.107 ↗
29. Field effect transistor fabricated from polyaniline-polyvinyl alcohol nanocomposite10.1007/s12648-010-0073-4 ↗
30. Rapid synthesis of nanocrystalline SnO2 powders by microwave heating method10.1016/S0167-577X(01)00445-1 ↗
31. Structural optical and electrical properties of tin oxide thin film deposited by APCVD method10.1007/s12648-011-0058-y ↗
32. Solgel synthesis and structural characterization of silver-silica nanocomposites10.1007/s12648-010-0142-8 ↗
33. Cross-linked porous polymer esins with reverse micellar imprints: factors affecting the porosity of the polymers10.1021/ma980599b ↗
34. Optical and electrical properties of SnO2: F thin films obtained by RF sputtering with various targets10.1155/1991/85965 ↗
35. Brinker · 2013
36. On the optical properties of SnO2 thin films prepared by sol-gel method10.1007/s12648-010-0072-5 ↗
37. Pavlov · 2017
38. Atomic layer deposition
39. Cathodic-arc and thermal-evaporation deposition
40. Crystal electron binding energy and surface work function control of tin dioxide10.1103/PhysRevB.89.115320 ↗
41. K. Mensah-Darkwa, R.O. Ocaya, A. Al-Sehemi , D. Yeboah, A. Dere, A.A. Al-Ghamdi, R. K. Gupta, F. Yakuphanoğlu, Optoelectronic enhancement of ZnO/p-Si Schottky barrier photodiodes by (Sn,Ti) co-doping, Phys. B Condens. Matter 667, 415155, https://doi.org/10.1016/j.physb.2023.415155..10.1016/j.physb.2023.415155 ↗
42. Matias · 2011 · 212
43. Characterization of electrical properties of Al/maleic anhydride MA/p-Si structures by well-known methods10.1016/j.synthmet.2014.02.024 ↗
44. Extraction of Schottky diode parameters from forward current‐voltage characteristics10.1063/1.97359 ↗
45. Ocaya–Yakuphanoğlu method for series resistance extraction and compensation of Schottky diode I–V characteristics10.1016/j.measurement.2021.110105 ↗
46. Rhoderick · 1988
47. A modified forward I-V plot for Schottky diodes with high series resistance10.1063/1.325607 ↗
48. Fabrication and electrical characteristics of Schottky diode based on organic material10.1016/j.mee.2008.04.003 ↗
49. Electronic properties of graphene/p-silicon Schottky junction10.1088/1361-6463/aac562 ↗
50. Ocak · 2014
51. Electrical properties of Graphene/Silicon structure with Al2O3 interlayer10.1007/s10854-020-03517-1 ↗