Comparison of one and two-stage growth approaches for close space sublimation deposition of Sb2Se3 thin film solar cells
Source abstract
Abstract
In this work, we investigate the impact of grain structure and ribbon orientation on Sb2Se3 solar cells deposited by close space sublimation (CSS). Films of Sb2Se3 were produced using either a single-stage low-temperature “seed-layer” deposition, a high-temperature “growth-layer” deposition, or a combined two-stage deposition process combining both “seed” and “growth” layers. This study demonstrates the essential nature of the “seed” layer to achieve the required substrate coverage and ensure functioning Sb2Se3 solar cells by this technique. A photovoltaic efficiency of 5.07 % was obtained by fabricating solar cells with a two-stage Sb2Se3 growth process using the structure (FTO/TiO2/Sb2Se3/P3HT/Au) in superstrate configuration. Comparisons were made between device performance and ribbon orientation assessed by XRD measurements via a ribbon carrier transport (RCT) analysis method, as well as with surface coverage and grain size. The addition of a second growth stage was found to result in a more vertical ribbon orientation compared to a single low temperature deposition, however predominantly controls the overall surface coverage. We observe no obvious links between the orientation of ribbons and the cell performance. Instead we propose that the performance, and in particular the device VOC, is more strongly determined by the overall grain structure rather than simply by the ribbon orientation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Antimony selenide thin-film solar cells10.1088/0268-1242/31/6/063001 ↗
2. J. Cu 2 ZnSn (S, Se) 4 thin film solar cells fabricated with benign solvents10.1007/s12200-015-0539-2 ↗
3. Progress and perspectives of thin film kesterite photovoltaic technology: a critical review10.1002/adma.201806692 ↗
4. Direct observation of Cu, Zn cation disorder in Cu2ZnSnS4solar cell absorber material using aberration corrected scanning transmission electron microscopy10.1002/pip.2279 ↗
5. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics10.1007/s12200-017-0702-z ↗
6. Preparation and characterization of electrodeposited Sb2Se3 thin films from non-aqueous media10.1016/S0022-3697(02)00167-1 ↗
7. Growth and characterization of Sb2Se3 thin films for solar cells10.1016/j.solener.2018.07.082 ↗
8. Solution-processed antimony selenide heterojunction solar cells10.1002/aenm.201301846 ↗
9. Regulating deposition kinetics via a novel additive-assisted chemical bath deposition technology enables fabrication of 10.57%-efficiency Sb2Se3 solar cells10.1039/D2EE02261C ↗
10. Lone pair driven anisotropy in antimony chalcogenide semiconductors10.1039/D1CP05373F ↗
11. Current enhancement via a TiO2 window layer for CSS Sb2Se3 solar cells: performance limits and high Voc10.1109/JPHOTOV.2018.2885836 ↗
12. Review of recent progress in antimony chalcogenide-based solar cells: materials and devices10.1002/solr.201900026 ↗
13. 6.6% efficient antimony selenide solar cells using grain structure control and an organic contact layer10.1016/j.solmat.2018.09.004 ↗
14. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
15. Phase transformation of As2Se3 and Sb2Se3 films10.1063/1.1709063 ↗
16. Protocols for the Miller indexing of Sb2Se3 and a non-x-ray method of orienting its single crystals10.1016/j.mssp.2021.105691 ↗
17. P3HT as a pinhole blocking back contact for CdTe thin film solar cells10.1016/j.solmat.2017.07.005 ↗
18. Enhanced efficiency and stability in Sb2S3 seed layer buffered Sb2Se3 solar cells10.1002/admi.202200547 ↗
19. Heterostructured CdS buffer layer for Sb2Se3 thin film solar cell10.1002/solr.202300417 ↗
20. Role of the substrates in the ribbon orientation of Sb2Se3 films grown by Low-Temperature Pulsed Electron Deposition10.1016/j.solmat.2020.110724 ↗
21. Screening and optimization of processing temperature for Sb2Se3 thin film growth protocol: interrelation between grain structure, interface intermixing and solar cell performance10.1016/j.solmat.2021.111045 ↗
22. Evidence for self-healing benign grain boundaries and a highly defective Sb2Se3–CdS interfacial layer in Sb2Se3 thin-film photovoltaics10.1021/acsami.0c03690 ↗
23. What Can ${\mathrm{Sb}}2{\mathrm{Se}}3$ Solar Cells Learn from $\mathrm{Cd}\mathrm{Te10.1103/PRXEnergy.2.041001 ↗
24. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
25. Multi-phase sputtered TiO2-induced current–voltage distortion in Sb2Se3 solar cells10.1002/admi.202300238 ↗
26. Interrelation of the CdTe grain size, postgrowth processing, and window layer selection on solar cell performance10.1021/acsami.2c07609 ↗
27. Quantitative measurement of preferred orientation in rolled uranium bars10.1080/14786440108520972 ↗
28. Fundamental structure forming phenomena of polycrystalline films and the structure zone models10.1016/S0040-6090(97)00503-8 ↗
29. CdTe thin film solar cells: interrelation of nucleation, structure, and performance10.1016/j.tsf.2008.10.075 ↗
30. Control of grain size in sublimation-grown CdTe, and the improvement in performance of devices with systematically increased grain size10.1016/j.solmat.2010.02.034 ↗
31. Growth mechanism of Sb2Se3 thin films for photovoltaic application by vapor transport deposition10.1016/j.solmat.2019.04.024 ↗
32. How oxygen exposure improves the back contact and performance of antimony selenide solar cells10.1021/acsami.0c14256 ↗