journal article·2025-02

The incorporation of Cs and K into the crystal structure of Rb2SnBr6 double perovskite: A DFT perspective

Redi Kristian Pingak, Amine Harbi, Fidelis Nitti, Soukaina Bouhmaidi, David Tambaru, Albert Z. Johannes, Nikodemus U.J. Hauwali, Abdul Wahid, M. Moutaabbid, Larbi Setti

Publisher page

Abstract

This study aims to investigate the effects of incorporating cesium (Cs) and potassium (K) into the crystal structure of Rb 2SnBr 6. The structural, mechanical, and optoelectronic features of both the parent and derived compounds were calculated using DFT whereas their thermoelectric properties were evaluated using the BoltzTraP code. The optimized lattice parameter of Rb 2SnBr 6 was found to be 11.01 Å. The results also indicated that the incorporation of Cs (K) into the structure of Rb 2SnBr 6 increases (decreases) its lattice parameter to be 11.13 Å (10.94 Å). The compounds are predicted to possess chemical stability as indicated from their negative formation energy. In addition, their calculated elastic parameters satisfy the Born-Huang stability criteria and their elastic tensors are all positive, implying their mechanical stability. The results also showed that when Cs and K are introduced into the crystal structure of Rb 2SnBr 6, its brittle behavior slightly reduces and the ductile behavior grows in some direction, making them more flexible in various applications. The introduction of Cs and K was also found to widen the band gap of Rb 2SnBr 6 perovskite. The values of PBE bandgap of Rb 2SnBr 6, CsRbSnBr 6, and KRbSnBr 6 are 1.28 eV, 1.94 eV, and 2.01 eV while those of SCAN are 1.58 eV, 1.94 2.27 eV, and 2.34 eV, respectively. Furthermore, their remarkable optical properties including high absorption coefficient and low reflectivity ensured their potential applications for various applications including wide-band gap perovskite solar cells. The results also revealed that the incorporation of K into Rb 2SnBr 6 crystal structure improves its thermoelectric properties between 50 K and 500 K. The highest ZT values of KRbSnBr 6, Rb 2SnBr 6, and CsRbSnBr 6 are 0.766 (at 100 K), 0.749 (at 800 K), and 0.746 (at 800 K), respectively. This highlights their potential for thermoelectric applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Thermal Expansion and Ionic Conductivity · Optical properties and cooling technologies in crystalline materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Comprehensive prediction of lead-free mixed-valence Cs2AgIAuIIIX6 (X = Cl, Br, I) halide double perovskites for high-efficiency photovoltaics10.1016/j.molstruc.2024.138883 ↗
2. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
3. Towards lead-free perovskite photovoltaics and optoelectronics by ab-initio simulations10.1038/s41598-017-13172-y ↗
4. Lead-free perovskites InSnX3 (X = Cl, Br, I) for solar cell applications: a DFT study on the mechanical, optoelectronic, and thermoelectric properties10.1088/2053-1591/acf984 ↗
5. Numerical investigation of the novel lead-free and eco-friendly InSnCl3-based inorganic perovskite solar cell using SCAPS-1D device simulation
6. Investigation of structural, electronic, elastic and optical properties of Ge-halide perovskites NaGeX3 (X = Cl, Br and I): a first-principles DFT study10.1016/j.physb.2023.415003 ↗
7. The structural, magnetic, optoelectronic, and mechanical characteristics of NaGeX3 perovskites under pressure for soler-cell applications10.1088/2053-1591/ad594d ↗
8. Pressure-induced structural, electronic, and optical properties of lead-free NaGeX3 (X = F, Cl, Br, and I) perovskites: first-principles calculation10.1002/adts.202400112 ↗
9. A DFT study to explore structural, elastic, mechanical, phonon, electronic and optical properties of halide perovskites AgXF3 (X=Be,Ca) with PBEsol, TB-mBJ and SCAN functionals10.1002/qua.27447 ↗
10. A DFT investigation of lead-free TlSnX3 (X = Cl, Br, or I) perovskites for potential applications in solar cells and thermoelectric devices10.1039/D3RA06685A ↗
11. First-Principles study on the optoelectronic and mechanical properties of lead-free semiconductor silicon perovskites ASiBr3 (A = K, Rb, Cs)10.1149/2162-8777/ad57ef ↗
12. Exploring the physical properties of Rb2TlSbM6 (M = Cl, Br) inorganic halide perovskites for solar cell applications: a DFT study10.1016/j.inoche.2024.112528 ↗
13. Study of excitonic effects, 3D-elastic, optoelectronic and thermoelectric properties of new inorganic double perovskites CsKAgSbX6 (X = Cl, Br) for solar cell applications10.1007/s10853-024-09687-1 ↗
14. First-principles calculations to investigate lead-free double perovskites CsInSbAgX6 (X = Cl, Br and I) for optoelectronic and thermoelectric applications10.1016/j.comptc.2023.114251 ↗
15. Electronic and optical properties of vacancy ordered double perovskites A2BX6 (A = Rb, Cs; B = Sn, Pd, Pt; and X = Cl, Br, I): a first principles study10.1038/s41598-021-86145-x ↗
16. First-principles calculations to investigate optoelectronic, thermoelectric and elastic properties of novel lead-free halide perovskites CsRbPtX6 (X = Cl, Br and I) compounds for solar cells applications10.1016/j.physb.2023.415242 ↗
17. Predicting Optoelectronic, Transport and 3D-elastic properties of RbKTiX6 (X = Cl, Br, I) perovskites for energy applications10.1007/s10904-024-03093-5 ↗
18. Wide-bandgap metal halide perovskites for tandem solar cells10.1021/acsenergylett.0c02105 ↗
19. Wide-band-gap (2.0 eV) perovskite solar cells with a VOC of 1.325 V fabricated by a green-solvent strategy10.1021/acsami.3c00895 ↗
20. Halide-dependent humidity sensing of Cs2SnX6 (X = Cl, Br, I) perovskites for real-time human physiological moisture detection10.1039/D4TC01463D ↗
21. Lead-free double perovskite Cs2SnX6: facile solution synthesis and excellent stability
22. Optical-Vibrational properties of the Cs2SnX6 (X = Cl, Br, I) defect perovskites and hole-transport efficiency in dye-sensitized solar cells10.1021/acs.jpcc.6b02175 ↗
23. Lead-free defective halide perovskites Cs2SnX6 (X = Cl, Br, I) for highly robust formaldehyde sensing at room temperature10.1016/j.scriptamat.2023.115541 ↗
24. Defect perovskites under pressure: structural evolution of Cs2SnX6 (X = Cl, Br, I)10.1021/acs.jpcc.8b08449 ↗
25. First-principles study of halide double perovskite Cs2SnX6 (X=Cl, Br, I) for solar cell applications10.1142/S0217984923502238 ↗
26. Modulation mechanism of electronic and optical properties of Cs2SnX6(X = Cl, Br and I) under hydrostatic or uniaxial pressure
27. Computational prediction of structural, electronic, and optical properties and phase stability of double perovskites K2SnX6 (X = I, Br, Cl)10.1039/C9RA09232C ↗
28. Electronic, optical, and thermoelectric properties of vacancy-ordered double perovskite K2SnX6 (X = Cl, Br, I) from first-principle calculations10.1088/1402-4896/ad1ad8 ↗
29. Revealing the optoelectronic properties of tin-based vacancy ordered double perovskites: K2SnBr6 and Rb2SnBr610.1063/5.0061126 ↗
30. High-throughput screening of stable and efficient double inorganic halide perovskite materials by DFT10.1038/s41598-022-16221-3 ↗
31. Revealing the structural, electronic and optical properties of lead-free perovskite derivatives of Rb2SnX6(X = Cl, Br and I): a theory calculation10.1016/j.solener.2019.08.030 ↗
32. Facile preparation of highly efficient Te4+-doped Rb2SnCl6 perovskites for white light-emitting diodes10.1016/j.jlumin.2023.119904 ↗
33. Lead-free Rb2SnCl6:Bi perovskite nanocrystals for luminescence emission10.1021/acsanm.2c01647 ↗
34. Lead-free perovskite variant Rb2SnCl6:Te based phosphor-sapphire composite for high-power laser-driven lighting10.1016/j.jlumin.2022.119212 ↗
35. Vacancy-ordered CsRbGeCl6 and CsRbGeBr6 perovskites as new promising non-toxic materials for photovoltaic applications: a DFT investigation
36. Novel vacancy-ordered RbKGeCl6 and RbKGeBr6 double perovskites for optoelectronic and thermoelectric applications: an ab-initio DFT study10.1088/1402-4896/ad4f2a ↗
37. Computational study of structural, thermoelectric, elastic and optoelectronic properties of new halide perovskites CsRbTeX6 (X = I, Br and Cl) for solar cell applications10.1016/j.inoche.2023.110842 ↗
38. Thermoelectric and optoelectronic properties of novel lead-free halide perovskites CsRbTiX6 (X= I, Br and Cl) for photovoltaic applications10.1016/j.cocom.2022.e00733 ↗
39. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance10.1126/science.aah5557 ↗
40. Overcoming ionic migration in perovskite solar cells through alkali metals10.1016/j.joule.2023.11.011 ↗
41. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
42. Interpretation of rubidium based perovskite recipes toward electronic passivation and ion-diffusion mitigation
43. Influence of the boundaries in the impedance of porous film electrodes10.1039/b001708f ↗
44. Quantification of ionic diffusion in lead halide perovskite single crystals10.1021/acsenergylett.8b00641 ↗
45. Potassium ions as a kinetic controller in ionic double layers for hysteresis free perovskite solar cells10.1039/C9TA07595J ↗
46. Controlled crystallization of CsRb-based multi-cation perovskite using a blended sequential process for high-performance solar cells10.1002/solr.202100050 ↗
47. The role of rubidium in multiple-cation-based high-efficiency perovskite solar cells10.1002/adma.201701077 ↗
48. Rubidium multication perovskite with optimized bandgap for perovskite-silicon tandem with over 26% efficiency10.1002/aenm.201700228 ↗
49. Quantum espresso: a modular and open-source software project for quantum simulations of materials
50. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
51. Strongly constrained and appropriately normed semilocal density functional10.1103/PhysRevLett.115.036402 ↗
52. Libxc: a library of exchange and correlation functionals for density functional theory10.1016/j.cpc.2012.05.007 ↗
53. Novel KXBr3 (X = Ca, Sr, Ba) lead-free halide perovskites for optoelectronic applications: a DFT investigation of mechanical and optoelectronic properties10.1016/j.cocom.2024.e00928 ↗
54. BoltzTraP. A code for calculating band-structure dependent quantities10.1016/j.cpc.2006.03.007 ↗
55. Lattice expansion in hybrid perovskites: effect on optoelectronic properties and charge carrier dynamics10.1021/acs.jpclett.9b02020 ↗
56. Dynamic stabilization of perovskites at elevated temperatures: a comparison between cubic BaFeO3 and vacancy-ordered monoclinic BaFeO2.6710.1103/PhysRevB.106.064308 ↗
57. Exploring the influence of pressure-induced semiconductor-to-metal transition on the physical properties of cubic perovskites FrXCl3 (X= Ge and Sn)10.1016/j.heliyon.2024.e27581 ↗
58. Pressure-driven semiconducting to metallic transition in francium tin trihalides perovskite with improved optoelectronic performance: a DFT study10.1063/5.0207336 ↗
59. Unraveling lead-free Fr-based perovskites FrQCl3 (Q = Ca, Sr) and their pressure induced physical properties: DFT analysis for advancing optoelectronic performance10.1016/j.jpcs.2024.112211 ↗
60. Pressure action on ductility and optoelectronic properties of non-toxic AGeBr3 (A = Cs, K, Na, Rb) perovskites
61. The effect of compressional strain on the physical attributes of Rb3TlCl6 double perovskites: first-principles predictions10.1016/j.mseb.2024.117547 ↗
62. Pressure-induced band gap shifting from ultra-violet to visible spectrum of non-toxic RbCaBr3 cubic perovskite for enhancing optoelectronic applications10.1007/s10904-023-02970-9 ↗
63. ELATE: an open-source online application for analysis and visualization of elastic tensors10.1088/0953-8984/28/27/275201 ↗
64. Responsive metal-organic frameworks and framework materials: under pressure, taking the heat, in the spotlight, with friends10.1021/acs.chemmater.5b00046 ↗
65. Supramolecular mechanics in a metal–organic framework10.1039/c2sc20596c ↗
66. Negative linear compressibility10.1039/C5CP00442J ↗
67. Anisotropic elastic properties of flexible metal-organic frameworks: how soft are soft porous crystals?10.1103/PhysRevLett.109.195502 ↗
68. Exploration of lead-free novel double perovskite halides Na2TlBiX6 (X = Cl, Br, I) for flexible memory devices: using DFT approach
69. Ab initio study of structural, elastic, electronic, optical and thermoelectric properties of cubic Ge-based fluoroperovskites AGeF3 (A = K, Rb and Fr)10.1016/j.ssc.2023.115206 ↗
70. DFT aided comparative screening of mechanical, optoelectronic, and transport properties of double perovskites Cs2ScAuX6 (X = Cl, Br, and I) for green energy applications10.1016/j.inoche.2024.112527 ↗
71. Insights into the Ab-initio calculations: unraveling the structural, electronic, elastic, and optical properties of XSiO3 (X = Hg, Zn)10.1016/j.physb.2024.416169 ↗
72. A DFT study of structural and electronic properties of cubic thallium based fluoroperovskites TlBF3 (B= Ge, Sn, Pb, Zn, Cd, Hg, Mg, Ca, Sr, Ba)10.1016/j.cocom.2022.e00747 ↗
73. First-principles investigation of Cs2TlGaX6 (X = Cl, F) double perovskites: structural and dynamical stability, elastic properties, and optoelectronic characteristics for applications in semiconductor technology10.1007/s11082-024-07199-5 ↗
74. Lead-free perovskites TlGeClxBr3-x (x=0,1,2,3) as promising materials for solar cell application: a DFT study
75. DFT analysis of the electronic, optical, phonon, elastic, and mechanical features of ternary Rb2XS3 (X = Si, Ge, Sn) chalcogenides10.1007/s11082-024-07046-7 ↗
76. First-principles investigation of electronic, elastic, optical and thermoelectric properties of strontium-based anti-perovskite Sr3MN (M= P and As) for potential applications in optoelectronic and thermoelectric devices
77. First-principles study of structural, mechanical, optoelectronic and thermoelectric properties of lead-free Cs2BSnX6 (B = Mg, Cu; X = Cl, Br, I) for photo responsive RRAM devices10.1007/s11082-024-07200-1 ↗
78. First principles calculations on structural, electronic, elastic, optical, and thermoelectric properties of thallium based chloroperovskites TlMCl3 (M = Zn and Cd)10.1016/j.cocom.2022.e00756 ↗
79. Recent progress on solar blind deep ultraviolet photodetectors based on metal halide perovskites10.1039/D4TC01152J ↗
80. Wide-bandgap all-inorganic lead-free perovskites for ultraviolet photodetectors10.1016/j.nanoen.2023.108908 ↗
81. DFT insights into the structural, mechanical, electronic and optical properties of novel InZnCl3 and InCdCl3 chloro-perovskites10.22146/ijc.94870 ↗
82. First principle study of X2GaAgCl6 (X = Cs, Rb) double perovskites: structural, mechanical, vibrational, electronic, optical, SLME, thermoelectric, and thermodynamic properties for solar cell applications10.1007/s11356-024-33556-8 ↗
83. A DFT investigation of Li substitution in CsCaY3 (Y=F, Cl, Br) having admirable optoelectronic characteristics as a viable candidate for photocatalytic water splitting10.1016/j.ijhydene.2024.09.089 ↗
84. Novel Tl2GeX6 (X= Cl, Br) double perovskites for solar cell, optoelectronic, and thermoelectric applications: a DFT investigation10.1016/j.chphi.2024.100749 ↗
85. First-principles investigation of pressure-modulated structural, electronic, mechanical, and optical characteristics of Sr3PX3 (X= Cl, Br) for enhanced optoelectronic application10.1007/s11082-024-07388-2 ↗
86. Investigating the effects of hydrostatic pressure on the physical properties of cubic Sr3BCl3 (B= As, Sb) for improved optoelectronic applications: a DFT study10.1016/j.heliyon.2024.e35855 ↗
87. Theoretical investigation of XSnH3 (X: Rb, Cs, and Fr) perovskite hydrides for hydrogen storage application10.1016/j.ijhydene.2024.03.229 ↗
88. The first principles insights of aluminum-based hydrides for hydrogen storage application10.1016/j.ijhydene.2024.03.180 ↗
89. First-principles analysis of physical properties of the novel calcium-based hydrides for hydrogen storage application10.1016/j.physleta.2024.129443 ↗
90. Structural, electronic, elastic, and optical properties of cubic BaLiX3 (X = F, Cl, Br, or I) perovskites: an ab-initio DFT study10.22146/ijc.83261 ↗
91. Optical properties of photovoltaic organic-inorganic lead halide perovskites10.1021/acs.jpclett.5b01865 ↗
92. Linear optical properties of solids within the full-potential linearized augmented plane wave method10.1016/j.cpc.2006.03.005 ↗
93. Effects of Bi and Mn codoping on the physical properties of barium titanate: investigation via DFT method10.1007/s00339-021-05094-4 ↗
94. Optoelectronic, thermoelectric and 3D-Elastic properties of lead-free inorganic perovskites CsInZrX6 (I, Cl and Br) for optoelectronic and thermoelectric applications10.1088/1402-4896/ad5d25 ↗
95. Study of structural, electronic, mechanical, optical and thermoelectric properties of as based halide-perovskites Ba3AsX3 (X= F, Cl): a first-principles insights10.1016/j.jmrt.2024.06.218 ↗
96. A DFT study of electronic, optical and thermoelectric properties of Ge-halide perovskites CsGeX3 (X = F, Cl and Br)10.1016/j.cocom.2022.e00663 ↗
97. A comprehensive DFT investigation of inorganic halide perovskites GaXCl3 (X = Ca, Sr, and Ba) for optoelectronics application
98. Investigation of heavy thallium perovskites TlGeX3 (X = Cl, Br and I) for optoelectronic and thermoelectric applications: a DFT study
99. Optoelectronic properties of mechanically stable cubic Niobate compounds under hydrostatic pressure: a systematic DFT investigation10.1016/j.physb.2024.416132 ↗
100. Forecasting optical response in lieu of electronic properties of TlCaF3 via halogen substitution for UV filtration: a DFT perspective10.1080/08927022.2024.2351025 ↗