journal article·2023-12

S-doped BaTiO3 to regulate photovoltaic properties

Jinyu Tang, Jianpei Wang, Ping Yang

Publisher page

Abstract

We performed a numerical evaluation on the electronic and optical properties of BaTiO 3 with different S doping modes by using first-principles approach. It was found that S replacement of O in BaTiO 3 has both apical and equatorial positions, i.e., replacing O in the polarized direction and replacing O in the unpolarized direction and that S doping in both positions in BaTiO 3 reduces the band gap. Specifically, replacing O in the apical and equatorial positions reduces the band gap from the original undoped 2.27 eV–1.41 eV and 1.65 eV, respectively. Moreover, S substitution in the apical direction possesses a lower energy bandgap, greater polarization strength, and higher absorption coefficient in the visible range. We concluded that O in the apical direction of BaTiO 3 is the best position for S substitution. The result showed that the band gap of BaTiO 3-xS x can also be adjusted by varying the amount of S doping. It implies that the potential of S-doped BaTiO 3 for ferroelectric photovoltaic applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Multiferroics and related materials · Ferroelectric and Piezoelectric Materials · Ga2O3 and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Ferroelectric photovoltaic materials and devices10.1002/adfm.202109625 ↗
2. Photovoltaics with ferroelectrics: current status and beyond10.1002/adma.201505215 ↗
3. First-principles calculation of the bulk photovoltaic effect in CH3NH3PbI3 and CH3NH3PbI3-xClx10.1021/jz502109e ↗
4. Tabulated values of the Shockley-Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
5. Optical band gap shift in thin LiNbO3 films grown by radio-frequency magnetron sputtering10.1016/j.ceramint.2017.07.064 ↗
6. Dielectric and optical properties of melt-grown BaTiO310.1016/0022-3697(68)90164-9 ↗
7. Superior ferroelectric photovoltaic properties in Fe-modified (Pb, La)(Zr, Ti) O3 thin film by improving the remnant polarization and reducing the band gap10.1016/j.ceramint.2020.03.040 ↗
8. Giant optical absorption and ferroelectric polarization of BiCoO 2 S perovskite oxysulfide by first principles prediction10.1039/D0CP00057D ↗
9. Band engineering of SrTiO3: effect of synthetic technique and site occupancy of doped rhodium10.1021/acs.jpcc.8b10083 ↗
10. Vanadium doped CaTiO 3 cuboids: role of vanadium in improving the photocatalytic activity10.1039/D1NA00468A ↗
11. First-principles study of the electronic and optical properties of Li(Nb,Os)O-3 alloys10.1063/1.5020308 ↗
12. Bandgap tuning of multiferroic oxide solar cells10.1038/nphoton.2014.255 ↗
13. Density functional theory study of hypothetical PbTiO3-based oxysulfides10.1103/PhysRevB.89.195202 ↗
14. Compositional dependence of dielectric and ferroelectric properties in BiFeO3–BaTiO3 solid solutions10.1016/j.ceramint.2013.09.020 ↗
15. Leontsev, S. O.; Eitel, R. E., Dielectric and Piezoelectric Properties in Mn‐modified (1−.
16. BiFeO3–xBaTiO3 ceramics
17. Electronic structure engineering of BaTiO3 cuboctahedrons by doping copper to enhance the photocatalytic activity for environmental remediation10.1016/j.jallcom.2023.169600 ↗
18. Rhodium doping augments photocatalytic activity of barium titanate: effect of electronic structure engineering10.1039/D0NA00702A ↗
19. Vanadium-doped BaTiO3 as high performance thermoelectric material: role of electronic structure engineering
20. Doped BaTiO3 cuboctahedral nanoparticles: role of copper in photocatalytic degradation of dyes
21. Chalcogens doped BaTiO3 for visible light photocatalytic hydrogen production from water splitting10.1016/j.saa.2018.09.048 ↗
22. Improved thermodynamic stability and visible light absorption in Zr+ X codoped (X= S, Se and Te) BaTiO3 photocatalysts: a first-principles study
23. Barium titanate at the nanoscale: controlled synthesis and dielectric and ferroelectric properties10.1039/C8CS00583D ↗
24. Size effect on the crystal structure of barium titanate nanoparticles10.1063/1.1935132 ↗
25. Hydrostatic pressure mapping of barium titanate phase transitions with quenched FeRh10.1038/s41598-020-63358-0 ↗
26. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
27. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
28. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
29. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
30. First-principles calculations of the electronic structure and spectra of strongly correlated systems: the LDA+ U method10.1088/0953-8984/9/4/002 ↗
31. Linear response approach to the calculation of the effective interaction parameters in the LDA+ U method10.1103/PhysRevB.71.035105 ↗
32. First-principles study of BiFeO3 and BaTiO3 in tetragonal structure10.1142/S021797921950231X ↗
33. Theory of polarization of crystalline solids10.1103/PhysRevB.47.1651 ↗
34. A beginner's guide to the modern theory of polarization10.1016/j.jssc.2012.05.010 ↗
35. X-ray diffractometry for the structure determination of a submicrometre single powder grain10.1107/S090904950900675X ↗
36. Evaluation of thermodynamics, formation energetics and electronic properties of vacancy defects in CaZrO310.1038/s41598-017-08189-2 ↗
37. Density functional theory study of hypothetical PbTiO 3-based oxysulfides10.1103/PhysRevB.89.195202 ↗
38. Oxysulfides Ln(2)Ti(2)S(2)O(5) as stable photocatalysts for water oxidation and reduction under visible-light irradiation10.1021/jp036890x ↗
39. High-spin Cobalt(II) ions in square planar Coordination: structures and magnetism of the oxysulfides Sr2CoO2Cu2S2 and Ba2CoO2Cu2S2 and their solid solution10.1021/ja109553u ↗
40. Electrical behavior of barium titanatge single crystals at low temperatures10.1103/PhysRev.99.1161 ↗
41. An electron localization function study of the geometry of d0 molecules of the period 4 metals Ca to Mn10.1021/ic0354015 ↗
42. First-principles design and analysis of an efficient, Pb-free ferroelectric photovoltaic absorber derived from ZnSnO310.1021/acs.chemmater.5b01601 ↗
43. Electrical polarization and orbital magnetization: the modern theories10.1088/0953-8984/22/12/123201 ↗
44. DFT study of the polarization behaviors of various distorted barium titanate crystals: the role of atomic displacements10.1016/j.physb.2018.03.032 ↗
45. Crystal structures and elastic properties of superhard Ir N 2 and Ir N 3 from first principles
46. Necessary and sufficient elastic stability conditions in various crystal systems10.1103/PhysRevB.90.224104 ↗
47. Oxysulfides Ln2Ti2S2O5 as stable photocatalysts for water oxidation and reduction under visible-light irradiation10.1021/jp036890x ↗
48. The bandgap of sulfur-doped Ag 2 O nanoparticles[J]10.1039/D2CP05236A ↗
49. Synergistic effect of Ni doping and oxygen vacancies on the visible light photocatalytic properties of Ag2O nanoparticles[J]10.1016/j.jpcs.2022.110733 ↗
50. Cd-doped Ag 2 O/BiVO 4 visible light Z-scheme photocatalyst for efficient ciprofloxacin degradation[J]10.1039/D2RA07200A ↗
51. A pathway for ZnO p-type transformation and its performance in solar cells10.1016/j.solener.2021.11.061 ↗
52. Photoelectric properties of 2D ZnO, graphene, silicene materials and their heterostructures10.1016/j.compositesb.2022.109645 ↗