journal article·2022-06

Sensitivity of polarized laser scattering detection to subsurface damage in ground silicon wafers

Jingfei Yin, Qian Bai, Bi Zhang

Publisher page

Abstract

Silicon is the primary substrate material in the semiconductor industry. Since surface integrity of a silicon wafer is crucial to the performance of an IC chip made of the wafer, the subsurface damage (SSD) induced by machining to a silicon wafer has been intensively investigated. However, detecting SSD is a challenge due to a lack of an effective method. This study presents a novel method, the polarized laser scattering (PLS) method, for detecting SSD in ground silicon wafers. A PLS system is established to detect the grinding-induced SSD which is also evaluated by the destructive methods. The study shows that the PLS signal is sensitive to the SSD depth with a detection resolution of approximately 0.1 μm. In addition, the detectability of the PLS method is demonstrated and a relationship between the PLS signal and SSD depth is established to facilitate the practical applications of the PLS method.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. In-plane and out-of-plane structural response of spiral interconnects for highly stretchable electronics10.1063/1.5031176 ↗
2. Stretchable and foldable silicon-based electronics10.1063/1.4979545 ↗
3. A study on the damage layer removal of single-crystal silicon wafer after atmospheric-pressure plasma etching10.1115/1.4046377 ↗
4. Investigation on critical crack-free cutting depth for single crystal silicon slicing with fixed abrasive wire saw based on the scratching machining experiments10.1016/j.mssp.2017.10.027 ↗
5. Formation of subsurface cracks in silicon wafers by grinding10.1016/j.npe.2018.09.003 ↗
6. The effect of cut depth and distribution for abrasives on wafer surface morphology in diamond wire sawing of PV polycrystalline silicon10.1016/j.mssp.2018.12.004 ↗
7. Material removal and surface generation mechanisms in diamond wire sawing of silicon crystal10.1016/j.mssp.2019.104642 ↗
8. An analytical model to predict the depth of sub-surface damage for grinding of brittle materials10.1016/j.cirpj.2021.03.019 ↗
9. Mechanical properties of silicon in subsurface damage layer from nano-grinding studied by atomistic simulation10.1063/1.5021654 ↗
10. Methods for detection of subsurface damage: a review10.1186/s10033-018-0229-2 ↗
11. Cup wheel grinding-induced subsurface damage in optical glass BK7: an experimental, theoretical and numerical investigation10.1016/j.precisioneng.2019.04.003 ↗
12. Evaluation of grinding-induced subsurface damage in optical glass BK710.1016/j.jmatprotec.2015.11.003 ↗
13. A load identification method for the grinding damage induced stress (GDIS) distribution in silicon wafers10.1016/j.ijmachtools.2016.04.010 ↗
14. Nanoscale ultrasonic subsurface imaging with atomic force microscopy10.1063/5.0019042 ↗
15. Investigation of some low ultrasonic absorption liquids10.1121/1.380827 ↗
16. 6 - acoustic microscopy for materials characterization
17. Study on the subsurface damage depth in machined silicon wafers by the laser-ultrasonic method10.1016/j.csndt.2014.03.002 ↗
18. Fixed abrasive diamond wire saw slicing of single-crystal silicon carbide wafers10.1081/AMP-120029960 ↗
19. Observation of microstructure and damage in materials by phase sensitive radiography and tomography10.1063/1.364374 ↗
20. Rotational grinding of silicon wafers−sub-surface damage inspection10.1016/j.mseb.2003.12.008 ↗
21. Determination of stress in silicon wafers using Raman spectroscopy
22. Detection and analysis of crystal defects in silicon by scanning infrared depolarization and photoluminescence heterodyne techniques10.1016/S0921-5107(01)00965-5 ↗
23. Quantitative measurement of subsurface damage with self-referenced spectral domain optical coherence tomography10.1364/OME.7.003919 ↗
24. Imaging subsurface damage of grinded fused silica optics by confocal fluorescence microscopy10.1364/OE.17.003543 ↗
25. Uncertainty analysis for the coefficient of band-to-band absorption of crystalline silicon10.1063/1.4923379 ↗
26. Evaluating subsurface damage in optical glasses10.1051/jeos.2011.11001 ↗
27. Liao · 1995
28. Subsurface damage measurement in silicon wafers with cross-polarisation confocal microscopy10.1504/IJNM.2006.012198 ↗
29. Subsurface damage detection on ground silicon wafers using polarized laser scattering10.1115/1.4044417 ↗
30. Two-dimensional detection of subsurface damage in silicon wafers with polarized laser scattering10.1016/j.jmatprotec.2020.116746 ↗
31. Fine grinding of silicon wafers10.1016/S0890-6955(00)00101-2 ↗
32. Evaluation of subsurface damage by light scattering techniques10.1364/AO.52.006579 ↗
33. Residual stress distribution in silicon wafers machined by rotational grinding10.1115/1.4036125 ↗
34. Residual stress analysis on silicon wafer surface layers induced by ultra-precision grinding10.1007/s12598-011-0383-5 ↗
35. Generation and distribution of residual stress during nano-grinding of monocrystalline silicon10.7567/JJAP.57.121302 ↗