journal article·2024-04

Coupled SPH-FEM modeling of Berkovich indenter scratching of single-crystal silicon

Long Li, Peiqi Ge

Publisher page

Abstract

Single-crystal silicon, a key material in microelectronics, optoelectronics, and biomedical engineering, often incurs surface damage during diamond wire saw slicing, subsequently affecting surface quality and escalating costs. This study proposes a coupled SPH-FEM model for investigating the silicon scratching process, with an analysis of material removal and subsurface damage characteristics. The study investigates the scratching process with increasing normal loads and analyzes the influences of the normal load and the scratching direction on subsurface damage and stress. The results demonstrate a change from ductile-to-brittle transition (DBT) behavior in the workpiece as normal loads increase. The DBT critical loads are 29.2 mN and 21.6 mN for single-crystal silicon in the scratching directions of edge forward ( α = 0°) and α = 60°, respectively. The subsurface cracks and forces are substantially influenced by the normal load and the scratching direction. Scratching in the direction of α = 60° results in a larger damage layer, more radial cracks, and deeper median cracks. Meanwhile, applying smaller normal loads can reduce the subsurface damage, decreasing the area and amplitude of the residual stress zone. This study presents findings for managing subsurface damage and residual stress during the scratching process of hard and brittle materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Diamond machining of silicon: a review of advances in molecular dynamics simulation10.1016/j.ijmachtools.2014.09.013 ↗
2. Formation mechanism of wire bow and its influence on diamond wire saw process and wire cutting capability10.1016/j.ijmecsci.2020.105851 ↗
3. Wire sawing technology: a state-of-the-art review10.1016/j.precisioneng.2015.08.008 ↗
4. Research on suppressing brittle fracture and implementing ductile mode cutting for improving surface quality at silicon wafers manufacturing
5. Material removal mechanism and crack propagation in single scratch and double scratch tests of single-crystal silicon carbide by abrasives on wire saw10.1016/j.ceramint.2018.09.178 ↗
6. Analytical modeling of grinding-induced subsurface damage in monocrystalline silicon10.1016/j.matdes.2017.05.068 ↗
7. An experimental and theoretical investigation on the brittle ductile transition and cutting force anisotropy in cutting KDP crystal10.1016/j.ijmachtools.2016.04.009 ↗
8. Investigation on critical crack-free cutting depth for single crystal silicon slicing with fixed abrasive wire saw based on the scratching machining experiments10.1016/j.mssp.2017.10.027 ↗
9. Modeling and simulation of phase transformation and crack formation during scribing of mono-crystalline silicon10.1016/j.ijmecsci.2020.105527 ↗
10. Study on the subsurface damage depth of monocrystalline silicon in ultrasonic vibration assisted diamond wire sawing10.1016/j.engfracmech.2021.108077 ↗
11. Influence of single diamond wire sawing of photovoltaic monocrystalline silicon on the feed force, surface roughness and micro-crack depth10.1016/j.mssp.2022.106525 ↗
12. Depth of cut for single abrasive and cutting force in resin bonded diamond wire sawing10.1007/s00170-016-8896-6 ↗
13. Study of ductile-to-brittle transition in single grit diamond scribing of silicon: application to wire sawing of silicon wafers10.1115/1.4006177 ↗
14. Science and art of ductile grinding of brittle solids10.1016/j.ijmachtools.2020.103675 ↗
15. A material removal coefficient for diamond wire sawing of silicon
16. Effect of grit shape and crystal structure on damage in diamond wire scribing of silicon10.1111/jace.14732 ↗
17. Experimental study and smoothed particle hydrodynamics simulation of synthetic diamond grit scratching on steel10.1016/j.ijsolstr.2022.112038 ↗
18. Elastic stress fields caused by indenting brittle materials10.1080/01418618208236917 ↗
19. Sliding microindentation fracture of brittle materials: role of elastic stress fields10.1016/S0167-6636(98)00012-X ↗
20. A new analytical model for estimation of scratch‐induced damage in brittle solids10.1111/j.1551-2916.2006.01471.x ↗
21. Stress analysis in scratching of anisotropic single-crystal silicon carbide10.1016/j.ijmecsci.2018.03.042 ↗
22. Material removal mechanism and deformation characteristics of AlN ceramics under nanoscratching10.1016/j.ceramint.2019.07.034 ↗
23. Analytical modeling of the stress field in scratching anisotropic single-crystal silicon10.1016/j.mssp.2022.107099 ↗
24. Analysis of grinding surface creation by single-grit approach10.1115/1.4037992 ↗
25. Experimental and simulation studies of abrasive particles impacting monocrystalline silicon in suspension thin film flow field of ultrasonic polishing10.1007/s00170-019-03580-x ↗
26. Finite element analysis of the effect of tool rake angle on brittle-to-ductile transition in diamond cutting of silicon10.1007/s00170-019-03888-8 ↗
27. Experimental and numerical analysis of scratching induced damage during diamond wire sawing of silicon
28. Numerical and experimental investigations of micromechanical processes during wire sawing10.1016/j.ijsolstr.2014.03.040 ↗
29. Study of the mechanism of nanoscale ductile mode cutting of silicon using molecular dynamics simulation10.1016/j.ijmachtools.2006.02.016 ↗
30. Research on the effects of machining-induced subsurface damages on mono-crystalline silicon via molecular dynamics simulation10.1016/j.apsusc.2012.06.087 ↗
31. Materials removal mechanism and multi modes feature for silicon carbide during scratching10.1016/j.ijmecsci.2022.107719 ↗
32. Molecular simulation of the plastic deformation and crack formation in single grit grinding of 4H-SiC single crystal10.1016/j.ijmecsci.2023.108147 ↗
33. The investigation of influence of tool wear on ductile to brittle transition in single point diamond turning of silicon10.1016/j.wear.2016.08.003 ↗
34. Smooth particle hydrodynamics study of surface defect machining for diamond turning of silicon10.1007/s00170-016-8940-6 ↗
35. Investigation of influence of tool rake angle in single point diamond turning of silicon10.1007/s00170-017-1021-7 ↗
36. Smoothed particle hydrodynamics simulation and experimental analysis of SiC ceramic grinding mechanism10.1016/j.ceramint.2018.03.278 ↗
37. Effect of grinding damage on cutting force and ductile machining during single grain scratching of monocrystalline silicon10.1016/j.mssp.2022.107019 ↗
38. SPH and FE coupled 3D simulation of monocrystal SiC scratching by single diamond grit10.1016/j.ijrmhm.2016.09.016 ↗
39. Analysis of grit interference mechanisms for the double scratching of monocrystalline silicon carbide by coupling the FEM and SPH10.1016/j.ijmachtools.2017.04.012 ↗
40. FE-SPH hybrid method to simulate the effect of tool inclination angle in oblique diamond cutting of KDP crystal10.1016/j.ijmecsci.2021.106271 ↗
41. Cup wheel grinding-induced subsurface damage in optical glass BK7: an experimental, theoretical and numerical investigation10.1016/j.precisioneng.2019.04.003 ↗
42. Theoretical modeling and experimental analysis of single-grain scratching mechanism of fused quartz glass10.1016/j.jmatprotec.2021.117090 ↗
43. Smoothed particle hydrodynamics: theory and application to non-spherical stars10.1093/mnras/181.3.375 ↗
44. 3-D numerical analysis of orthogonal cutting process via mesh-free method
45. Liu · 2003
46. A total Lagrangian SPH method for modelling damage and failure in solids10.1016/j.ijmecsci.2019.05.003 ↗
47. SPH method applied to high speed cutting modelling10.1016/j.ijmecsci.2006.11.005 ↗
48. SPH/FE modeling of cutting force and chip formation during thermally assisted machining of Ti6Al4V alloy10.1016/j.commatsci.2013.12.018 ↗
49. A scratching force model of diamond abrasive particles in wire sawing of single crystal SiC10.1016/j.mssp.2017.05.032 ↗
50. An improved computational constitutive model for brittle materials
51. Implementation and validation of the johnson-holmquist ceramic material model in LS-dyna
52. Determination of parameters of johnson-holmquist-II (JH-2) constitutive model for red sandstone
53. Investigation on residual scratch depth and material removal rate of scratching machining single crystal silicon with Berkovich indenter10.1016/j.mssp.2019.04.037 ↗
54. Analytical prediction for depth of subsurface damage in silicon wafer due to self-rotating grinding process10.1016/j.cap.2019.02.015 ↗
55. Crystallographic effect on subsurface damage formation in silicon microcutting10.1016/j.cirp.2012.03.070 ↗
56. Experimental investigation of surface/subsurface damage formation and material removal mechanisms in SiC grinding10.1016/j.ijmachtools.2007.10.013 ↗
57. Scratching of silicon surfaces10.1016/j.ijsolstr.2018.11.024 ↗
58. Elastic stress field model and micro-crack evolution for isotropic brittle materials during single grit scratching10.1016/j.ceramint.2017.05.054 ↗
59. An analytical expression for the stress field around an elastoplastic indentation/contact10.1016/j.actamat.2006.12.030 ↗
60. A quantitative analysis for the stress field around an elastoplastic indentation/contact10.1557/jmr.2009.0097 ↗
61. Crack initiation in relation to the tool edge radius and cutting conditions in nanoscale cutting of silicon10.1016/j.ijmachtools.2006.05.006 ↗
62. Study on the subsurface damage mechanism of optical quartz glass during single grain scratching10.1016/j.ceramint.2020.11.111 ↗
63. FE-simulation based analysis of residual stresses and strain localizations in ECAP processing10.1002/pamm.201710124 ↗
64. Analytical approaches of creep crack initiation prediction coupled with the residual stress and constraint effect10.1016/j.euromechsol.2018.03.011 ↗
65. Influence of microcracks on strength of diamond wire sawn silicon substrates
66. A numerical model for the simulation of subsurface damage during wire sawing of silicon