journal article·2025-01

Optimizing the diamond wire sawing of polycrystalline silicon: An experimental approach

Erick Cardoso Costa, Bruno van Bellen, Marcos Odivan Werner, Pedro Córdula de Sousa, Fabio Antonio Xavier

Publisher page

Abstract

This study aims to determine the optimized cutting conditions for diamond wire sawing of polycrystalline silicon (poly-Si) wafers using a laboratory machine-tool that employs continuous cutting movement and reach cutting conditions similar to those in the industry. The experimental cutting was carried out following a central composite design, varying the wire cutting speed (v c) and feed rate (v f). A response surface methodology was employed to find the optimized cutting conditions for minimum surface roughness and subsurface micro-crack depth of the as-sawn poly-Si wafer. The results showed that the as-sawn poly-Si exhibited ductile scratches and fragile fractures in its surface morphology, with high v c and low v f resulting in a smooth surface. The response surfaces indicated that increasing v f led to increased R a and R q values, while increasing v c reduced them. Median micro-cracks were slightly inclined in the subsurface region, with the response surface indicating that their depth reduced with increasing v c and decreasing v f. The v f/v c ratio significantly affected surface integrity, with a lower v f/v c ratio being more suitable for reaching a smoother surface and shallower subsurface damage. The following material removal mechanisms was identified: optimal ductile region, ductile-to-brittle transition, brittle-ductile mixture region, and brittle region. Simulations using the response surface models indicated minimum values of R a = 0.35 μm, R q = 0.48 μm and SSD = 3.29 μm. Thus, this study provides a processing parameter window for diamond wire sawing of poly-Si wafers, which could be useful for both the photovoltaic and microelectronic industries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Solar grade silicon feedstock supply for PV industry10.1016/S0927-0248(01)00146-5 ↗
2. Research progress on solar thermal
3. Economic measurements of polysilicon for the photovoltaic industry: market competition and manufacturing competitiveness10.1109/JPHOTOV.2014.2388076 ↗
4. Bernreuter Research. Polysilicon Price Trend n.d. https://www.bernreuter.com/polysilicon/price-trend/(accessed July 15, 2024).
5. Wolfe · 2017 · vol. 1
6. Study on surface integrity and ductile cutting of PV polycrystalline silicon and wear mechanisms of electroplated diamond wire10.1007/s00170-022-09990-8 ↗
7. Wire sawing technology: a state-of-the-art review10.1016/j.precisioneng.2015.08.008 ↗
8. Itrpv · 2022 · 13th Editi · 53
9. Experimental investigation of the sawn surface of monocrystalline silicon cut by endless diamond wire sawing10.1590/1980-5373-mr-2020-0013 ↗
10. Recent advances in precision diamond wire sawing monocrystalline silicon
11. The state of the art of wire sawing-based hybrid cutting technology: a review
12. Surface formation, morphology, integrity and wire marks in diamond wire slicing of mono-crystalline silicon in the photovoltaic industry
13. Experimental study on slicing photovoltaic polycrystalline silicon with diamond wire saw10.1016/j.mssp.2019.104779 ↗
14. Fabrication of thin resin-bonded diamond wire and its application to ductile-mode wire sawing of mono-crystalline silicon10.1016/j.mssp.2021.105665 ↗
15. Experimental investigation on the machining characteristics of fixed-free abrasive combined wire sawing PV polycrystalline silicon solar cell10.1007/s00170-020-05099-y ↗
16. Experimental research on combined processing of diamond wire saw and molybdenum twisted wire10.1007/s00170-018-3010-x ↗
17. Measurement and simulation calculation of wire bow angle during the diamond wire saw process10.1007/s00170-022-09233-w ↗
18. Grain flash temperatures in diamond wire sawing of silicon10.1007/s00170-021-07298-7 ↗
19. Tribology International on the deformation mechanism and dislocations evolution in monocrystalline silicon under ramp nanoscratching10.1016/j.triboint.2024.109395 ↗
20. Influence of microstructure on the cutting behaviour of silicon10.1016/j.actamat.2015.11.046 ↗
21. Crack damage control for diamond wire sawing of silicon: the selection of processing parameters10.1016/j.mssp.2022.106838 ↗
22. A new method of determining the slicing parameters for fixed diamond wire saw10.1016/j.mssp.2020.105252 ↗
23. Surface roughness optimization in processing SiC monocrystal wafers by wire saw machining with ultrasonic vibration10.1177/0954405413508116 ↗
24. Multi-objective optimization of energy consumption, surface roughness, and material removal rate in diamond wire sawing for monocrystalline silicon wafer10.1007/s00170-023-12335-8 ↗
25. A comprehensive study on slicing processes optimization of silicon ingot for photovoltaic applications10.1016/j.solener.2017.12.040 ↗
26. Determination of cutting parameters for silicon wafer with a Diamond Wire Saw using an artificial neural network10.1016/j.solener.2017.04.022 ↗
27. Effect of cutting parameters on surface integrity of monocrystalline silicon sawn with an endless diamond wire saw10.1016/j.solener.2020.07.018 ↗
28. Experimental investigation of the machining characteristics in diamond wire sawing of unidirectional CFRP10.1007/s00170-021-07146-8 ↗
29. Experimental investigation on the surface formation mechanism of NdFeB during diamond wire sawing10.3390/ma16041521 ↗
30. Analysis of crack-free surface generation of photovoltaic polysilicon wafer cut by diamond wire saw10.1016/j.solener.2021.01.009 ↗
31. Characterization of electroplated diamond wires and the resulting workpiece quality in silicon sawing10.1016/j.jmatprotec.2019.116390 ↗
32. Manufacturing of looped diamond wire by upset welding and heat treatment of weld joint based on joule effect
33. Montgomery · 2014
34. Influence of single diamond wire sawing of photovoltaic monocrystalline silicon on the feed force, surface roughness and micro-crack depth10.1016/j.mssp.2022.106525 ↗
35. Numerical modeling of a electroplated diamond wire for crystalline silicon machining
36. Marinescu · 2015
37. Mapping ductile-to-fragile transition and the effect of tool nose radius in diamond turning of single-crystal silicon10.1007/s00170-021-08528-8 ↗
38. Analytical model for the light trapping effect on ZnO:Al/c-Si/SiGe/c-Si solar cells with an optimized design
39. Role of a thin interfacial oxide layer and optimized electrodes in improving the design of a Graphene/n-Si MSM photodetector10.1016/j.spmi.2021.107121 ↗
40. On the mechanical behavior of the sintered Nd-Fe-B permanent magnet during diamond scratching10.1016/j.jmapro.2023.03.060 ↗
41. Material removal and surface generation mechanisms in diamond wire sawing of silicon crystal10.1016/j.mssp.2019.104642 ↗
42. Fracture strength of silicon wafers sawn by fixed diamond wire saw10.1016/j.solener.2017.08.063 ↗
43. Fracture strength of photovoltaic silicon wafers cut by diamond wire saw based on half-penny crack system10.1016/j.engfracmech.2021.107717 ↗
44. Effect of crystal plane orientation on the friction-induced nanofabrication on monocrystalline silicon10.1186/1556-276X-8-137 ↗
45. Effect of grit shape and crystal structure on damage in diamond wire scribing of silicon10.1111/jace.14732 ↗
46. Influence of diamond wire saw slicing parameters on (010) lattice plane beta-gallium oxide single crystal wafer10.1016/j.mssp.2021.105939 ↗
47. Prediction of subsurface microcrack damage depth based on surface roughness in diamond wire sawing of monocrystalline silicon10.3390/ma17030553 ↗