Boosting efficiency and stability with KBr interface modification for NiOx-based inverted perovskite solar cells
Source abstract
Abstract
NiO x -based inverted structure perovskite devices possess advantages in the application of single junction and tandem solar cells. However, energy loss and instability originating from interface defects commonly result in inferior device performance. Herein, Potassium Bromide (KBr), as a buffer layer, was inserted between the perovskite and NiO x hole transport layer to modify the interface. The valence band maximum of NiO x improved to −5.37 eV which matches better with perovskite. The lifetime of hot carriers and intrinsic charge recombination revealed by Femtosecond transient absorption spectroscopy (fs-TAS) confirm that KBr modification can facilitate charge separation. Benefiting from the improvement of perovskite quality which results from K + diffusion and enhanced charge transport, the power conversion efficiency (PCE) of the modified device reaches up to 19.21%, whereas the pristine is 17.56%. Meanwhile, the air stability of the unencapsulated device also improved dramatically, which maintains 80% of its initial PCE after 1100 h high humidity storage. This work unambiguous reveals the mechanism of perovskite/NiO x interface modification and provides a facile and effective strategy for interface optimization.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
2. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
3. Best Research-Cell Efficiency Chart, https://www.nrel.gov/pv/assets/pdfs/best-research-cell-efficiencies.20200925.pdf (accessed: September 2020).
4. Conformal quantum dot–SnO2 layers as electron transporters for efficient perovskite solar cells10.1126/science.abh1885 ↗
5. How to make over 20% efficient perovskite solar cells in regular (n–i–p) and inverted (p–i–n) architectures10.1021/acs.chemmater.8b00136 ↗
6. On the current–voltage hysteresis in perovskite solar cells: dependence on perovskite composition and methods to remove hysteresis10.1002/adma.201805214 ↗
7. Enhanced photovoltage for inverted planar heterojunction perovskite solar cells10.1126/science.aap9282 ↗
8. Recent advances in the inverted planar structure of perovskite solar cells10.1021/acs.accounts.5b00404 ↗
9. Stable dynamics performance and high efficiency of ABX3-type super-alkali perovskites first obtained by introducing H5O2 cation10.1002/aenm.201900664 ↗
10. Multifunctional CNT:TiO2 additives in spiro-OMeTAD layer for highly efficient and stable perovskite solar cells10.1002/eom2.12099 ↗
11. Yttrium-doped Sn3O4 two-dimensional electron transport material for perovskite solar cells with efficiency over 23%10.1002/eom2.12202 ↗
12. Defect passivation using ultrathin PTAA layers for efficient and stable perovskite solar cells with a high fill factor and eliminated hysteresis10.1039/C9TA08314F ↗
13. Moth eye-inspired highly efficient, robust, and neutral-colored semitransparent perovskite solar cells for building-integrated photovoltaics10.1002/eom2.12117 ↗
14. Monolithic perovskite tandem solar cells: a review of the present status and advanced characterization methods toward 30% efficiency10.1002/aenm.201904102 ↗
15. Nickel oxide for inverted structure perovskite solar cells10.1016/j.jechem.2020.04.027 ↗
16. Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction10.1126/science.abd4016 ↗
17. Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells10.1038/s41560-019-0538-4 ↗
18. Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells10.1038/s41560-018-0219-8 ↗
19. Defect compensation in formamidinium–caesium perovskites for highly efficient solar mini-modules with improved photostability10.1038/s41560-021-00831-8 ↗
20. A piperidinium salt stabilizes efficient metal-halide perovskite solar cells10.1126/science.aba1628 ↗
21. Perovskite solar cells employing organic charge-transport layers10.1038/nphoton.2013.341 ↗
22. Inverted planar perovskite solar cells based on CsI-doped PEDOT:PSS with efficiency beyond 20% and small energy loss10.1039/C9TA08995K ↗
23. Synergistic benefits of cesium-doped aqueous precursor in air-processed inverted perovskite solar cells10.1002/solr.201900406 ↗
24. Recent progress of inverted perovskite solar cells with a modified PEDOT:PSS hole transport layer10.1021/acsami.0c13576 ↗
25. PSS bilayer as hole transport layer for highly efficient and stable perovskite solar cells10.1016/j.orgel.2017.10.034 ↗
26. Robust inorganic hole transport materials for organic and perovskite solar cells: insights into materials electronic properties and device performance10.1002/solr.202000555 ↗
27. Solution-Processed Cu2O and CuO as hole transport materials for efficient perovskite solar cells10.1002/smll.201501330 ↗
28. Inorganic halide perovskite solar cells: progress and challenges10.1002/aenm.202000183 ↗
29. Efficient and stable inverted planar perovskite solar cells employing CuI as hole-transporting layer prepared by solid–gas transformation10.1002/ente.201700422 ↗
30. Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%10.1126/science.aam5655 ↗
31. Pinhole-free and surface-nanostructured NiOx film by room-temperature solution process for high-performance flexible perovskite solar cells with good stability and reproducibility10.1021/acsnano.5b07043 ↗
32. Post-treatment-Free solution-processed non-stoichiometric NiOx nanoparticles for efficient hole-transport layers of organic optoelectronic devices10.1002/adma.201405391 ↗
33. Low temperature processed, high-performance and stable NiOx based inverted planar perovskite solar cells via a poly(2-ethyl-2-oxazoline) nanodots cathode electron-extraction layer
34. Nickel oxide as efficient hole transport materials for perovskite solar cells10.1002/solr.201900001 ↗
35. P-type transparent conducting oxides10.1088/0953-8984/28/38/383002 ↗
36. High-performance and environmentally stable planar heterojunction perovskite solar cells based on a solution-processed copper-doped nickel oxide hole-transporting layer10.1002/adma.201404189 ↗
37. Electrical properties of undoped and Li-doped NiO thin films deposited by RF sputtering without intentional heating10.7567/JJAP.55.088003 ↗
38. Cesium doped NiOx as an efficient hole extraction layer for inverted planar perovskite solar cells10.1002/aenm.201700722 ↗
39. Boosting the conversion efficiency over 20% in MAPbI3 perovskite planar solar cells by employing a solution-processed aluminum-doped nickel oxide hole collector10.1021/acsami.0c04618 ↗
40. Valence band-edge engineering of nickel oxide nanoparticles via cobalt doping for application in p-type dye-sensitized solar cells10.1021/am301565j ↗
41. Critical role of removing impurities in nickel oxide on high-efficiency and long-term stability of inverted perovskite solar cells10.1002/anie.202116534 ↗
42. Surface treatment via Li-bis-(trifluoromethanesulfonyl) imide to eliminate the hysteresis and enhance the efficiency of inverted perovskite solar cells10.1039/C7TC03984K ↗
43. Molecule-doped nickel oxide: verified charge transfer and planar inverted mixed cation perovskite solar cell10.1002/adma.201800515 ↗
44. Dual interfacial modifications enable high performance semitransparent perovskite solar cells with large open circuit voltage and fill factor10.1002/aenm.201602333 ↗
45. Effects of a molecular monolayer modification of NiO nanocrystal layer surfaces on perovskite crystallization and interface contact toward faster hole extraction and higher photovoltaic performance10.1002/adfm.201505215 ↗
46. Improvement of red light harvesting ability and open circuit voltage of Cu:NiOx based p-i-n planar perovskite solar cells boosted by cysteine enhanced interface contact10.1016/j.nanoen.2018.01.017 ↗
47. Surface sulfuration of NiO boosts the performance of inverted perovskite solar cells10.1002/solr.202000270 ↗
48. Hydrothermally treated SnO2 as the electron transport layer in high-efficiency flexible perovskite solar cells with a certificated efficiency of 17.3%10.1002/adfm.201807604 ↗
49. NiO/Perovskite heterojunction contact engineering for highly efficient and stable perovskite solar cells10.1002/advs.201903044 ↗
50. Passivation of bulk and interface defects in sputtered-NiOx-based planar perovskite solar cells: a facile interfacial engineering strategy with alkali metal halide salts10.1021/acsaem.1c00032 ↗
51. Water and oxygen co-induced microstructure relaxation and evolution in CH3NH3PbI310.1039/D1CP02704B ↗
52. Absorption spectra and oscillator strength of KBr:Pb10.1016/0022-3697(86)90053-3 ↗
53. A novel quadruple-cation absorber for universal hysteresis elimination for high efficiency and stable perovskite solar cells10.1039/C7EE02634J ↗
54. Anti-solvent engineering via potassium bromide additive for highly efficient and stable perovskite solar cells10.1016/j.orgel.2021.106310 ↗
55. Stable and low-photovoltage-loss perovskite solar cells by multifunctional passivation10.1038/s41566-021-00829-4 ↗
56. Impact of peripheral groups on phenothiazine-based hole-transporting materials for perovskite solar cells10.1021/acsenergylett.8b00395 ↗
57. Coagulated SnO2 colloids for high-performance planar perovskite solar cells with negligible hysteresis and improved stability10.1002/anie.201904945 ↗
58. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH 3 NH 3 PbI 3 planar heterojunction solar cells10.1038/ncomms6784 ↗
59. 2D materials for conducting holes from grain boundaries in perovskite solar cells10.1038/s41377-021-00515-8 ↗
60. Interpretation and evolution of open-circuit voltage, recombination, ideality factor and subgap defect states during reversible light-soaking and irreversible degradation of perovskite solar cells10.1039/C7EE02415K ↗
61. Improving the stability and performance of perovskite solar cells via off-the-shelf post-device ligand treatment10.1039/C8EE00580J ↗
62. High-performance semitransparent perovskite solar cells with 10% power conversion efficiency and 25% average visible transmittance based on transparent CuSCN as the hole-transporting material10.1002/aenm.201500486 ↗
63. Efficient and stable inverted perovskite solar cells incorporating secondary amines
64. Modeling anomalous hysteresis in perovskite solar cells10.1021/acs.jpclett.5b01645 ↗