journal article·2024-03

The effect of UVO treatment on TiO2-MAPbI3 heterostructure photodetector prepared in air atmosphere

Ye Yuan, Hong Tao, Haoning Wang, Jian Liu, Yameng Zhang, Qiuming Fu, Hongyang Zhao, Tingmin Di, Hao Long, Shuhua Yao

Publisher page

Abstract

TiO 2-MAPbI 3 heterostructure photodetectors were prepared in air atmosphere. The interface between electron transport layer and perovskite layer plays an important role in the performance of heterostructure photodetector. Here, ultraviolet ozone (UVO) treatment was used to improve the surface state of TiO 2 film and the interfacial carrier transport performance of perovskite heterostructure photodetector. UVO treatment made TiO 2 layer obtain the more oxygen vacancies and excess electrons, which were conducive to the electrical conductivity of electron transport layer. And MAPbI 3 film deposited on UVO-treated TiO 2 layer showed better uniformity and enhanced light absorption intensity due to the improved wettability of UVO-treated TiO 2 film. Further research on photoelectric performance indicated that the increased light current and decreased dark current could be obtained for perovskite photodetector based on UVO-treated TiO 2. In addition, the best exposure time was found to be 40 min. Compared with untreated sample, the detectivity of UVO-treated TiO 2-MAPbI 3 heterostructure photodetector increased by 80 %. Under 500 nm illumination with a light intensity of 1.6 mW cm −2 at −0.8 V bias, the responsivity, detectivity and external quantum efficiency of UVO-treated TiO 2-MAPbI 3 heterostructure photodetector reached 0.405 A W −1, 2.07 × 10 11 Jones and 100.5 %, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Ultrafast and broadband photodetectors based on a perovskite/organic bulk heterostructure for large-dynamic-range imaging10.1038/s41377-020-0264-5 ↗
2. Perovskite-based photodetectors: materials and devices10.1039/C6CS00896H ↗
3. Organic-inorganic hybrid lead halide perovskites for optoelectronic and electronic applications10.1039/C4CS00458B ↗
4. A review of perovskite-based photodetectors and their applications10.3390/nano12244390 ↗
5. Enhanced performance of perovskite photodetectors fabricated by two-step spin coating approach10.1016/j.mssp.2020.104916 ↗
6. Highly sensitive photodetector of Zn/Bi doped MAPbBr3 single crystals formed homojunction10.1016/j.mssp.2022.106824 ↗
7. Review on metal sulfide-based nanostructures for photodetectors: from ultraviolet to infrared regions
8. A review on device architecture engineering on various 2-D materials toward high-performance photodetectors
9. Recent advances in development of nanostructured photodetectors from ultraviolet to infrared region: a review
10. Depleted hole conductor-free lead halide iodide heterostructure solar cells10.1039/c3ee42282h ↗
11. Recent progress in perovskite-based photodetectors: the design of materials and structures
12. TiO2 electron transport bilayer for all-inorganic perovskite photodetectors with remarkably improved UV stability toward imaging applications10.1016/j.jmst.2020.10.028 ↗
13. A direct correlation between structural and morphological defects of TiO2 thin films on FTO substrates and photovoltaic performance of planar perovskite solar cells10.1016/j.mssp.2023.107452 ↗
14. Removal of surface oxygen vacancies increases conductance through TiO2 thin films for perovskite solar cells10.1021/acs.jpcc.9b02371 ↗
15. Enhanced effect of 1,2-dichlorobenzene on the property of PC61BM and perovskite films for planar heterostructure perovskite solar cells10.1016/j.orgel.2019.105543 ↗
16. Enhanced performance of perovskite solar cells by ultraviolet-ozone treatment of mesoporous TiO210.1016/j.apsusc.2017.12.085 ↗
17. TiO2 modification with multi-acid treatment for efficient interfacial perovskite-TiO2 electron transport10.1016/j.jallcom.2021.162837 ↗
18. Interface modification by formamidine acetate for efficient perovskite solar cells10.1016/j.solener.2022.01.002 ↗
19. Bifunctional passivation through fluoride treatment for highly efficient and stable perovskite solar cells10.1002/aenm.202200945 ↗
20. Enhanced planar perovskite solar cell performance via contact passivation of TiO2/perovskite interface with NaCl doping approach10.1021/acsaem.8b00602 ↗
21. Comparing the planar and porous Nb-doped TiO2 photoanode of triple cation perovskite solar cells10.1016/j.mssp.2021.106259 ↗
22. Perovskite/TiO2 interface passivation using poly(vinylcarbazole) and fullerene for the photovoltaic conversion efficiency of 2110.1021/acsaem.9b00162 ↗
23. Low-temperature fabrication of perovskite solar cells using modified TiO2 electron transport layer10.1016/j.mssp.2021.106303 ↗
24. Dual interfacial modification to improve the performance of CsPbBr3 perovskite solar cells10.1016/j.mssp.2022.106450 ↗
25. Synthesis and characterization of titania prepared by using a photoassisted sol -gel method10.1021/la026600o ↗
26. High‐efficient flexible perovskite solar cells with low temperature TiO2 layer via UV/ozone photo‐annealing treatment
27. Effect of UV-ozone exposure on the dye-sensitized solar cells performance10.1016/j.solener.2020.07.064 ↗
28. Ultraviolet-ozone modification on TiO2 surface to promote both efficiency and stability of low-temperature planar perovskite solar cells10.1016/j.cej.2020.124731 ↗
29. Unconventional route to oxygen-vacancy-enabled highly efficient electron extraction and transport in perovskite solar cells10.1002/anie.201910471 ↗
30. Hydrogenated TiO2 nanotube arrays for supercapacitors10.1021/nl300173j ↗
31. Surface coverage enhancement of a mixed halide perovskite film by using an UV-ozone treatment10.3938/jkps.69.406 ↗
32. Efficient photodiode-type photodetectors with perovskite thin films derived from an MAPbI3 single-crystal precursor10.1039/D0TC00734J ↗
33. Enhanced UV photodetector performance in bi-layer TiO2/WO3 sputtered films10.1016/j.apsusc.2019.07.124 ↗
34. Maddaka Reddeppa, Adem Sreedhar, Improvement of UV photodetector properties of reactively sputtered TiO2−x flms through vacuum annealing10.1007/s10854-019-02434-2 ↗
35. Influence of oxygen partial pressure on the performance of MoO3-based ultraviolet photodetectors
36. Theoretical study on transport-scheme conversion of g-C3N4/TiO2 heterojunctions by oxygen vacancies10.1016/j.apsusc.2020.147318 ↗
37. Hybrid organic-inorganic perovskite photodetectors10.1002/smll.201702107 ↗
38. A high-performance, self-powered photodetectors based on perovskite and graphene10.1021/acsami.7b14110 ↗
39. Fabrication and characterization of mesoscopic perovskite photodiodes10.1109/TNANO.2016.2517239 ↗
40. High-performance photodetector based on a graphene quantum dot/CH3NH3PbI3 perovskite hybrid10.1021/acsaelm.9b00705 ↗
41. Reconfigurable self-powered imaging photodetectors by reassembling and disassembling ZnO/perovskite heterostructures10.1039/D2TC01419J ↗
42. Self-powered perovskite/CdS heterostructure photodetectors10.1021/acsami.9b11835 ↗
43. Organohalide lead perovskite based photodetectors with much enhanced performance10.1039/C4CC05960C ↗
44. Ultrathin TiO2 nanosheets synthesized using a high pressure solvothermal method and the enhanced photoresponse performance of CH3NH3PbI3–TiO2 composite films10.1039/C7RA01073G ↗