Surface modification of c-TiO2 via different phenyl boronic acid SAMs for improved performance of inverted organic solar cells
Source abstract
Abstract
Abstract In this study, phenyl boronic acid (PBA) self-assembled monolayers (SAMs) with different terminal groups were introduced on c-TiO2, as interfacial modification layer in organic solar cells (OSCs) with inverted structure. The morphological, optical, electrical properties and the surface wettability of c-TiO2 layer were successfully tuned by SAMs modification. The all five SAMs introduced to device configuration improved the photovoltaic performances. The NO2-PBA SAM modified device exhibited a power conversion efficiency (PCE) of 3.4 % with a short‐circuit current density of 9.68 mA cm−2, an open‐circuit voltage of 0.59 V and fill factor of 48.46 %. More than 50 % enhancement on the PCE was achieved thanks to better ohmic contact and energy level alignment at the interface resulting improved charge collection. The surface properties can be changed by varying the terminal group of molecules, which can control the charge transport properties leading high shunt resistance and low series resistance. Our results showed that the PBA SAMs can be used as efficient interfacial modification layer for inverted OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Conjugated materials containing dithieno[3,2-b:2′,3′-d]pyrrole and its derivatives for organic and hybrid solar cell applications10.1039/C8TA09383K ↗
2. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
3. Achieving over 16% efficiency for single-junction organic solar cells10.1007/s11426-019-9457-5 ↗
4. Poly(4-vinylpyridine): a new interface layer for organic solar cells,10.1021/acsami.6b12687 ↗
5. The effect of SrTiO3:ZnO as cathodic buffer layer for inverted polymer solar cells,10.1016/j.nanoen.2013.12.010 ↗
6. A review on the development of the inverted polymer solar cell architecture,10.1080/15583724.2010.515764 ↗
7. Improvement in performance of inverted organic solar cell by rare earth element lanthanum doped ZnO electron buffer layer10.1016/j.matchemphys.2019.122076 ↗
8. Interface modification for highly efficient organic photovoltaics10.1063/1.2885724 ↗
9. A low-cost and low-temperature processable zinc oxide-polyethylenimine (ZnO: PEI) nano-composite as cathode buffer layer for organic and perovskite solar cells,10.1016/j.orgel.2016.08.012 ↗
10. Effect of TiO2 modification with amino-based self-assembled monolayer on inverted organic solar cell10.1016/j.apsusc.2017.06.128 ↗
11. Surface structure modification of ZnO and the impact on electronic properties10.1002/adma.201503404 ↗
12. The role of self-assembled monolayers in electronic devices,10.1039/D0TC00388C ↗
13. A short review on interface engineering of perovskite solar cells: a self-assembled monolayer and its roles,10.1002/solr.202070021 ↗
14. Phosphonate- and carboxylate-based self-assembled monolayers for organic devices: a theoretical study of surface binding on aluminum oxide with experimental support,10.1021/am4008374 ↗
15. Tailoring of self-assembled monolayer for polymer light-emitting diodes10.1063/1.1398327 ↗
16. Control of carrier density by self-assembled monolayers in organic field-effect transistors10.1038/nmat1105 ↗
17. Applications of self-assembled monolayers for perovskite solar cells interface engineering to address efficiency and stability10.1002/aenm.202002989 ↗
18. Interfacial modification via boronic acid functionalized self-assembled monolayers for efficient inverted polymer solar cells10.1016/j.mssp.2019.104860 ↗
19. Role of interface properties in organic solar cells: from substrate engineering to bulk-heterojunction interfacial morphology10.1039/D0QM00398K ↗
20. Characterization of polymer/TiO2 photovoltaic cells by intensity modulated photocurrent spectroscopy10.1021/jp8032512 ↗
21. Effect of self-assembled monolayer treated ZnO as an electron transporting layer on the photovoltaic properties of inverted type polymer solar cells10.1016/j.synthmet.2013.11.002 ↗
22. Stacked structure as an interlayer in high-performance inverted polymer solar cells10.1021/acsami.8b18963 ↗
23. The spreading dynamics of a liquid drop on a viscoelastic solid, Journal of Physics D:
24. Molecular descriptors for polarity: the need for going beyond polar surface area10.4155/fmc-2016-0165 ↗
25. Structural and optical properties of TiO 2 thin films prepared by spin coating10.1007/s10971-014-3452-z ↗
26. Fullerene derivative-modified SnO2 electron transport layer for highly efficient perovskite solar cells with efficiency over 21%10.1021/acsami.9b09238 ↗
27. Kelvin probe force microscopy on Surfaces: investigation of the surface potential of self-assembled monolayers on gold10.1021/la9904861 ↗
28. Dye-sensitized nanocrystalline TiO2 solar cells based on novel coumarin dyes10.1016/S0927-0248(02)00460-9 ↗
29. Influence of molecular organization on the electrical characteristics of π-conjugated self-assembled monolayers10.1021/jp512991d ↗
30. Formation of oxygen vacancies and Ti3+ state in TiO2 thin film and enhanced optical properties by air plasma treatment10.1038/srep32355 ↗
31. Interaction of Chrysosporium merdarium with titanium oxide surface10.1016/j.synthmet.2010.01.043 ↗
32. Polymorphism-induced catalysis difference of TiO 2 nanofibers for rechargeable Li–O 2 batteries10.1039/C4TA04046E ↗
33. Carbazole-based green and blue-BODIPY dyads and triads as donors for bulk heterojunction organic solar cells10.1039/D0DT00637H ↗
34. Modification of photoelectrode with thiol-functionalized Calix[4]arenes as interface energy barrier for high efficiency in dye-sensitized solar cells10.1016/j.jpowsour.2016.01.015 ↗
35. Interface materials for organic solar cells10.1039/b921624c ↗
36. High-efficiency organic solar cells based on end-functional-group-modified poly(3-hexylthiophene)10.1002/adma.200902803 ↗
37. Self-assembled monolayer modified ITO in P3HT: PC61BM organic solar cells with improved efficiency10.1016/j.solmat.2014.01.048 ↗
38. Using self-assembling dipole molecules to improve charge collection in molecular solar cells10.1002/adfm.200500207 ↗