journal article·2025-05

Density functional theory based computation of the optoelectronic properties of double perovskites A2InAgBr6 (A= Na, Cs, Rb, and K) and their performance assessment as absorber for photovoltaic applications

Gagan Kumar, Babban Kumar Ravidas, Sagar Bhattarai, Mukesh Kumar Roy, Dip Prakash Samajdar

Publisher page

Abstract

Double perovskite (DP) halides have shown promising performance in photovoltaic (PV) and thermoelectric technologies. In the current work, the WIEN2K software is utilized to implement first-principles calculations on the absorber material A 2InAgBr 6 (where A stands for Cs, Rb, K, and Na) to compute its structural and optoelectronic properties. Furthermore, SCAPS-1D is utilized to evaluate the PV parameters of the n-i-p configuration of perovskite (PVSK) solar cell (PSC) configuration (FTO/ETL/A 2InAgBr 6/HTL/Au) with PEDOT: PSS as HTL (hole transport layer) and TiO 2 as the ETL (electron transport layer). PBE-GGA + TB-mBJ exchange-correlation potential method is utilized for the computations. The direct bandgaps (E g) of Na 2InAgBr 6 (1.87 eV), K 2InAgBr 6 (1.81 eV), Rb 2InAgBr 6 (1.75 eV), and Cs 2InAgBr 6 (1.76 eV) is obtained by TB-mBJ potential. The optical characteristics of A 2InAgBr 6 are computed to understand its potential for PV applications, correlating them with the electronic characteristics. DFT-calculated properties of A 2InAgBr 6 DP are utilized as inputs in SCAPS-1D for simulation. The thickness of PVSK (t) and defect density (N t) are usually considered while optimizing PSC performance using SCAPS-1D. A notable maximum power conversion efficiency (PCE) of 19.80 % with a short-circuit current density (J sc) of 20.13 mA/cm 2, an open-circuit voltage (V oc) of 1.22 V, and a fill factor (FF) of 79.78 %, is achieved with the structure FTO/TiO 2/Cs 2InAgBr 6/PEDOT: PSS/Au. This study is focused on the performance assessment of some relatively new DP halide structures using a combination of DFT as well as the SCAPS-1D calculation to find alternatives to the efficient lead-free PVSK absorber materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Heusler alloys: electronic and magnetic properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (92)

Show source-provided references
1. Solar water splitting cells10.1021/cr1002326 ↗
2. Modeling and analysis of HTM-free perovskite solar cells based on ZnO electron transport layer
3. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
4. Combined DFT, SCAPS-1D, and wxAMPS frameworks for design optimization of efficient Cs2BiAgI6-based perovskite solar cells with different charge transport layers10.1039/D2RA06734J ↗
5. A brief review of hole transporting materials commonly used in perovskite solar cells10.1007/s12598-020-01691-z ↗
6. Self-patterned CsPbBr3 nanocrystals for high-performance optoelectronics10.1021/acsami.8b17249 ↗
7. Behind the Breakthrough of the∼ 30% Perovskite Solar Cell10.1016/j.joule.2021.01.008 ↗
8. Lead‐free halide double perovskites: fundamentals, challenges, and photovoltaics applications
9. Lead‐free halide double perovskites: structure, luminescence, and applications
10. Aluminum-doped lead-free double perovskite Cs2AgBiCl6 nanocrystals with ultrahigh stability towards white light emitting diodes
11. Emerging study on lead‐free hybrid double perovskite (CH3NH3)2AgInBr6: potential material for energy conversion between heat and electricity10.1002/ente.202200002 ↗
12. Highly absorptive and mechanically stable double perovskites Cs2SnI6 and Cs2SnKrI610.1088/1402-4896/ac66a0 ↗
13. The emergence of halide layered double perovskites10.1021/acsenergylett.0c01867 ↗
14. Progress in theoretical study of lead-free halide double perovskite Na(2)AgSbX(6) (X = F, Cl, Br, and I) thermoelectric materials10.1007/s00894-023-05599-0 ↗
15. Double perovskites overtaking the single perovskites: a set of new solar harvesting materials with much higher stability and efficiency
16. Phase diagrams and stability of lead-free halide double perovskites Cs 2 BB'X 6 , B = Sb, Bi, B' = Cu, Ag, Au and X = Cl, Br, I
17. Electronic and optical properties of CsGeX(3) (X= Cl, Br, and I) compounds10.1021/acsomega.2c02088 ↗
18. Study of lead free double perovskites Na2XAgCl6 (X = Ga, in Tl) for solar cells and transport applications10.1088/1402-4896/acbdca ↗
19. Lead-free double perovskites for perovskite solar cells10.1002/solr.201900306 ↗
20. Band gaps of the lead-free halide double perovskites Cs2BiAgCl6 and Cs2BiAgBr6 from theory and experiment10.1021/acs.jpclett.6b01041 ↗
21. Theoretical study of lead-free mixed-valence mixed-halide Au-based perovskites for optoelectronics10.1016/j.mssp.2024.108692 ↗
22. A theoretical exploration of the structural feature, mechanical, and optoelectronic properties of Au-based halide perovskites A2AuIAuIIIX6 (A = Rb, Cs; X = Cl, Br, I)10.1039/D3CP04269C ↗
23. Investigation of structural, electronic and optical properties of na 2 inagcl 6, k 2 inagcl 6, and rb 2 inagcl 6 lead-free halide double perovskites regarding with cs 2 inagcl 6 perovskites cell and a comparative study by dft functionals10.1590/1980-5373-mr-2021-0086 ↗
24. Exploration of the photovoltaic properties of oxide-based double perovskite Bi 2 FeCrO 6 using an amalgamation of DFT with spin–orbit coupling effect and SCAPS-1D simulation approaches10.1039/D3NJ02841K ↗
25. Numerical investigation energy conversion performance of tin-based perovskite solar cells using cell capacitance simulator10.3390/en13225907 ↗
26. Hatamvand, Mohammad, et al. "The role of different dopants of Spiro-OMeTAD hole transport material on the stability of perovskite solar cells: A mini review." Vacuum 214 (2023): 112076.10.1016/j.vacuum.2023.112076 ↗
27. Enhancements in the mechanical stretchability and thermoelectric properties of PEDOT: PSS for flexible electronics applications10.1021/accountsmr.0c00021 ↗
28. The influence of the thickness of compact TiO2 electron transport layer on the performance of planar CH3NH3PbI3 perovskite solar cells10.3390/ma14123295 ↗
29. Tuning of the bandgap of Rb2ScAgX6 (X = Cl, Br, I) double perovskites through halide ion replacement for solar cell applications10.1016/j.mssp.2022.106819 ↗
30. Exploration of the photovoltaic properties of oxide-based double perovskite Bi2FeCrO6 using an amalgamation of DFT with spin-orbit coupling effect and SCAPS-1D simulation approaches10.1039/D3NJ02841K ↗
31. Lead-free perovskite and double perovskite solar cells10.1088/1757-899X/765/1/012047 ↗
32. Simulation and analysis of lead based perovskite solar cell using SCAPS-1D10.17485/ijst/2017/v11i10/110721 ↗
33. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
34. Numerical study of lead free CsSn0.5Ge0.5I3 perovskite solar cell by SCAPS-1D10.1016/j.ijleo.2021.168060 ↗
35. Evaluating the performance of Cs2PtI6-xBrx for photovoltaic and photocatalytic applications using first-principles study and SCAPS-1D simulation10.1016/j.heliyon.2022.e10808 ↗
36. An investigation on the influence of temperature variation on the performance of tin (Sn) based perovskite solar cells using various transport layers and absorber layers10.1016/j.rio.2021.100083 ↗
37. Optimization of highly efficient and eco-friendly EA-substituted tin based perovskite solar cell with different hole transport material10.1007/s11082-022-03740-6 ↗
38. New tolerance factor to predict the stability of perovskite oxides and halides10.1126/sciadv.aav0693 ↗
39. Theoretical design for the non-toxic and earth-abundant perovskite solar cell absorber materials10.3389/fmats.2020.00168 ↗
40. Highly efficient and stable Ra2LaNbO6 double perovskite for energy conversion device applications10.1016/j.mset.2023.07.005 ↗
41. On the stability of crystal lattices. I
42. Elasticity and anelasticity of metals10.1021/j150474a017 ↗
43. Ab-initio investigation of novel lead-free halide based Rb2CsXI6 (X = Ga, In) double perovskites: mechanical, structural, thermoelectric, and optoelectronic potential for photovoltaics and green energy applications10.1016/j.mseb.2024.117708 ↗
44. Theoretical predictions of structure and related properties of intermetallics10.1179/mst.1992.8.4.345 ↗
45. The voigt‐reuss‐hill approximation and elastic moduli of polycrystalline MgO, CaF2, β‐ZnS, ZnSe, and CdTe10.1063/1.1709944 ↗
46. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
47. A comprehensive DFT analysis of the physical, optoelectronic and thermoelectric attributes of Ba2lnNbO6 double perovskites for eco-friendly technologies10.1016/j.mseb.2024.117530 ↗
48. Deformation potentials in silicon. I. Uniaxial strain10.1103/PhysRev.128.2614 ↗
49. First-principles investigation of Cs2TlGaX6 (X= Cl, F) double perovskites: structural and dynamical stability, elastic properties, and optoelectronic characteristics for applications in semiconductor technology10.1007/s11082-024-07199-5 ↗
50. First-principles investigations of the mechanically and thermodynamically stable potassium-based double perovskites K2TlAsX6 (X = Cl, Br) for optoelectronic and renewable applications10.1016/j.mseb.2023.116830 ↗
51. Physical and optoelectronic features of lead-free A2AgRhBr6 (A = Cs, Rb, K, Na, Li) with halide double perovskite composition10.1039/D0TC02501A ↗
52. Non-leaded, KSnI3 based perovskite solar cell: a DFT study along with SCAPS simulation10.1016/j.matchemphys.2023.127426 ↗
53. Ab-initio study of hybrid perovskites Cs2AgGaCl6 for solar cells applications10.1016/j.hybadv.2024.100197 ↗
54. Analysis of absorber layer for wide-bandgap double perovskite solar cell using SCAPS-1D
55. Theoretical and computational exploration of electronic structure, optical properties, open circuit voltage, and toxicity of perovskites solar Cell:(Cs2SiX6, X= Cl, Br, and I)10.1016/j.hybadv.2023.100084 ↗
56. Optoelectronic and elastic properties of metal halides double perovskites Cs 2 InBiX 6 (X= F, Cl, Br, I)10.3788/COL202119.030004 ↗
57. Investigation of structural, electronic and optical properties of Na2 InAgCl6 , K2 InAgCl6 , and Rb2InAgCl6 lead-free halide double perovskites regarding with Cs2InAgCl 6 perovskites cell and a comparative study by DFT functionals10.1590/1980-5373-mr-2021-0086 ↗
58. Investigation of photovoltaic performance of lead-free CsSnI3-based perovskite solar cell with different hole transport layers: first Principle Calculations and SCAPS-1D Analysis10.1016/j.solener.2022.11.025 ↗
59. Wave-number-dependent dielectric function of semiconductors10.1103/PhysRev.128.2093 ↗
60. Probing direct bandgap of double perovskites Rb2LiTlX6 (X = Cl, Br) and optoelectronic characteristics for Solar cell applications: DFT calculations10.1016/j.jmrt.2022.04.073 ↗
61. First-principles study of lead-free double perovskites Ga2PdX6 (X = Cl, Br, and I) for solar cells and renewable energy10.1016/j.jmrt.2021.12.002 ↗
62. Screening the structural, dynamical, and mechanical stability, tuning band gaps, and optical properties of inorganic Cs2RbABr6 (A= Tl and Bi) double perovskites halide using DFT calculations10.1007/s11082-024-06704-0 ↗
63. First-principles studies on structural, electronic, optical and mechanical properties of inorganic CS2NaTlX6 (X= F, Cl, Br) double halide perovskites
64. Analysis of direct band gap A2ScInI6 (A=Rb, Cs) double perovskite halides using DFT approach for renewable energy devices10.1016/j.jmrt.2021.05.080 ↗
65. The effect of zinc concentration upon optical and dielectric properties of Cd1−xZnxSe10.1016/j.physb.2010.02.024 ↗
66. Temperature dependence of the optical properties of MgO: Ab initio molecular dynamics calculations10.1016/j.ijleo.2019.163421 ↗
67. Band structure and optical spectra of double perovskite Cs2AgBiBr6 for solar cells performance10.12693/APhysPolA.137.486 ↗
68. In-and Ga-based inorganic double perovskites with direct bandgaps for photovoltaic applications10.1039/C7CP03448B ↗
69. Study of optoelectronic and thermoelectric properties of double perovskites for renewable energy10.1088/1402-4896/ac297a ↗
70. Investigation of electronic, magnetic and thermoelectric properties of Zr2NiZ (Z= Al, Ga) ferromagnets10.1016/j.matchemphys.2017.01.056 ↗
71. Study of lead free double perovskites Na2XAgCl6 (X= Ga, in Tl) for solar cells and transport applications10.1088/1402-4896/acbdca ↗
72. First-principles study of electronic, dynamical and thermodynamic properties of Li 2 TiO 310.1140/epjb/e2012-20666-5 ↗
73. First principle study of electronic, mechanical, optical and thermoelectric properties of CsMO3 (M= Ta, Nb) compounds for optoelectronic devices10.1016/j.jmgm.2018.09.011 ↗
74. Pivotal avenue for hybrid electron transport layer-based perovskite solar cells with improved efficiency10.1038/s41598-023-33419-1 ↗
75. Perovskite-based solar cells: materials, methods, and future perspectives10.1155/2018/8148072 ↗
76. Effect of CH3NH3PbI3 thickness on device efficiency in planar heterojunction perovskite solar cells10.1039/C4TA02637C ↗
77. Saha · 2011 · 9
78. Simulation and analysis of methylammonium lead iodide (CH3NH3PbI3) perovskite solar cell with Au contact using SCAPS 1D simulator10.11648/j.ajop.20190702.12 ↗
79. Device engineering of perovskite solar cells to achieve near ideal efficiency10.1063/1.4931130 ↗
80. Design and numerical investigation of a lead-free inorganic layered double perovskite Cs4CuSb2Cl12 nanocrystal solar cell by SCAPS-1D10.3390/nano11092321 ↗
81. Natural band alignments and band offsets of Sb2Se3 solar cells10.1021/acsaem.0c01477 ↗
82. Theoretical analysis on effect of band offsets in perovskite solar cells10.1016/j.solmat.2014.10.036 ↗
83. Performance evaluation of lead–free double-perovskite solar cell10.1016/j.optmat.2021.110964 ↗
84. Numerical simulation of highly efficient double perovskite solar cell using SCAPS-1D
85. Study the effect of band offsets on the performance of lead-free double perovskite solar cell10.1016/j.optmat.2022.112112 ↗
86. Optimization of highly efficient inorganic lead-free double perovskite solar cells via SCAPS-1D10.1007/s12596-023-01440-2 ↗
87. Study of physical, optical, and electrical properties of cesium titanium (IV)-based single halide perovskite solar cell10.1109/JPHOTOV.2021.3050268 ↗
88. Performance evaluation of Au/p-CdTe/Cs2TiI6/n-TiO2/ITO solar cell using SCAPS-1D10.1016/j.optmat.2021.111105 ↗
89. Hydrogenated Cs2AgBiBr6 for significantly improved efficiency of lead-free inorganic double perovskite solar cell10.1038/s41467-022-31016-w ↗
90. Design and device numerical analysis of lead-free Cs2AgBiBr6 double perovskite solar cell10.3390/cryst13020267 ↗
91. Numerical simulation studies of a fully inorganic Cs2AgBiBr6 perovskite solar device10.1016/j.optmat.2020.109957 ↗
92. Cs2AgBiBr6-based perovskite solar cell: a novel combination of ITO/CdS/Cs2AgBiBr6/CuAlO2/Pt, with inorganic charge transport layers10.1016/j.ijleo.2023.170560 ↗