Energy storage performance of lead-free Ba0.7Sr0.3TiO3 ceramics with doping Bi(Mg0.5Ti0.5)O3
Source abstract
Abstract
Despite extensive research into lead-free ceramics to achieve excellent dielectric properties and good energy storage performance, the primary challenge of low energy density remains unresolved. Here, a relaxor ferroelectric (1- x)Ba 0.7Sr 0.3TiO 3- xBi(Mg 0.5Ti 0.5)O 3 [(1- x)BST- xBMT] was designed and prepared using a solid-state method, where x = 0.05, 0.15, 0.20, 0.25. It revealed that the introduction of BMT reduces the average grain size, resulting in a decrease and broadening of the dielectric constant peaks. This modification enhanced the breakdown field strength ( E b ) of BST ceramics. An effective energy storage density of 2.44 J/cm³ and an energy storage efficiency of 76.25 % ware achieved in 0.80BST-0.20BMT ceramic at an electric field of 300 kV/cm. Furthermore, the recoverable energy density and energy efficiency of the 0.80BST-0.20BMT ceramic exhibited excellent frequency stability over a frequency from 5 Hz to 500 Hz. A power density ( P D∼16.06 MW/cm³) and a short discharge time ( t 0.9∼0.95 μs) were demonstrated in 0.80BST-0.20BMT ceramic at 200 kV/cm.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Electrical and optical properties of lanthanum oxide doped potassium sodium niobate ceramics10.15541/jim20210297 ↗
2. Enhanced energy density and thermal stability in relaxor ferroelectric Bi0.5Na0.5TiO3-Sr0.7Bi0.2TiO3 ceramics10.1016/j.jeurceramsoc.2019.07.003 ↗
3. Bi0.5Na0.5TiO3-based relaxor ferroelectric ceramic with large energy density and high efficiency under a moderate electric field10.1039/C9TC03597D ↗
4. High energy storage and thermal stability under low electric field in Bi0.5Na0.5TiO3 modified BaTiO3-Bi(Zn0.25Ta0.5)O3 ceramics10.1016/j.cej.2022.136505 ↗
5. Synergistic enhanced energy storage performance of NBT-KBT ceramics by K0.5Na0.5NbO3 composition design10.1016/j.jallcom.2023.169725 ↗
6. A strategy for high performance of energy storage and transparency in KNN-based ferroelectric ceramics10.1016/j.cej.2021.131959 ↗
7. High energy storage properties for BiMg0.5Ti0.5O3-modified KNN ceramics under low electric fields10.1007/s10853-022-07636-4 ↗
8. Enhanced energy storage and fast charge–discharge capability in Ca0.5Sr0.5TiO3–based linear dielectric ceramic10.1016/j.jallcom.2019.152695 ↗
9. Ultrahigh energy-storage density in NaNbO3-based lead-free relaxor antiferroelectric ceramics with nanoscale domains10.1002/adfm.201903877 ↗
10. Enhanced energy storage properties of Sr(Sc0.5Nb0.5)O3 modified (Bi0.47La0.03Na0.5)0.94Ba0.06TiO3 lead-free ceramics10.1007/s10853-020-04978-9 ↗
11. Sodium bismuth titanate-based perovskite ceramics with high energy storage efficiency and discharge performance10.1016/j.jmat.2022.02.003 ↗
12. Improved energy storage density and efficiency of (1-x)Ba0.85Ca0.15Zr0.1Ti0.9O3-xBiMg2/3Nb1/3O3 lead-free ceramics10.1016/j.cej.2020.128341 ↗
13. A-site compositional modulation in barium titanate based relaxor ceramics to achieve simultaneously high energy density and efficiency10.1016/j.jeurceramsoc.2021.05.052 ↗
14. Significant improvement in energy storage for BT ceramics via NBT composition regulation10.1016/j.jallcom.2023.172255 ↗
15. Energy storage performance of SrSc0.5Nb0.5O3 modified (Bi, Na)TiO3-based ceramic under low electric fields10.1111/jace.18921 ↗
16. Design of KNN-BZT ceramic with high energy storage properties and transmittance under low electric fields10.1021/acsomega.2c07646 ↗
17. Optimization the energy density and efficiency of BaTiO3-based ceramics for capacitor applications10.1016/j.cej.2020.127375 ↗
18. Effective strategy to achieve excellent energy storage properties in lead-free BaTiO3-based bulk ceramics10.1021/acsami.0c02832 ↗
19. Enhanced energy storage properties and stability of Sr(Sc0.5Nb0.5)O3 modified 0.65BaTiO3-0.35Bi0.5Na0.5TiO3 ceramics10.1016/j.cej.2020.125520 ↗
20. Improvement of dielectric and energy storage properties in Sr0.85Bi0.1ZrO3 modified (Bi0.5Na0.5)0.7Sr0.3TiO3 lead-free ceramics10.1016/j.jallcom.2022.164577 ↗
21. Novel BaTiO3-based, Ag/Pd-compatible lead-free relaxors with superior energy storage performance10.1021/acsami.0c13057 ↗
22. Effect of SiO2 additive on dielectric response and energy storage performance of Ba0.4Sr0.6TiO3 ceramics10.1016/j.ceramint.2016.04.169 ↗
23. Glass modified barium strontium titanate ceramics for energy storage capacitor at elevated temperatures10.1016/j.jmat.2019.06.003 ↗
24. Defect dipoles induced high-energy storage density in Mn-doped BST ceramics prepared by spark plasma sintering10.1111/jace.16088 ↗
25. Effective strategy to improve energy storage properties in lead-free (Ba0.8Sr0.2)TiO3-Bi(Mg0.5Zr0.5)O3 relaxor ferroelectric ceramics10.1016/j.cej.2022.137389 ↗
26. Achieve ultrahigh energy storage performance in BaTiO3-Bi(Mg1/2Ti1/2)O3 relaxor ferroelectric ceramics via nano-scale polarization mismatch and reconstruction10.1016/j.nanoen.2019.104264 ↗
27. Simultaneously achieving ultrahigh energy storage density and energy efficiency in barium titanate based ceramics10.1016/j.ceramint.2019.09.265 ↗
28. Enhanced photoelectric properties for BiZn0.5Zr0.5O3 modified KNN based lead-free ceramics10.1016/j.jallcom.2023.170639 ↗
29. Phase evolution, microstructure, electric properties of (Ba1-xBi0.67xNa0.33x)(Ti1-xBi0.33xSn0.67x)O3 ceramics10.1007/s40145-019-0326-4 ↗
30. High relative permittivity, low dielectric loss and good thermal stability of BaTiO3-bi(Mg0.5Zr0.5)O3 solid solution
31. Significantly enhanced energy density and breakdown strength of polymer nanocomposites using highly textured [111]c BaTiO3 platelets10.1016/j.jallcom.2021.161324 ↗
32. Quantifying the improvement in dielectric properties of BaSrTiO3-based ceramics by adding MgO10.3390/ma15082875 ↗
33. Thermally stable BaTiO3-Bi(Zn0.75W0.25)O3 solid solution with high relative permittivity and low dielectric loss10.1007/s10854-014-2555-1 ↗
34. Enhanced energy storage properties of Sr(Ti0.5Zr0.5)O3 modified (Na0.5Bi0.5)TiO3 ceramics10.1002/er.7897 ↗
35. Electrical properties of antimony doped barium titanate ceramics10.1016/j.materresbull.2013.05.103 ↗
36. Enhanced breakdown strength and energy storage density in a new BiFeO3-based ternary lead-free relaxor ferroelectric ceramic10.1016/j.jeurceramsoc.2019.03.001 ↗
37. Local structure and piezoelectric instability in lead-free (1-x)BaTiO3-xA(Cu1/3Nb2/3)O3 (A = Sr, Ca, Ba) solid solutions10.1039/C3RA44886J ↗
38. Electrostrictive and relaxor ferroelectric behavior in BiAlO3-modified BaTiO3 lead-free ceramics10.1063/1.4794022 ↗
39. Multilayer ceramic capacitors based on relaxor BaTiO3-Bi(Zn1/2Ti1/2)O3 for temperature stable and high energy density capacitor applications10.1063/1.4922947 ↗
40. Energy storage properties in Ba0.4Sr0.6TiO3 ceramics with addition of semi-conductive BO-B2O3-SiO2-Na2CO3-K2CO3 glass10.1016/j.jallcom.2014.08.038 ↗