The effect of the electrolyte concentration on the charge transfer at the electrolyte/silicon-carbon interface: Electrochemical impedance spectrometry study
Source abstract
Abstract
Abstract Silicon-carbon films were synthesized by electrochemical deposition from methanol/ethanol and hexamethyldisilazane solution. SEM studies have shown that samples with manganese and those obtained from the methanol-based electrolyte are distinguished by the presence of three-dimensional agglomerates on the surface, while the morphology of films obtained from ethanol-based solution is more uniform. Raman studies confirm the formation of silicon-carbon bonds and the effect of manganese addition on the film structure. Electrochemical behavior was studied using the Mott-Schottky analysis. The plots of all samples contain linear sections with both positive and negative slopes, which indicates n-type and p-type semiconductor behavior The highest charge carrier density was found in the “pure” silicon-carbon films obtained from the methanol-based solution. The Bode plots showed a mix of resistive and capacitive behavior and they do not change much with the type of the sample and electrolyte concentration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrochemical Analysis and Applications · Silicon Nanostructures and Photoluminescence · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A porous SiC ammonia sensor10.1016/j.snb.2005.03.067 ↗
2. SiC-based MIS gas sensor for high water vapor environments10.1016/j.snb.2011.12.032 ↗
3. Interdispersed silicon–carbon nanocomposites and their application as anode materials for lithium-ion batteries10.1016/j.elecom.2012.11.032 ↗
4. Solution blown silicon carbide porous nanofiber membrane as electrode materials for supercapacitors10.1016/j.electacta.2016.05.003 ↗
5. Carbon-rich amorphous silicon carbide and silicon carbonitride films for silicon-based photoelectric devices and optical elements: application from UV to mid-IR spectral range10.1016/j.optmat.2020.109959 ↗
6. First-principles investigations of the effect of V and Fe dopants on the magnetic and optical properties of 4H-SiC10.1016/j.tsf.2020.138182 ↗
7. Synthesis of silicon carbide nitride nanocomposite films by a simple electrochemical method10.1016/j.elecom.2006.03.005 ↗
8. Preparation of Ni-W/SiC nanocomposite coatings by electrochemical deposition10.1016/j.jallcom.2017.01.239 ↗
9. Electrochemical deposition of silicon-carbon films: a study on the nucleation and growth mechanism10.3390/nano9121754 ↗
10. The two-stage electrochemical deposition of a manganese-doped silicon-carbon film onto the silicon (100) substrate10.1088/1742-6596/1410/1/012027 ↗
11. Fabrication of gas-sensor chips based on silicon–carbon films obtained by electrochemical deposition10.3390/chemosensors7040052 ↗
12. Electropolymerization of 9-carbazole acetic acid in room temperature ionic liquid-acetonitrile mixture: morphology, capacitance, and Mott–Schottky analysis10.1149/2.1011608jes ↗
13. Determination of carrier densities of boron- and nitrogen-doped multiwalled carbon nanotubes using Mott–Schottky plots10.1149/1.3111032 ↗
14. Mott-Schottky analysis of nanoporous semiconductor electrodes in dielectric state deposited on SnO2(F) conducting substrates10.1149/1.1568741 ↗
15. Characteristics of P-NiO thin films prepared by spray pyrolysis and their application in CdS-sensitized photocathodes10.1149/1.3590742 ↗
16. P- and n-type doping of zinc oxide through electrochemical methods
17. Electrochemical properties of Al doped polypyrrole composite polymer: Mott-Schottky approximation and density functional theory10.1149/2.0491908jes ↗
18. Reproducible electrochemical analysis of nanostructured Cu2O using a non-aqueous 3-methoxypropionitrile-based electrolyte10.1016/j.elecom.2017.11.005 ↗
19. Electrochemical corrosion behavior of duplex stainless SteelAISI 2205 in ethylene glycol-water mixture in the presence of50 W/V % LiBr10.33961/JECST.2016.7.1.58 ↗
20. A comparative study of the Mott-Schottky behavior of oxide films on stainless steels in ionic liquids and in aqueous solutions
21. Mott-Schottky analysis of passive films on Si containing stainless steel alloys10.1149/2.083111jes ↗
22. Area effects on the Mott-Schottky behavior of anodic films formed on AISI 304 stainless steel
23. Rediscovering Mott-Schottky plots: a knee-point in the plot for passive films on chromium10.1149/2.1691704jes ↗
24. A critical assessment of the Mott-Schottky analysis for the characterisation of passive film-electrolyte junctions10.1134/S102319351011011X ↗
25. The amorphous semiconductor Schottky barrier approach to study the electronic properties of anodic films on Ti10.1149/2.0551709jes ↗
26. Electrolytes in metal oxide supercapacitors
27. Electrolyte selection for supercapacitive devices: a critical review10.1039/C9NA00374F ↗
28. The electrochemical deposition of silicon - carbon thin films from organic solution10.1088/1742-6596/1124/8/081043 ↗
29. Raman spectroscopy on amorphous carbon films10.1063/1.362745 ↗
30. Surface modification of silicon carbide nanoparticles by azo radical initiators10.1021/jp709608p ↗
31. CsPbBrCl2/g-C3N4 type II heterojunction as efficient visible range photocatalyst10.1016/j.jhazmat.2019.120855 ↗
32. Nickel doped graphitic carbon nitride nanosheets and its application for dye degradation by chemical catalysis10.1016/j.materresbull.2018.02.004 ↗
33. Photoelectrochemical properties of single‐crystalline n ‐ SiC in aqueous electrolytes10.1149/1.2116023 ↗
34. Effect of nickel and manganese doping on the structure, morphology and the electrochemical performance of the silicon-carbon films
35. Impedance spectroscopic studies of the porous structure of electrodes containing graphite materials with different particle size and shap10.1016/j.electacta.2016.01.121 ↗
36. Semiconductor-to-Metal-like behavior of Si with dopant concentration—an electrochemical investigation and illustration with surface hydride formation and hydrogen evolution reaction
37. Electrode design for MnO2-based aqueous electrochemical capacitors: influence of porosity and mass loading10.3390/ma14112990 ↗