journal article·2025-03

Effect of slurry and fixed abrasive pad on chemical mechanical polishing of SiC wafer

Lei He, Jun Li, Chao Tang, Hongyan Zhao, Daqing Zhou, Jialong Si, Liantong Yang

Publisher page

Abstract

Due to Silicon carbide (SiC) wafer favorable characteristics, including a wide bandgap, high thermal conductivity and a high breakdown field strength, it is widely utilized in the development of power semiconductor devices. Presently, the processing flow of SiC wafers consists of four steps: rough lapping, precision lapping, rough polishing and precision polishing, which is a complex and less efficient method. Fixed abrasive chemical mechanical polishing (FA-CMP) technology was employed for polishing of SiC wafers,to replace the conventional process of precision lapping and rough polishing in a single step. The benefits are simplified procedures, a reduction in polishing time and an increase in efficiency. The effect of additive type and concentration in the abrasive-free slurry, as well as abrasive size and concentration in the fixed abrasive pad (FAP), on the polishing outcome were investigated. The results indicated that the surface polished with ethylene glycol (EG) exhibited no discernible scratches and attained the optimal surface quality. As the concentration of ethylene glycol increased, the material removal rate (MRR) declined, while the surface roughness initially decreased and then increased. At a concentration of 4 vol%, the MRR was 13.1 μm/h, while the surface roughness Sa was 1.6 nm. Furthermore, both the MRR and surface roughness exhibited an inverse relationship with the abrasive size, whereas they demonstrated a direct correlation with the abrasive concentration. When the abrasive size was 3–5 μm and the concentration was 125 %, the surface quality of the polished SiC wafers was excellent and scratch-free, and the surface roughness Sa reached 1.13 nm, while the MRR was 7.4 μm/h. Therefore, SiC wafer FA-CMP will significantly increase the efficiency and improve the surface quality. Thus, the efficient and high-quality processing of SiC wafers will be achieved.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Advanced processing for mobility improvement in 4H-SiC MOSFETs: a review10.1016/j.mssp.2017.10.030 ↗
2. Research progress of large size SiC single crystal materials and devices10.1038/s41377-022-01037-7 ↗
3. Investigate on material removal of 3C-SiC crystals in nano-polishing via molecular dynamics10.1016/j.jmapro.2024.04.080 ↗
4. Surface micromorphology and nanostructures evolution in hybrid laser processes of slicing and polishing single crystal 4H-SiC10.1016/j.jmst.2023.09.046 ↗
5. A review of SiC IGBT: models, fabrications, characteristics, and applications10.1109/TPEL.2020.3005940 ↗
6. Controlling the Si/C ratio in SiC matrix based on the modified polymethysilane for C/C–SiC composites with enhanced mechanical properties10.26599/JAC.2024.9220843 ↗
7. A review on chemical and mechanical phenomena at the wafer interface during chemical mechanical planarization10.1557/s43578-020-00060-x ↗
8. Approaches to sustainability in chemical mechanical polishing (CMP): a review10.1007/s40684-021-00406-8 ↗
9. Recent developments and applications of chemical mechanical polishing10.1007/s00170-020-05740-w ↗
10. Surface engineering of SiC through nanogrinding and CMP10.4028/www.scientific.net/MSF.924.539 ↗
11. Experimental investigation on the ultrasonically assisted single-sided lapping of monocrystalline SiC substrate10.1016/j.jmapro.2019.06.008 ↗
12. Chemi-mechanical polishing of on-Axis semi-insulating SiC substrates10.4028/www.scientific.net/MSF.457-460.805 ↗
13. The effect of surface polarity on the CMP behavior of 6H-SiC substrates10.1134/S1070427220060099 ↗
14. Chemical mechanical polishing: theory and experiment10.1007/s40544-013-0035-x ↗
15. Advanced polishing, grinding and finishing processes for various manufacturing applications: a review10.1080/10426914.2020.1772481 ↗
16. Chemical mechanical polishing (CMP) processes for manufacturing optical silicon substrates with shortened polishing time10.1080/10426914.2013.852206 ↗
17. Theoretical and experimental analysis of material removal and surface generation in novel fixed abrasive lapping of optical surface10.1016/j.jmatprotec.2019.116570 ↗
18. Research on diamond fixed polishing abrasive size for ZnS crystal
19. Effect of polishing pad and slurry on polishing gallium oxide crystal with fixed abrasive polishing
20. Influence of acid slurries on surface quality of LBO crystal in fixed abrasive CMP10.1007/s00170-014-6662-1 ↗
21. ReaxFF molecular dynamics simulation and experimental validation about chemical reactions of water and alcohols on SiC surface10.1016/j.ceramint.2023.11.070 ↗
22. The effect of slurry viscosity on chemical-mechanical polishing of silicon wafers10.1016/S0924-0136(02)00205-4 ↗
23. Effect of surfactant based abrasive free slurry on CMP polishing rate and planarization of semi-polar (11–22) GaN surface
24. Super hard and brittle material removal mechanism in fixed abrasive lapping: theory and modeling10.1016/j.triboint.2023.108493 ↗