Exploring the multifaceted properties of novel oxide-based perovskites ABO3 (A=Nd and B Lr, Y): A DFT study
Source abstract
Abstract
The full-potential linear augmented plane wave with local orbital (FP-LAPW) technique is now used in this approach to better understand the structural, electronic, optical and mechanical properties of simple cubic oxide perovskite. NdLrO 3 and NdYO 3 compounds are studied by employing the density functional theory (DFT) with CASTEP code for the first time. The lattice parameters are found 4.2462 and 4.2301 Å for NdLrO 3 and NdYO 3 respectively. Both the compounds have 1.9 eV and 1.4 eV band gap showing the direct band gap nature of both materials. The exchange-correlation (XC) energy has been selected during this investigation with the Local Density Approximation (LDA) approach. We optimize as well as clarify the elastic constants Cij, the bulk modulus B, elasticity modulus G, Young`s modulus of stretch Y, and the Poisson ratio v. Every substance shows anisotropic behavior. NdLrO 3 and NdYO 3 compounds exhibit a direct band-gap nature, as revealed by the electronic band structure computations. These compounds were all classified as semiconductors. To quantify the number of localized electrons in various bands, partial density of states (PDOS) and total density of states (TDOS) were deployed. Both compounds are computed by fitting the dispersion relation of the imagined component. Optical properties showed that these compounds were excellent absorbers of incident radiation. Therefore, it may be assumed that these compounds could be employed in magnetic sensors because of anisotropic magnetic behavior and to capture the ultraviolet range of solar radiations.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic and transport properties of perovskites and related materials · Thermal Expansion and Ionic Conductivity · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Structural, electronic, elastic, vibrational and thermodynamic properties of antiperovskites Mg3NX (X= Ge, Sn): a DFT study10.1016/j.physleta.2022.128478 ↗
2. The importance of renewable energy sources for sustainable development10.5937/ESD2002016P ↗
3. Renewed prospects for organic photovoltaics10.1021/acs.chemrev.1c00955 ↗
4. Graphene interface engineering for perovskite solar modules: 12.6% power conversion efficiency over 50 cm2 active area10.1021/acsenergylett.6b00672 ↗
5. Examining the advances, obstacles, and achievements of tin-based perovskite solar cells: a review10.1016/j.solener.2023.111825 ↗
6. Recent progress on electrical and optical manipulations of perovskite photodetectors10.1002/advs.202100569 ↗
7. Perovskite based ferroelectric materials for energy storage devices10.21741/9781644902738-3 ↗
8. Nanocomposites of MXene for industrial applications
9. Spin polarization compensation in ferrimagnetic Co 1− x Tb x/Pt bilayers revealed by spin Hall magnetoresistance10.1103/PhysRevApplied.14.034064 ↗
10. Structural, electronic, optical and mechanical properties of oxide-based perovskite ABO3 (A= Cu, Nd and B= Sn, Sc): a DFT study10.1016/j.jssc.2022.123650 ↗
11. Perovskite materials as superior and powerful platforms for energy conversion and storage applications10.1016/j.nanoen.2020.105552 ↗
12. Piezoelectricity in hafnia10.1038/s41467-021-27480-5 ↗
13. The effect of composition on phonon softening in ABO 3-type perovskites: DFT modelling10.1039/D2CP03003A ↗
14. Optical properties and first-principles study of CH3NH3PbBr3 perovskite structures10.1021/acsomega.0c01044 ↗
15. Theoretical efficiency limits for energy conversion devices10.1016/j.energy.2010.01.024 ↗
16. Development of quizz-based creative thinking skill assessment in thematic learning of elementary School class V students10.47191/ijcsrr/V6-i6-01 ↗
17. Geometric optimisation of wave energy conversion devices: a survey10.1016/j.apenergy.2021.117100 ↗
18. Implementation of periodic boundary conditions for loading of mechanical metamaterials and other complex geometric microstructures using finite element analysis10.1007/s00366-019-00910-1 ↗
19. First-principles investigation of structural, electronic, optical, and mechanical properties of Na-based fluoro-perovskites NaXF3:(X= Ni, Co, Be, Ba)10.1016/j.ijleo.2022.169897 ↗
20. Are accelerated and enhanced wave function methods accurate to compute static linear and nonlinear optical properties?10.1021/acs.jctc.2c01212 ↗
21. Optimality guarantees for crystal structure prediction10.1038/s41586-023-06071-y ↗
22. An accurate prediction of electronic structure, mechanical stability and optical response of BaCuF3 fluoroperovskite for solar cell application10.1016/j.solener.2023.112199 ↗
23. Guiding principles for the rational design of hybrid materials: use of DFT methodology for evaluating non‐covalent interactions in a uranyl tetrahalide model system
24. Investigation of structural, electronic and lattice dynamical properties of XNiH3 (X= Li, Na and K) perovskite type hydrides and their hydrogen storage applications10.1016/j.ijhydene.2019.04.097 ↗
25. Structural, mechanical, electronic, optical and thermodynamic features of lead free oxide perovskites AMnO3 (A= Ca, Sr, Ba): DFT simulation based comparative study10.1016/j.physb.2023.415215 ↗
26. Connection between lattice parameters and magnetocrystalline anisotropy in the case of L10 ordered antiferromagnetic MnPt10.1016/j.jmmm.2022.170013 ↗
27. Structural, electronic, magnetic, and transport properties of the equiatomic quaternary Heusler alloy CoRhMnGe: theory and experiment10.1103/PhysRevB.96.184404 ↗
28. The shear contribution to the equation of state: a universal law for the elastic moduli of solids10.1016/j.ijsolstr.2023.112347 ↗
29. Effect of halide-mixing on tolerance factor and charge-carrier dynamics in (CH 3 NH 3 PbBr 3− x Cl x) perovskites powders10.1007/s10854-020-04475-4 ↗
30. Unexpected band gap increase in the Fe2VAl Heusler compound
31. Understanding the intrinsic surface reactivity of single-layer and multilayer PdO (101) on Pd (100)10.1021/acscatal.8b02191 ↗
32. Optical band-gap evolution and local structural change in Ge2Sb2Te5 phase change material
33. Mirzai · 2023
34. Intrinsic two-dimensional ferroelectricity with dipole locking10.1103/PhysRevLett.120.227601 ↗
35. Rheological behavior, mechanical properties, fire resistance, and gamma ray attenuation capability for eco-friendly cementitious mixes incorporating thermally treated lead sludge10.1016/j.conbuildmat.2022.129479 ↗
36. First-principles study of structural, elastic, optoelectronic and thermoelectric properties of B-site-ordered quadruple perovskite Ba4Bi3NaO1210.1016/j.jssc.2023.123955 ↗
37. Method for isolation of myxozoan proliferative stages from fish at high yield and purity: an essential prerequisite for in vitro, in vivo and genomics-based research developments10.3390/cells11030377 ↗
38. Excited state coupled cluster methods10.1002/wcms.99 ↗
39. A dynamic stability design strategy for lithium metal solid state batteries10.1038/s41586-021-03486-3 ↗
40. Ab-initio probe into the elastic, mechanical and thermo-mechanical properties of CsSe binary compound10.1142/S0217979223502211 ↗
41. Top–down approach for the deposition of photoactive (Na0. 5Bi0. 5) TiO3-based heterojunctions by flame spray: analysis of deposition parameters10.1007/s11666-023-01626-x ↗
42. Study of first principles on anisotropy and elastic constants of Y3Al2 compound10.1016/j.cjph.2019.08.011 ↗
43. A novel measure for the material resistance to ductile fracture propagation under shear-dominated deformation10.1016/j.tafmec.2020.102845 ↗
44. The evolution and future of manufacturing: a review10.1016/j.jmsy.2016.03.001 ↗
45. First-principles analysis of physical properties anisotropy for the Ag2SiS3 chalcogenide semiconductor10.1016/j.jallcom.2020.154232 ↗
46. Giant optical anisotropy in transition metal dichalcogenides for next-generation photonics10.1038/s41467-021-21139-x ↗
47. Experimental investigations on deformation of soft rock during cutting10.1016/j.ijrmms.2018.03.003 ↗
48. Optical dielectric function of gold10.1103/PhysRevB.86.235147 ↗
49. First-principle insight into the structural, electronic, elastic and optical properties of Cs-based double perovskites Cs 2 XCrCl 6 (X= K, Na)10.1039/D3RA03706A ↗
50. A four-band and polarization-independent BDS-based tunable absorber with high refractive index sensitivity10.1039/D1CP04568G ↗
51. Electro‐optic properties of some ABO3 perovskites in the paraelectric phase10.1063/1.1754003 ↗
52. First-principle calculations to investigate structural, electronic, optical, thermodynamic, and thermoelectric properties of ABO3 (A= Cs, Rb and B= Ta, Nb) compounds10.1007/s42247-021-00324-0 ↗
53. Investigations of structural, electronic and optical properties of YInO3 (Y= Rb, Cs, Fr) perovskite oxides using mBJ approximation for optoelectronic applications: a first principles study10.1016/j.mssp.2020.105064 ↗
54. Refractive index of different perovskite materials10.1557/s43578-021-00257-8 ↗