Development of novel multi-selective slurry with mechanically driven etching for through silicon via chemical mechanical polishing
Source abstract
Abstract
As a new generation of semiconductor chips such as 3D integration has been developed, the circuit becomes diverse and fine with the composition of various materials. In this study, the novel multi-selective slurry was developed to control each material removal of SiO 2, Si 3N 4, and Cu films respectively. The material removal rate (MRR) of SiO 2 was chemically controlled using tetrabutylammonium fluoride (TBAF), in which the addition of 0.5 mM of TBAF increases the MRR of only SiO 2 film by 16 times larger than pristine silica slurry without any side effect on the MRR of other materials. The MRR of the Si 3N 4 wafer was mostly influenced by mechanical abrasion owing to the solid contents. The MRR of the Cu wafer was adjusted by varying the amount of benzotriazole added as an inhibitor. Because each additive affected the material removal only for the target film, the MRR for various materials could be selectively adjusted. Finally, the dishing or protrusion of Cu pad in through-silicon via (TSV) could be controlled in a nanometer scale by using a fabricated multi-selective slurry. In addition, a completely flat surface was obtained when TSV wafer was polished by the selectivity of 1:1:1 on Si 3N 4, SiO 2, and Cu films.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Near-Field Optical Microscopy
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. shallow trench isolation chemical mechanical planarization: a review10.1149/2.0071511jss ↗
2. Scratch formation and its mechanism in chemical mechanical planarization (CMP)10.1007/s40544-013-0026-y ↗
3. Atomistic scale nanoscratching behavior of monocrystalline Cu influenced by water film in CMP process10.1016/j.apsusc.2017.11.199 ↗
4. CMP process optimization engineering by machine learning10.1109/TSM.2021.3072361 ↗
5. Development of green chemical mechanical planarization (CMP) process using minimum quantity slurry mist10.11159/icmie18.117 ↗
6. A study on the pattern effects of chemical mechanical planarization with CNN-based models
7. Transformation of silica fume into chemical mechanical polishing (CMP) nano-slurries for advanced semiconductor manufacturing10.1016/j.powtec.2010.09.005 ↗
8. Effects of CMP retaining ring material on the performance of wafer polishing
9. Advances in chemical-mechanical planarization10.1557/mrs2002.244 ↗
10. Chemical-mechanical planarization of semiconductor materials
11. Advances in chemical mechanical planarization (CMP)
12. Li · 2007
13. Chemical-mechanical planarization of Cu and Ta10.1007/s11837-001-0104-x ↗
14. Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a nickel alloy10.1016/j.apsusc.2019.144670 ↗
15. Environment friendly chemical mechanical polishing of copper
16. Chemical mechanical polishing for sapphire wafers using a developed slurry10.1016/j.jmapro.2021.01.004 ↗
17. 6 μm pitch high density Cu-Cu bonding for 3D IC stacking10.1109/ECTC.2016.141 ↗
18. Cu microstructure of high density cu hybrid bonding interconnection
19. Novel stacked CMOS image sensor with advanced Cu2Cu hybrid bonding
20. Reliable 300 mm wafer level hybrid bonding for 3D stacked CMOS image sensors10.1109/ECTC.2016.202 ↗
21. Multi-stack wafer bonding demonstration utilizing Cu to Cu hybrid bonding and TSV enabling diverse 3D integration, 2021 IEEE 71st electron
22. Yoshinaga · 2010
23. TSV CMP process development and pitting defect reduction
24. Effect of ammonium citrates as an auxiliary complexing agent in TSV copper film CMP
25. Cu CMP dishing in high density Cu pad for fine pitch wafer-to-wafer (W2W) hybrid bonding, 2021
26. Multiselectivity chemical mechanical polishing for NAND flash memories beyond 32 nm10.1149/1.3368675 ↗
27. Effects of abrasive particle size and molecular weight of poly(acrylic acid) in ceria slurry on removal selectivity of SiO2/Si3N4 films in shallow trench isolation chemical mechanical planarization10.1557/jmr.2007.0097 ↗
28. Dishing-free chemical mechanical planarization for copper films10.1016/j.colsurfa.2021.126143 ↗
29. The study on the effect of pattern density distribution on the STI CMP process10.1063/1.4998394 ↗
30. Effects of slurry in Cu chemical mechanical polishing (CMP) of TSVs for 3-D IC integration10.1109/TCPMT.2011.2177663 ↗
31. Selective chemical mechanical polishing of silicon dioxide over silicon nitride for shallow trench isolation using ceria slurries10.1149/1.3230624 ↗
32. Abrasive and additive interactions in high selectivity STI CMP slurries10.1016/j.mee.2013.10.004 ↗
33. A reverse selectivity ceria slurry for the damascene gate chemical mechanical planarization process10.1143/JJAP.43.7434 ↗
34. Alkaline barrier slurry applied in TSV chemical mechanical planarization
35. A novel kind of TSV slurry with guanidine hydrochloride10.1088/1674-4926/36/10/106003 ↗
36. Abrasive for chemical mechanical polishing
37. Role of abrasives in high selectivity STI CMP slurries10.1016/j.mee.2008.04.031 ↗
38. Modeling the dissociation conditions of carbon dioxide + TBAB, TBAC, TBAF, and TBPB semiclathrate hydrates10.1021/je500243k ↗
39. Anhydrous tetrabutylammonium fluoride10.1021/ja0440497 ↗
40. Etching mechanism of silicon nitride in HF-based solutions10.1149/1.1348262 ↗
41. Effect of glycine and hydrogen peroxide on chemical–mechanical planarization of copper10.1016/S0040-6090(02)00989-6 ↗
42. Hydroxyl radical formation in H2O2 ‐ amino acid mixtures and chemical mechanical polishing of copper10.1149/1.1393979 ↗
43. Inhibitory effect of amino acids on Al pitting corrosion in 0.1 M NaCl10.1023/A:1018490727290 ↗
44. The effect of hydrogen peroxide in a citric acid based copper slurry on Cu polishing10.1149/1.2393015 ↗
45. Effect of CMP slurry chemistry on copper nanohardness10.1149/1.2903293 ↗
46. Improved ghost plating of light-induced plating on crystalline silicon solar cells by SiO2/SiN selective etching10.4028/www.scientific.net/AMM.71-78.2290 ↗
47. Oxygen removal from raw silicon powder by the HF-ethanol solution etching10.1002/sia.5188 ↗
48. Dependence of wet etch rate on deposition, annealing conditions and etchants for PECVD silicon nitride film
49. Etching process of SiO2 by HF molecules10.1063/1.479480 ↗
50. Reinhardt · 2011
51. Selective wet etching of Si3N4/SiO2 in phosphoric acid with the addition of fluoride and silicic compounds10.1016/j.mee.2013.12.027 ↗
52. Selective etching of silicon oxide versus nitride with low oxide etching rate10.4028/www.scientific.net/SSP.255.75 ↗
53. Chemical dry etching of silicon nitride and silicon dioxide using CF4/O2/N2 gas mixtures10.1116/1.580203 ↗
54. Investigation of reactive ion etching of dielectrics and Si in CHF3/O2 or CHF3/Ar for photovoltaic applications10.1116/1.2333571 ↗
55. Study of the SiO2-to-Si3N4 etch selectivity mechanism in inductively coupled fluorocarbon plasmas and a comparison with the SiO2-to-Si mechanism
56. Determination of the adsorbed layer thickness of functional anionic polymers utilizing chemically modified polystyrene nanoparticles10.1016/j.colsurfa.2014.05.014 ↗
57. Facile construction of thermo-responsive Pickering emulsion for esterification reaction in phase transfer catalysis system
58. Zhang · 2007
59. Tabulated functions for heterogeneous reaction rates: the attack of vitreous silica by hydrofluoric acid10.1021/j100839a019 ↗
60. A study of the dissociation state and the SiO2 etching reaction for HF solutions of extremely low concentration10.1149/1.2054733 ↗
61. Corrosion control of copper wiring by barrier CMP slurry containing azole inhibitor: combination of simulation and experiment10.1016/j.colsurfa.2020.124872 ↗
62. Selective atomic layer etching of HfO2 over silicon by precursor and substrate-dependent selective deposition
63. Characterizing fluorocarbon assisted atomic layer etching of Si using cyclic Ar/C4F8 and Ar/CHF3 plasma
64. Fluorination of silylated nanosilicas using c-C4F8 radiofrequency plasma10.1007/s13204-020-01341-x ↗
65. Superconducting diamond on silicon nitride for device applications
66. Optical gratings coated with thin Si3N4 layer for efficient immunosensing by optical waveguide lightmode spectroscopy10.3390/bios2020114 ↗
67. Wet-chemical treatment of Si3N4 surfaces studied using infrared attenuated total reflection spectroscopy10.1149/1.1851056 ↗
68. How the surface energy of ultra-thin CuF2 film as anode buffer layer affect the organic light-emitting devices?10.1063/1.3604399 ↗
69. On the origins of strain inhomogeneity in amorphous materials10.1038/s41598-018-19900-2 ↗
70. Shape classification of fumed silica abrasive and its effects on chemical mechanical polishing10.1016/j.powtec.2020.11.058 ↗
71. A model for mechanical wear and abrasive particle adhesion during the chemical mechanical polishing process10.1149/1.1346614 ↗
72. Devine · 2000
73. Statistics of Si-O bond-breakage rate variations induced by O-Si-O angle fluctuations
74. Highly selective chemical mechanical polishing of Si3N4 over SiO2 using advanced silica abrasive10.7567/JJAP.56.056501 ↗
75. Incorporation of Cu passivators in post-CMP cleaners10.1149/1.2779409 ↗
76. The effects of post chemical mechanical planaization buffing on defect density of tungsten and oxide wafers10.1149/1.1838943 ↗
77. CMP challenges for advanced technology nodes10.1557/adv.2017.366 ↗
78. Iler · 1979
79. Contactless bottom-up electrodeposition of nickel for 3D integrated circuits10.1039/C5RA03683F ↗
80. Synthesis of mesoporous silica nanoparticles10.1039/c3cs35405a ↗
81. Effect of relative surface charge of colloidal silica and sapphire on removal rate in chemical mechanical polishing10.1007/s40684-019-00020-9 ↗
82. Effect of solvent film and zeta potential on interfacial interactions during optical glass polishing10.1364/AO.57.005657 ↗
83. Role of poly(diallyldimethylammonium chloride) in selective polishing of polysilicon over silicon dioxide and silicon nitride films10.1021/la104257k ↗
84. Instability of anhydrous tetra-n-alkylammonium fluorides10.1021/jo00160a041 ↗
85. Semi-empirical material removal rate distribution model for SiO2 chemical mechanical polishing (CMP) processes10.1016/j.precisioneng.2012.12.006 ↗
86. Slurry additive effects on the suppression of silicon nitride removal during CMP10.1149/1.1817870 ↗
87. Interaction of tribochemistry and microfracture in the friction and wear of silicon nitride10.1016/0043-1648(85)90004-3 ↗
88. A model of copper CMP10.1149/1.1861175 ↗
89. Chemical roles on Cu-slurry interface during copper chemical mechanical planarization10.1016/j.apsusc.2013.12.150 ↗
90. Analysis of Cu CMP according to corrosion inhibitor concentration
91. Research on influences of contact force in chemical mechanical polishing (CMP) process
92. Effect of non-spherical colloidal silica particles on removal rate in oxide CMP10.1007/s12541-015-0334-4 ↗
93. Highly efficient and damage-free polishing of GaN (0 0 0 1) by electrochemical etching-enhanced CMP process10.1016/j.apsusc.2020.145957 ↗
94. The influence of pH and temperature on polish rates and selectivity of silicon dioxide and nitride films10.1557/PROC-566-13 ↗
95. Optimization of HNA etching parameters to produce high aspect ratio solid silicon microneedles10.1088/0960-1317/22/9/095017 ↗
96. Arrhenius characterization of ILD and copper CMP processes10.1149/1.1635388 ↗
97. 2017 · vol. 57
98. Three-dimensional hybrid bonding integration challenges and solutions toward multi-wafer stacking10.1557/mrc.2020.77 ↗
99. Ti/Cu CMP process for wafer level 3D integration10.6117/kmeps.2012.19.3.037 ↗
100. Cu/SiO2 CMP process for wafer level Cu bonding10.6117/kmeps.2013.20.2.047 ↗