Effect of excess Bi2O3/PbO on the structural and electrical properties of ternary 0.39Bi(Ni1/2Ti1/2)O3–0.20PbZrO3–0.41PbTiO3 ceramics
Source abstract
Abstract
The ternary 0.39Bi(Ni 1/2Ti 1/2)O 3–0.20PbZrO 3–0.41PbTiO 3:x(Bi 2O 3 /PbO) [x = 0, 1, and 2 wt%] ceramics were synthesized via solid-state sintering technique. The impact of excess addition on structural and electrical properties was investigated. PXRD results confirmed the diffusion of excess addition in the 0.39Bi(Ni 1/2Ti 1/2)O 3–0.20PbZrO 3–0.41PbTiO 3 (BNPZT) lattice, exhibiting the perovskite structure with major rhombohedral ( R3c) and minor tetragonal ( P4mm ) phases. The microstructure of the samples exhibits average grain size distribution (<8 μm). The temperature and frequency-dependent dielectric measurement revealed the relaxor-like ferroelectric behaviour and curie temperature ( T c ∼290 °C) observed in BNPZT:1 Pb ceramics. The improved remnant polarization ( P r ∼23.47 μC/cm 2) and coercive field ( E c ∼16. 13 kV/cm) were obtained in BNPZT:2 Pb ceramics. The enhanced piezoelectric charge coefficient ( d 33 ∼ 496 pC/N) and maximum strain ( S max ∼0.12 %) were obtained for BNPZT. The least asymmetric factor ( γ s ) illustrates the lower concentration of inherent defects in BNPZT:1(Bi/Pb) ceramics. This study provides insight into microstructural and electrical properties tuning and paves the way for designing piezoelectric materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Shin · 2015 · S686
2. Recent development in lead-free perovskite piezoelectric bulk materials10.1016/j.pmatsci.2018.06.002 ↗
3. Band gap, piezoelectricity and temperature dependence of differential permittivity and energy storage density of PZT with different Zr/Ti ratios10.1016/j.vacuum.2018.08.015 ↗
4. Relaxing with relaxors: a review of relaxor ferroelectrics10.1080/00018732.2011.555385 ↗
5. Facile preparation and performance of novel high-TC xBi(Ni1/2Ti1/2)O3-(1-x)Pb(Zr1/2Ti1/2)O3 piezoceramics10.1016/j.cap.2017.12.007 ↗
6. Enhanced thermal stability of lead-free high temperature 0.75BiFeO 3-0.25BaTiO3 ceramics with excess Bi content10.1016/j.jallcom.2013.11.169 ↗
7. Influence of excessive Pb and sintering temperature on the structure and properties of 0.39BS-0.61PT ceramics10.1016/j.ceramint.2021.07.098 ↗
8. Normal-relaxor-diffuse ferroelectric phase transition and electrical properties of Bi (Mg 1/2 Ti 1/2)3- PbZrO 3- PbTiO 3 solid solution ceramics near the morphotropic phase boundary10.1111/jace.12874 ↗
9. Morphotropic phase boundary in high temperature ferroelectric xBi(Zn 1/2Ti1/2)O3 - YPbZrO3 - zPbTiO 3 perovskite ternary solid solution10.1016/j.matlet.2011.01.070 ↗
10. Structure and enhanced piezoelectric response by chemical doping in PbTiO3-PbZrO3-Bi(Ni1/2Ti1/2)O 310.1016/j.inoche.2013.03.006 ↗
11. Temperature and pressure effects of multiferroic Bi2NiTiO6 compound10.1063/1.4801630 ↗
12. Local structural distortion and electrical transport properties of Bi(Ni1/2Ti1/2)O3 perovskite under high pressure10.1038/srep18229 ↗
13. Enhanced energy storage properties of Bi(Ni1/2Zr1/2)O3-modified BaTiO3-based ceramics10.1007/s10854-022-09501-1 ↗
14. Improved piezoelectric, thermal stability, and ferroelectric properties in ternary 0.39BNT–0.20PZ–0.41PT piezoceramics via low sintering temperature10.1007/s10854-023-10106-5 ↗
15. Effects of Bi excess on the structure and electrical properties of high-temperature BiFeO3-BaTiO3 piezoelectric ceramics10.1007/s10854-012-0996-y ↗
16. Origin of enhanced depolarization temperature in quenched Na0.5Bi0.5TiO3-BaTiO3 ceramics10.1016/j.jeurceramsoc.2020.02.039 ↗
17. Microstructural parameters from X-ray diffraction peak broadening10.1016/j.scriptamat.2004.05.007 ↗
18. Grain size effect on structure and electrical properties of lead-free Na0.4K0.1Bi0.5TiO3 ceramics10.1016/j.ceramint.2017.06.137 ↗
19. Development of PZN-PMN-PZT piezoelectric ceramics with high d33 and qm values
20. A comparative study on the structural, dielectric and multiferroic properties of Co0.6Cu0.3Zn0.1Fe2O4/Ba0.9Sr0.1Zr0.1Ti0.9O3 composite ceramics10.1016/j.compositesb.2018.12.010 ↗
21. Influence of core size on the multiferroic properties of CoFe2O4@BaTiO3 core shell structured composites10.1016/j.ceramint.2018.08.234 ↗
22. Enhancement of magnetoelectric properties of (1-x)Mn0.5Zn0.5Fe2O4- xBa0.85Sr0.15Ti0.9Hf0.1O3 composite ceramics10.1016/j.jallcom.2019.05.013 ↗
23. Frequency and temperature-dependence of dielectric permittivity and electric modulus studies of the solid solution Ca0.85Er0.1Ti1-: XCo4 x/3O3 (0 ≤ x ≤ 0.1)10.1039/C8RA00794B ↗
24. Effect of sintering temperature on (Ba0.85Ca0.15) (SnxZr0.1-xTi0.9)O3 for piezoelectric energy harvesting applications10.1016/j.ceramint.2021.01.175 ↗
25. Dielectric and piezoelectric properties of ⟨001⟩ fiber-textured 0.675 Pb(Mg1/3Nb2/3)O3-0.325 PbTiO3 ceramics10.1063/1.1554488 ↗
26. Microstructure, dielectric and piezoelectric properties of (Pb 1-xSrx)Nb1.96Ti0.05O6 ceramics10.1016/j.solidstatesciences.2014.06.013 ↗
27. Hardening in non-stoichiometric (1 − x)Bi0.5Na0.5TiO3–xBaTiO3 lead-free piezoelectric ceramics10.1007/s10853-015-9235-2 ↗
28. Structure and enhanced electrical properties of high-temperature BiFeO3-PbTiO3-BaZrO3 ceramics with bismuth excess10.1016/j.ceramint.2018.08.275 ↗
29. Effect of sintering temperature on dielectric, piezoelectric and ferroelectric properties of BZT-BCT 50/50 ceramics10.1016/j.jallcom.2012.08.017 ↗
30. Influence of long-range cation order on relaxor properties of doped Pb(Mg1/3Nb2/3)O3 ceramics10.1103/PhysRevB.79.144101 ↗
31. Ultrahigh energy storage characteristics of sodium niobate-based ceramics by introducing a local random field10.1021/acssuschemeng.0c05265 ↗
32. Effect of sintering temperature on structural, electrical, and ferroelectric properties of lanthanum and sodium co-substituted barium titanate ceramics10.1016/j.jallcom.2018.05.138 ↗
33. Effect of sintering temperature on internal-bias field and electric properties of 0.2PZN-0.8PZT ceramics
34. Optimizing electrical poling for tetragonal, lead-free BZT-BCT piezoceramic alloys10.1016/j.jeurceramsoc.2013.05.032 ↗
35. Effect of sintering temperature on composition, microstructure and electrical properties of K0.5Na0.5NbO3 ceramics10.1016/j.physb.2013.10.052 ↗
36. Influence of sintering temperature on electrical properties of modified-PZT piezoelectric ceramics
37. Investigation on the discharge energy storage density of the Rb substituted Na0.5Bi0.5TiO3 relaxor ferroelectric and its suitability for the orthopedic application10.1111/jace.16596 ↗
38. Changes in ferroelectric properties of barium titanate ceramic with compressive stress10.1088/0031-8949/2007/T129/046 ↗
39. Phase transition behavior and electrical properties of lead-free (Ba 1-xCax)(Zr0.1Ti0.9)O3 piezoelectric ceramics10.1063/1.4804173 ↗
40. Super-coercive electric field hysteresis in ferroelectric plastic crystal tetramethylammonium bromotrichloroferrate(iii)10.1039/C9TC06918F ↗
41. Effect of sintering temperature on the electrical properties of pristine BF-35BT piezoelectric ceramics10.1007/s43207-020-00039-8 ↗
42. Role of Bi chemical pressure on electrical properties of BiFeO3–BaTiO3–based ceramics10.1016/j.solidstatesciences.2021.106562 ↗
43. Ferroelectric and piezoelectric properties of BiFeO3-based piezoelectric ceramics
44. Fatigue of lead zirconate titanate ceramics. I: unipolar and DC loading10.1111/j.1551-2916.2007.01520.x ↗
45. Reduced dielectric loss and high piezoelectric constant in Ce and Mn co-doped BiScO3-PbCexTi1-xO3-Bi(Zn0.5Ti0.5)O3 ceramics10.1016/j.ceramint.2018.06.065 ↗
46. Effect of excess Bi2O3 on the electrical properties and microstructure of (Bi1/2Na1/2)TiO3 ceramics10.1007/s00339-003-2350-y ↗