Novel oxygen vacancies-rich 3D porous ZnO for highly sensitive 3-hydroxy-2-butanone biomarker gas sensors
Source abstract
Abstract
Listeriosis can cause human death via infection by Listeria monocytogenes (LMs) with a high fatality rate of 20–30 %. Detection of 3-hydroxy-2-butanone (3H-2B) biomarker of LMs can achieve estimation of LMs content, which is of great significance for human health. Exploring porous metal oxide semiconductors (MOSs) with rich vacancies towards 3H-2B sensing is quite promising for achieving this goal. Herein, we report a highly sensitive 3H-2B sensor based on novel 3D porous ZnO with rich oxygen vacancies which was facilely obtained by sacrificing Zn foam in oxalic acid and subsequent thermal decomposition. The ZnO sensor displays ultrahigh sensor response of R a/R g = 328@5 ppm, super-low detection limit of 0.001 ppm, excellent cycling stability and selectivity and good linear response at 120 °C, showing great potential for precise detection of 3H-2B biomarker. The porous structure and increased oxygen vacancies contribute greatly to the adsorption of active oxygen species therefore the sensing reactions on ZnO surface, which accounts for the high sensing performance. Our work provides an ingenious strategy to produce novel 3D ZnO with rich oxygen vacancies as well as new insights for boosting the detection of LMs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. The global burden of listeriosis: a systematic review and meta-analysis10.1016/S1473-3099(14)70870-9 ↗
2. Listeria monocytogenes: towards a complete picture of its physiology and pathogenesis10.1038/nrmicro.2017.126 ↗
3. Pathogen detection: a perspective of traditional methods and biosensors10.1016/j.bios.2006.06.036 ↗
4. Multiplexed detection of pathogen DNA with DNA-based fluorescence nanobarcodes10.1038/nbt1106 ↗
5. TiO2 nanowire bundle microelectrode based impedance immunosensor for rapid and sensitive detection of Listeria monocytogenes10.1021/nl080366q ↗
6. Odor fingerprinting of Listeria monocytogenes recognized by SPME–GC–MS and E-nose10.1139/cjm-2014-0652 ↗
7. Metal oxide semiconductors for gas sensing
8. Mesoporous tungsten oxides with crystalline framework for highly sensitive and selective detection of foodborne pathogens10.1021/jacs.7b04221 ↗
9. Cr doped WO3 nanofibers enriched with surface oxygen vacancies for highly sensitive detection of the 3-hydroxy-2-butanone biomarker10.1039/C8TA08670B ↗
10. MOF-templated synthesis of cobalt-doped zinc oxide superparticles for detection of the 3-hydroxy-2-butanone microbial biomarker10.1016/j.snb.2022.131482 ↗
11. Rationally designed dual‐mesoporous transition metal oxides/noble metal nanocomposites for fabrication of gas sensors in real‐time detection of 3‐hydroxy‐2‐butanone biomarker10.1002/adfm.202107439 ↗
12. Tian · 2022 · vol. 137
13. Triethylamine gas sensor based on Pt-functionalized hierarchical ZnO microspheres10.1016/j.snb.2020.129425 ↗
14. Zinc oxide based gas sensors and their derivatives: a critical review10.1039/D2TC04690C ↗
15. Biogenic engineered zinc oxide nanoparticle for sulfur black dye removal from contaminated wastewater: comparative optimization, simulation modeling, and isotherms10.1080/21655979.2024.2325721 ↗
16. Microbially synthesised Zn@Fe3O4(M) and Zn@Fe3O4(ME) nanocomposites for textile effluent: central composite design optimisation and kinetic modelling
17. Influence of calcination temperature on the growth of electrospun multi-junction ZnO nanowires: a room temperature ammonia sensor10.1016/j.mssp.2020.105006 ↗
18. Hydrothermal synthesis of mesoporous ZnO microspheres as NOX gas sensor materials—calcination effects on microstructure and sensing performance10.1016/j.ceramint.2020.04.278 ↗
19. A comparative study on the acetone sensing properties of ZnO disk pairs, flowers, and walnuts prepared by hydrothermal method10.1016/j.apsusc.2022.153218 ↗
20. Synthesis and evolution of rod-like nano-scaled ZnC2O4· 2H2O whiskers to ZnO nanoparticles10.1039/b210472e ↗
21. Synthesis of ZnO nanoparticles and study of their influence on the mechanical properties and antibacterial activity of PMMA/ZnO composite for orthotic devices
22. Local structural studies through EXAFS and effect of Fe2+ or Fe3+ existence in ZnO nanoparticles10.1021/acs.jpcc.1c00881 ↗
23. A MOF‐derivative decorated hierarchical porous host enabling ultrahigh rates and superior long‐term cycling of dendrite‐free Zn metal anodes
24. ZnO nanosheets abundant in oxygen vacancies derived from metal‐organic frameworks for ppb‐level gas sensing
25. Plasma-induced oxygen vacancies enabled ultrathin ZnO films for highly sensitive detection of triethylamine10.1016/j.jhazmat.2021.125757 ↗
26. Facile fabrication and superior gas sensing properties of spongelike Co-doped ZnO microspheres for ethanol sensors10.1016/j.ceramint.2018.06.110 ↗
27. Oxygen vacancy defects engineering on Ce-doped α-Fe2O3 gas sensor for reducing gases10.1016/j.snb.2019.127165 ↗
28. Porosity and oxygen vacancy engineering of mesoporous WO3 nanofibers for fast and sensitive low-temperature NO2 sensing10.1016/j.jallcom.2020.157339 ↗
29. Oxygen vacancies enabled porous SnO2 thin films for highly sensitive detection of triethylamine at room temperature10.1021/acsami.0c04398 ↗
30. Ultralow detection limit MEMS hydrogen sensor based on SnO2 with oxygen vacancies10.1016/j.snb.2021.130982 ↗
31. Tunable oxygen vacancies of cobalt oxides for efficient gas sensing application10.1016/j.snb.2021.130860 ↗
32. Porous ZnO ultrathin nanosheets with high specific surface areas and abundant oxygen vacancies for acetylacetone gas sensing10.1021/acsami.9b06701 ↗
33. Ultrafast methanol sensing properties of nano-spindle like In2O3 hierarchical structures with oxygen vacancies10.1016/j.ceramint.2019.01.011 ↗
34. Synthesis, properties and applications of ZnO nanomaterials with oxygen vacancies: a review10.1016/j.ceramint.2018.02.013 ↗
35. 1D metal oxide semiconductor materials for chemiresistive gas sensors: a review10.1002/aelm.202100271 ↗
36. Nanostructured metal oxide semiconductor-based gas sensors: a comprehensive review10.1016/j.sna.2022.113578 ↗
37. Multichannel pathway-enriched mesoporous NiO nanocuboids for the highly sensitive and selective detection of 3-hydroxy-2-butanone biomarkers10.1039/C9TA01013K ↗
38. Bimetallic PtCu nanocrystal sensitization WO3 hollow spheres for highly efficient 3-hydroxy-2-butanone biomarker detection10.1021/acsami.0c02523 ↗
39. Gas sensor detecting 3-hydroxy-2-butanone biomarkers: boosted response via decorating Pd nanoparticles onto the {010} facets of BiVO4 decahedrons10.1021/acssensors.0c01149 ↗
40. Cocrystallization enabled spatial self‐confinement approach to synthesize crystalline porous metal oxide nanosheets for gas sensing
41. Modeling interfacial interaction between gas molecules and semiconductor metal oxides: a new view angle on gas sensing10.1002/advs.202203594 ↗
42. Advances in designs and mechanisms of semiconducting metal oxide nanostructures for high-precision gas sensors operated at room temperature10.1039/C8MH01365A ↗
43. Highly sensitive and selective gas sensors using p-type oxide semiconductors: overview10.1016/j.snb.2013.11.005 ↗
44. Influence of oxygen vacancies on the performance of SnO2 gas sensing by near-ambient pressure XPS studies10.1016/j.snb.2023.134252 ↗
45. Generation of oxygen vacancies in metal–organic framework-derived one-dimensional Ni0.4Fe2.6O4 nanorice heterojunctions for ppb-level diethylamine gas sensing
46. Oxygen vacancies engineering in thick semiconductor films via deep ultraviolet photoactivation for selective and sensitive gas sensing10.1002/aelm.202200905 ↗
47. Functionalization of mesoporous semiconductor metal oxides for gas sensing: recent advances and emerging challenges
48. Ultraselective acetone-gas sensor based ZnO flowers functionalized by Au nanoparticle loading on certain facet10.1016/j.snb.2019.02.095 ↗
49. Hierarchical mesoporous zinc oxide microspheres for ethanol gas sensor10.1016/j.snb.2021.131333 ↗
50. Mechanism for toluene detection of flower-like ZnO sensors prepared by hydrothermal approach: charge transfer10.1016/j.snb.2014.10.018 ↗
51. Perovskite-structured BiFeO3 nanoparticles with abundant oxygen vacancies for selective n-butanol gas sensing10.1021/acsanm.3c04754 ↗