Improving the photovoltaic performance of CIGS solar cells with the modified 3-stage co-evaporation process
Source abstract
Abstract
The 3-stage co-evaporation process has been adopted as one of the standard deposition techniques for developing high efficiency CuIn 1-xGa xSe 2 (CIGS) thin film solar cells. This method often results in a double-graded [Ga]/([Ga] + [In]) or x value, leading to a double-graded bandgap in the CIGS films. The main challenge is to increase open-circuit voltage ( V oc) without losing short-circuit current density ( J sc ) of the devices. To achieve this goal without extra elemental sources or processes during fabrication, the standard 3-stage co-evaporation process could be modified by adjusting the deposition rate of Ga in the 1st and 3rd stages to enhance the double-graded profile of x. In the 1st stage, x 1 is varied in the range of 0.37–0.60, whereas x 3 is varied in the range of 0.15–0.37 in the 3rd stage. This is to be compared with our reference 3-stage process using constant x 1 = x 3 = 0.37. The effects of the x values on the photovoltaic properties of the CIGS devices and the elemental depth profiles of the CIGS absorber have been examined. In this work, the champion device has a maximum efficiency of 17.61 %, a V oc of 698.4 mV, a J sc of 33.81 mA/cm 2 and a fill factor ( FF) of 76.12 %. This was achieved by using x 1 = 0.55 and x 3 = 0.25. These parameters demonstrate a significant beneficial improvement over reference 3-stage process and result in the notch position (the minimum of the x value) being approximately 500–800 nm below the surface of the CIGS films.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Green · 2023 · 651
2. Improved Cu(In,Ga)(S,Se)2 thin film solar cells by surface sulfurization10.1016/S0927-0248(97)00054-8 ↗
3. Influences of sulfurization on performances of Cu(In,Ga)(Se,S)2 cells fabricated based on the method of sputtering CIGSe quaternary target10.1016/j.jallcom.2019.03.355 ↗
4. Impacts of surface sulfurization on Cu(In1-x,Gax)Se2 thin-film solar cells10.1002/pip.2554 ↗
5. Reduction of point defects and Cu surface composition in Cu(In,Ga)Se2 film by Se annealing with a NaF overlayer at intermediate temperatures10.1016/j.cap.2017.03.009 ↗
6. The role of Na incorporation in the low-temperature processed CIGS thin film solar cells using post deposition treatment10.1016/j.jallcom.2015.10.181 ↗
7. Enhancing efficiency of Cu(In, Ga)Se2 solar cells on flexible stainless steel foils using NaF co-evaporation10.1016/j.solener.2013.03.010 ↗
8. Effect of potassium fluoride post-deposition treatment on Cu(In,Ga)Se2 thin films and solar cells fabricated onto sodalime glass substrates10.1016/j.solmat.2016.06.023 ↗
9. Influence of alkali element post-deposition treatment on the performance of the CIGS solar cells on flexible stainless steel substrates10.1016/j.matlet.2021.130410 ↗
10. Effects of KF and RbF post deposition treatments on the growth of the CdS buffer layer on CIGS thin films - a comparative study10.1016/j.solmat.2019.109997 ↗
11. Analysis of a novel method of alkalis treatment: effect on energy band optimization and carrier recombination at the grain boundary10.1016/j.solmat.2022.112007 ↗
12. Engineered Cu(InGa)Se2 thin films through CaF2 post-deposition treatment for enhancing solar cell performance10.1016/j.jallcom.2018.07.050 ↗
13. Surface modifications of CIGS absorbers and their effects on performances of CIGS solar cells10.1016/j.ceramint.2021.08.365 ↗
14. Band offsets and optical bowings of chalcopyrites and Zn-based II-VI alloys10.1063/1.359901 ↗
15. Study of the effect of gallium grading in Cu(In,Ga)Se210.1016/S0040-6090(99)00845-7 ↗
16. The effect of Ga-grading in CIGS thin film solar cells10.1016/j.tsf.2004.11.080 ↗
17. High efficiency Cu(In,Ga)Se2-based solar cells: Processing of novel absorber structures
18. Ga-grading profiles formed by incorporation of gallium into Cu(In1-xGax)Se2 absorber thin films10.1016/j.apsusc.2012.05.065 ↗
19. Relationship between bandgap grading and carrier recombination for Cu(In,Ga)Se2-based solar cells10.7567/JJAP.57.08RC08 ↗
20. Enhancing photocurrent of Cu(In,Ga)Se2 solar cells with actively controlled Ga grading in the absorber layer10.1016/j.nanoen.2019.05.052 ↗
21. Effect of the double grading on the internal electric field and on the carrier collection in CIGS solar cells10.1016/j.solmat.2020.110948 ↗
22. Crystal growth and diffusion in Cu(In, Ga)Se2 chalcopyrite thin films10.1016/0040-6090(93)90461-W ↗
23. Probing diffusion of in and Ga in CuInSe2/CuGaSe2 bilayer thin films by x-ray diffraction10.1016/j.jcrysgro.2015.09.010 ↗
24. Diffusion of indium and gallium in Cu(In,Ga)Se2 thin film solar cells10.1016/S0022-3697(03)00127-6 ↗
25. Effects of the surface Cu2-xSe phase on the growth and properties of CulnSe2 films10.1063/1.123639 ↗
26. Influence of Cu-atomic ratio in the 3-stage deposition technique on the efficiency of CuIn1-xGaxSe solar cells10.1088/1742-6596/2431/1/012047 ↗
27. In situ deposition rate monitoring during the three-stage-growth process of Cu(In,Ga)Se2 absorber films10.1016/S0040-6090(03)00234-7 ↗
28. In situ monitoring of the growth of Cu(In,Ga)Se2 thin films10.1016/j.solmat.2006.06.038 ↗
29. Impact of Ga/(In + Ga) profile in Cu(In,Ga)Se2 prepared by multi-layer precursor method on its cell performance10.1016/j.tsf.2014.01.009 ↗
30. Effects of Ga contents on properties of CIGS thin films and solar cells fabricated by co-evaporation technique10.1016/j.cap.2009.11.082 ↗
31. Effect of Ga content and growth temperature on Cu(In,Ga)Se2 thin film deposited on heat-resistant glass substrates10.1002/pssc.201200833 ↗
32. Characterization of Cu(In,Ga)Se2 (CIGS) films with varying gallium ratios10.1016/j.jallcom.2015.09.006 ↗
33. Wide bandgap Cu(In, Ga)Se2 solar cells with improved energy conversion efficiency10.1002/pip.2244 ↗
34. Consequences of grain boundary barriers on electrical characteristics of CIGS solar cells10.1016/j.solmat.2023.112252 ↗
35. Influence of the Ga-content on the bulk defect densities of Cu(In,Ga)Se210.1016/S0040-6090(00)01710-7 ↗
36. Influence of grain boundary modification on limited performance of wide bandgap Cu(In,Ga)Se2 solar cells10.1063/1.4890001 ↗