The structural, mechanical, and optoelectronic properties of Cu2-II-Sn-VI4 (II = Mg, Zn, Cd; VI = S, Se): A DFT study
Source abstract
Abstract
Quaternary compound Cu 2ZnSnX 4 (X = S, Se) is of great interest to many researchers for photovoltaic applications in recent years. In the present study, the first-principles calculations are performed to investigate the influence of cation substitution on the different physical properties of Cu 2ZnSnS 4 (CZTS) and Cu 2ZnSnSe 4 (CZTSe). The difference in stability between two Kesterite and Stannite structures is examined for each compound. The results show that the pristine Kesterite structure will be transformed into the Stannite structure when the Zn atoms are replaced by the Mg or Cd atoms. Our results are consistent well with the available literature. The mechanical stability of six compounds are proved and they are ductile materials. The allowed direct electronic transition is found for all compounds at the Γ point. The band gap variation is analyzed in detail. The band gaps calculated from hybrid functional PBE0 of the studied compounds can agree well with the experimental data. The suitable band gap values of 1.12 and 1.28 eV are obtained for Cu 2MgSnSe 4 (CMTSe) and Cu 2CdSnS 4 (CCTS) in single-junction solar cells, whereas the band gaps of Cu 2MgSnS 4 (CMTS, 1.70 eV) and Cu 2CdSnSe 4 (CCTSe, 0.77 eV) are too large or small. The band gap energy difference between two tetragonal structures is shown to be negligible for CMTS, CMTSe, CCTS, and CCTSe. Furthermore, the optical properties are compared, and CMTSe and CCTS show strong light absorption capacity from 300 to 800 nm. Our study indicates that both CMTSe and CCTS are the promising materials for solar cell applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS-Se solar cells10.1039/C5EE02153G ↗
2. CZTS nanocrystals: a promising approach for next generation thin film photovoltaics10.1039/c3ee41627e ↗
3. Cation substitution in earth-abundant kesterite photovoltaic materials10.1002/advs.201870021 ↗
4. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
5. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
6. The steady rise of kesterite solar cells10.1021/acsenergylett.7b00131 ↗
7. Solar cell efficiency tables (Version 45)10.1002/pip.2573 ↗
8. Trigonal Cu2-II-Sn-VI4 (II = Ba, Sr and VI = S, Se) quaternary compounds for earth-abundant photovoltaics10.1039/C5CP06977G ↗
9. Darstellung und Kristallstruktur von Cu2SrSnS410.1002/zaac.19764190112 ↗
10. Präparative und röntgenographische Untersuchung am System Cu2-xAgxBaSnS410.1002/zaac.19764260308 ↗
11. First-principles insights into the electronic structure, optical and band alignment properties of earth-abundant Cu2SrSnS4 solar absorber10.1038/s41598-021-84037-8 ↗
12. First-principles study of the new potential photovoltaic absorber: Cu2MgSnS4 compound10.1088/1674-1056/26/7/076201 ↗
13. Theoretical study of structural, elastic and thermodynamic properties of Cu2MgSnX4 (X = S, Se and Te) quaternary compounds10.1016/j.cocom.2018.e00339 ↗
14. The structural, morphological and optical-electrical characteristic of Cu2XSnS4 (X:Cu,Mg) thin films fabricated by novel ultrasonic co-spray pyrolysis10.1016/j.matlet.2016.02.088 ↗
15. A new wide band gap thermoelectric quaternary selenide Cu2MgSnSe410.1063/1.4933277 ↗
16. Quaternary semiconductors Cu2MgSnS4 and Cu2MgSnSe4 as potential thermoelectric materials10.1088/2399-6528/aa9286 ↗
17. Physical properties evolution of sprayed Cu2MgSnS4 thin films with growth parameters and vacuum annealing10.1016/j.spmi.2020.106711 ↗
18. First principles calculation of the electronic-optical properties of Cu2MgSn(SxSe1-x)410.1007/s11801-020-9042-0 ↗
19. Synthesis of new earth-abundant kesterite Cu2MgSnS4 nanoparticles by hot-injection method10.1246/cl.140208 ↗
20. Effect of Mg doping on Cu2ZnSnS4 solar cells prepared by DMF-based solution method10.1016/j.optmat.2021.111211 ↗
21. Synthesis and investigation of environmental protection and earth-abundant kesterite Cu2MgxZn1-xSn(S,Se)4 thin films for solar cells10.1016/j.ceramint.2018.05.167 ↗
22. Cation substitution of solution-processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency10.1002/aenm.201500682 ↗
23. Improving the performance of solution-processed Cu2ZnSn(S,Se)4 photovoltaic materials by Cd2+ substitution10.1021/acs.chemmater.6b02111 ↗
24. Effect of Cd on cation redistribution and order-disorder transition in Cu2(Zn,Cd)SnS410.1039/C9TA09572A ↗
25. Effects of sulfurization temperature on the structural and optical properties of Cu2CdSnS4 thin films prepared by direct liquid method10.1016/j.matlet.2017.02.002 ↗
26. Experimental and theoretical study into interface structure and band Alignment of the Cu2Zn1–xCdxSnS4 heterointerface for photovoltaic applications10.1021/acsaem.9b02314 ↗
27. Quaternary Cu2CdSnS4 nanoparticles synthesized by a simple solvothermal method10.1016/j.cplett.2012.03.016 ↗
28. Bandgap engineering of Cu2CdxZn1−xSnS4 alloy for photovoltaic applications: a complementary experimental and first-principles study10.1063/1.4829457 ↗
29. Thermal analysis and synthesis from the melts of Cu-based quaternary compounds Cu–III–IV–VI4 and Cu2–II–IV–VI4 (II = Zn, Cd; III = Ga, In; IV = Ge, Sn; VI = Se)10.1016/S0022-0248(99)00468-6 ↗
30. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
31. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
32. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
33. Toward reliable density functional methods without adjustable parameters: the PBE0 model10.1063/1.478522 ↗
34. First principles phonon calculations in materials science10.1016/j.scriptamat.2015.07.021 ↗
35. Induced effects by the substitution of Zn in Cu2ZnSnX4 (X=S and Se)10.1016/j.tsf.2016.02.005 ↗
36. Experimental and theoretical investigations on the composition-dependent structural phase transition in Cu2CdxZn1−xSnS410.1088/2053-1591/ab59a0 ↗
37. Single crystal preparation and crystal structure of the Cu2Zn/Cd,Hg/SnSe4 compounds10.1016/S0925-8388(02)00006-3 ↗
38. Crystallographic and optical properties of (Cu,Ag)2ZnSnS4 and (Cu, Ag)2ZnSnSe4 solid solutions10.1002/pssc.201400343 ↗
39. Polarized infrared reflectivity of Cu2CdSnS4 single crystals10.1063/5.0024482 ↗
40. Necessary and sufficient elastic stability conditions in various crystal systems10.1103/PhysRevB.90.224104 ↗
41. Unraveling the factors affecting the mechanical properties of halide perovskites from first-principles calculations10.1021/acs.jpcc.1c10635 ↗
42. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
43. Band-gap-graded Cu2ZnSn(S1-xSex)4 solar cells fabricated by an ethanol-based, particulate precursor ink route10.1038/srep03069 ↗
44. First-principles calculations to investigate the electronic and optical properties of Cu2ZnSnS4 with Ag and Se codoping10.1016/j.chemphys.2021.111418 ↗
45. The mechanical and optoelectronic properties of (Cu1-xAgx)2ZnSnSe4 solid solutions: a theoretical study10.1016/j.matchemphys.2022.125757 ↗
46. Electronic and optical properties of Cu2XSnS4 (X = Be, Mg, Ca, Mn, Fe, and Ni) and the impact of native defect pairs10.1063/1.4984115 ↗
47. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗