Defect passivation with bromine template for efficient perovskite solar cells
Source abstract
Abstract
Interfacial modification is an effective method to improve the performance of perovskite solar cells (PSCs). However, defects in SnO 2 itself and interfacial defects with perovskite (PVK) lead to the limited performance of PSCs. In this study, 3, 5-dibromobenzoic acid (3,5-DBBA) material was added at the interface between electron transport layer (ETL)and perovskite absorption layer. It was found that Br in 3,5-DBBA can passivate the oxygen vacancies and uncoordinated Sn 4+ defects in SnO 2, and optimize the interface contact between ETL and perovskite film, inhibit the non-radiative recombination of charge carriers, and improve the carrier lifetime and extraction yield. Br is also able to interact with the perovskite lattice to passivate Pb 2+ defects and regulate the crystal growth of the perovskite. The open circuit voltage of perovskite solar cells was increased from 1.12 V to 1.16 V, and the power conversion efficiency was increased from 19.19 % to 22.27 %. The bromine templates strategy can also effectively improve the stability of PSCs. It provides a new strategy for realizing high performance perovskite solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. 2023
2. Efficient and stable perovskite solar cells with a high open-circuit voltage over 1.2 V achieved by a dual-side passivation layer10.1002/adma.202300754 ↗
3. Materials and methods for interface engineering toward stable and efficient perovskite solar cells10.1021/acsenergylett.0c01240 ↗
4. Advances in SnO2 for efficient and stable n–i–p perovskite solar cells10.1002/adma.202110438 ↗
5. Advances in perovskite solar cells10.1002/advs.201500324 ↗
6. Highly efficient and low hysteresis methylammonium-free perovskite solar cells based on multifunctional oteracil potassium interface modification10.1016/j.cej.2022.135671 ↗
7. A core@ dual–shell nanostructured SnO2 to modulate the buried interfaces toward stable perovskite solar cells with minimized energy losses
8. Chemical bath deposited SnO2 for high-efficiency perovskite solar cells on Ti substrates10.1016/j.mssp.2023.107604 ↗
9. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
10. 25.24%-efficiency FACsPbI3 perovskite solar cells enabled by intermolecular esterification reaction of DL-Carnitine hydrochloride10.1002/adma.202211545 ↗
11. Stabilizing buried interface via synergistic effect of fluorine and sulfonyl functional groups toward efficient and stable perovskite solar cells10.1007/s40820-022-00992-5 ↗
12. Chlorobenzenesulfonic potassium salts as the efficient multifunctional passivator for the buried interface in regular perovskite solar cells
13. A multifunctional molecular bridging layer for high efficiency, hysteresis-free, and stable perovskite solar cells10.1002/aenm.202301161 ↗
14. Buried interfaces in halide perovskite photovoltaics10.1002/adma.202006435 ↗
15. Effects of potassium treatment on SnO2 electron transport layers for improvements of perovskite solar cells10.1016/j.solener.2022.01.053 ↗
16. Synergy of mesoporous SnO2 and RbF modification for high-efficiency and stable perovskite solar cells10.1016/j.jechem.2021.08.014 ↗
17. Dual passivation of SnO2/Perovskite heterogeneous interfacial defects for efficient perovskite solar cells10.1016/j.solmat.2022.112088 ↗
18. A full range of defect passivation strategy targeting efficient and stable planar perovskite solar cells10.1016/j.cej.2022.138800 ↗
19. Thermally stable, planar hybrid perovskite solar cells with high efficiency10.1039/C8EE02242A ↗
20. Simultaneous contact and grain‐boundary passivation in planar perovskite solar cells using SnO2‐KCl composite electron transport layer10.1002/aenm.201903083 ↗
21. Pre‐Buried additive for cross‐layer modification in flexible perovskite solar cells with efficiency exceeding 2210.1002/adma.202109879 ↗
22. Modulating residual lead iodide via functionalized buried interface for efficient and stable perovskite solar cells10.1021/acsenergylett.2c02378 ↗
23. Dual passivation of perovskite and SnO2 for high‐efficiency MAPbI3 perovskite solar cells10.1002/advs.202001466 ↗
24. Heterogeneous lead iodide obtains perovskite solar cells with efficiency of 24.2710.1016/j.cej.2022.137676 ↗
25. Excess PbI2 evolution for triple-cation based perovskite solar cells with 21.9% efficiency10.1016/j.jechem.2021.07.030 ↗
26. SnO2: a wonderful electron transport layer for perovskite solar cells10.1002/smll.201801154 ↗
27. Pre‐buried ETL with bottom‐up strategy toward flexible perovskite solar cells with efficiency over 2310.1002/adfm.202214788 ↗
28. Orientation-controlled mesoporous PbI2 scaffold for 22.7% perovskite solar cells10.1007/s40843-022-2289-5 ↗
29. Unveiling facet-dependent degradation and facet engineering for stable perovskite solar cells10.1126/science.adf3349 ↗
30. Interfacial defect passivation and stress release by multifunctional KPF6 modification for planar perovskite solar cells with enhanced efficiency and stability10.1016/j.cej.2021.129375 ↗
31. Multifunctional polymer‐regulated SnO2 nanocrystals enhance interface contact for efficient and stable planar perovskite solar cells10.1002/adma.202003990 ↗
32. A synchronous defect passivation strategy for constructing high-performance and stable planar perovskite solar cells10.1016/j.cej.2020.127387 ↗
33. Double-layer synergistic optimization by functional black phosphorus quantum dots for high-efficiency and stable planar perovskite solar cells10.1016/j.nanoen.2021.106610 ↗
34. Simultaneous interfacial modification and crystallization control by biguanide hydrochloride for stable perovskite solar cells with PCE of 24.4
35. Self‐induced type‐i band alignment at surface grain boundaries for highly efficient and stable perovskite solar cells10.1002/adma.202103231 ↗
36. Stable 24.29%‐Efficiency FA0.85MA0. 15PbI3 perovskite solar cells enabled by methyl haloacetate‐lead dimer complex10.1002/aenm.202200867 ↗
37. Stable perovskite solar cells using tin acetylacetonate based electron transporting layers10.1039/C9EE00453J ↗
38. Stabilizing bottom side of perovskite via preburying cesium formate toward efficient and stable solar cells10.1002/adfm.202303742 ↗