journal article·2024-02

Terahertz optical Hall effect determination of carrier concentrations in component layers within low bandgap tin–lead halide perovskite photovoltaics and device simulation

Madan K. Mainali, Prakash Uprety, Zhaoning Song, Changlei Wang, Indra Subedi, Biwas Subedi, Kiran Ghimire, Maxwell M. Junda, Yanfa Yan, Nikolas J. Podraza

Publisher page

Abstract

Carrier concentration ( N) of indium tin oxide (ITO), poly (3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), and low bandgap perovskite (FASnI 3) 0.6(MAPbI 3) 0.4 in the photovoltaic device configuration are determined using terahertz (THz) spectral range optical Hall effect measurements and analysis. Unlike direct electrical Hall effect, this technique is non-invasive as it does not need any direct electrical contacts and is able to probe free carrier transport properties of individual films inside the device stack. A modified Drude model is implemented to address the dominating free carrier absorption in the THz spectral range. N of the ITO, PEDOT:PSS, and (FASnI 3) 0.6(MAPbI 3) 0.4 are determined to be (2.8 ± 0.6) × 10 20 cm -3, (2.6 ± 0.8) × 10 22 cm -3, and (1.5 ± 0.1) × 10 18 cm -3, respectively. PV device performance is simulated with SCAPS employing the findings from optical Hall measurements. Open circuit voltage ( V OC), short circuit current ( J SC), fill factor ( FF), power conversion efficiency ( PCE) are found to be 0.865 V, 29.2 mAcm -2, 66.7%, and 16.8% respectively which are within 3% of corresponding experimentally measured values. These optically measured N serve as essential parameters for device modeling to understand its physics in device performance and to optimize PCE; consistency between simulated and experimental device performance parameters using these values supports optical Hall effect as a reliable technique to extract electronic transport properties.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Optical Hall effect—model description: tutorial10.1364/JOSAA.33.001553 ↗
2. Generalized far-infrared magneto-optic ellipsometry for semiconductor layer structures: determination of free-carrier effective-mass, mobility, and concentration parameters in n-type GaAs10.1364/JOSAA.20.000347 ↗
3. Terahertz optical-Hall effect for multiple valley band materials: n-type silicon10.1016/j.tsf.2010.11.087 ↗
4. Cavity-enhanced optical Hall effect in two-dimensional free charge carrier gases detected at terahertz frequencies10.1364/OL.40.002688 ↗
5. In-situ terahertz optical Hall effect measurements of ambient effects on free charge carrier properties of epitaxial graphene10.1038/s41598-017-05333-w ↗
6. Terahertz magneto-optic generalized ellipsometry using synchrotron and blackbody radiation10.1063/1.2209968 ↗
7. Terahertz ellipsometry and terahertz optical-Hall effect10.1016/j.tsf.2010.11.069 ↗
8. Efficient two-terminal all-perovskite tandem solar cells enabled by high-quality low-bandgap absorber layers10.1038/s41560-018-0278-x ↗
9. Subedi · 2020
10. Uprety · 2019
11. Spectroscopic ellipsometry determination of optical and electrical properties of aluminum doped zinc oxide10.1016/j.apsusc.2017.01.139 ↗
12. Optical and electrical properties of H2 plasma-treated ZnO films prepared by atomic layer deposition using supercycles10.1016/j.mssp.2018.05.008 ↗
13. Uprety · 2017 · 3468
14. Determination of conductivity anisotropy and the role of doping in single walled carbon nanotube thin films with THz spectroscopic ellipsometry10.1016/j.carbon.2017.12.022 ↗
15. Optical and electronic transport properties of epitaxial InGaAs and InAlAs in multilayer stacks
16. Photogenerated carrier transport properties in Silicon photovoltaics10.1038/s41598-019-55173-z ↗
17. Optical Hall effect of PV device materials10.1109/JPHOTOV.2018.2869540 ↗
18. Intriguing optoelectronic properties of metal halide perovskites10.1021/acs.chemrev.6b00136 ↗
19. Perovskite solar cells: an emerging photovoltaic technology10.1016/j.mattod.2014.07.007 ↗
20. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
21. NREL efficiency chart, accessed on 29th September 2023, https://www.nrel.gov/pv/cell-efficiency.html.
22. Low-bandgap mixed tin–lead iodide perovskites with reduced methylammonium for simultaneous enhancement of solar cell efficiency and stability10.1038/s41560-020-00692-7 ↗
23. Monolithic all-perovskite tandem solar cells with 24.8% efficiency exploiting comproportionation to suppress Sn (ii) oxidation in precursor ink10.1038/s41560-019-0466-3 ↗
24. Simplified interconnection structure based on C60/SnO2-x for all-perovskite tandem solar cells10.1038/s41560-020-0657-y ↗
25. All-perovskite tandem solar cells with 24.2% certified efficiency and area over 1 cm2 using surface-anchoring zwitterionic antioxidant10.1038/s41560-020-00705-5 ↗
26. The relative impact of toxic heavy metals (THMs)(arsenic (As), cadmium (Cd), chromium (Cr)(VI), mercury (Hg), and lead (Pb)) on the total environment: an overview10.1007/s10661-019-7528-7 ↗
27. Mixed-halide Pb-Sn binary perovskite films with various Sn-content for Pb-reduced solar cells10.1016/j.matlet.2018.05.047 ↗
28. “Unleaded” perovskites: status quo and future prospects of tin‐based perovskite solar cells10.1002/adma.201803230 ↗
29. Low-bandgap mixed tin–lead iodide perovskite absorbers with long carrier lifetimes for all-perovskite tandem solar cells10.1038/nenergy.2017.18 ↗
30. How transport layer properties affect perovskite solar cell performance: insights from a coupled charge transport/ion migration model10.1039/C8EE01576G ↗
31. Charge transport layers limiting the efficiency of perovskite solar cells: how to optimize conductivity, doping, and thickness10.1021/acsaem.9b00856 ↗
32. Fabrication of efficient low-bandgap perovskite solar cells by combining formamidinium tin iodide with methylammonium lead iodide10.1021/jacs.6b08337 ↗
33. Lead-free organic–inorganic tin halide perovskites for photovoltaic applications10.1039/C4EE01076K ↗
34. Effects of intrinsic and atmospherically induced defects in narrow bandgap (FASnI3) x (MAPbI3) 1− x perovskite films and solar cells10.1063/1.5126867 ↗
35. Materials, methods and strategies for encapsulation of perovskite solar cells: from past to present10.1016/j.rser.2021.111608 ↗
36. Encapsulation of perovskite solar cells for enhanced stability: structures, materials and characterization10.1016/j.jpowsour.2020.229313 ↗
37. Variable-wavelength frequency-domain terahertz ellipsometry10.1063/1.3297902 ↗
38. Advances in multichannel spectroscopic ellipsometry10.1016/S0040-6090(97)00764-5 ↗
39. Rotating-compensator multichannel ellipsometry: applications for real time Stokes vector spectroscopy of thin film growth10.1063/1.1148844 ↗
40. Quantifying the accuracy of ellipsometer systems10.1002/pssc.200777755 ↗
41. Optical, microstructural and vibrational properties of sol–gel ITO films10.1016/j.optmat.2021.110999 ↗
42. Unraveling the enhanced electrical conductivity of PEDOT: PSS thin films for ITO-free organic photovoltaics10.1109/JPHOT.2014.2319090 ↗
43. Complete assignment of the vibrational modes of C 60 by inelastic neutron scattering spectroscopy and periodic-DFT10.1039/c0cp02956d ↗
44. Optical properties of soda lime float glass from 3 mm to 148 nm (0.41 meV to 8.38 eV) by spectroscopic ellipsometry10.1116/1.5024390 ↗
45. Kemp · 2003 · 44
46. High-resolution terahertz spectroscopy of water vapor with different humidity levels under normal atmospheric conditions and in a vapor-liquid coexistence at reduced pressure
47. Fujiwara · 2007
48. Frequency-dependent complex conductivities and dielectric responses of indium tin oxide thin films from the visible to the far-infrared10.1109/JQE.2010.2063696 ↗
49. Indium-oxide polymorphs from first principles: quasiparticle electronic states10.1103/PhysRevB.77.155107 ↗
50. Electronic conduction properties of indium tin oxide: single-particle and many-body transport10.1088/0953-8984/26/34/343201 ↗
51. High mobility indium tin oxide thin film and its application at infrared wavelengths: model and experiment10.1364/OE.26.022123 ↗
52. Yamashita · 2011 · 1
53. Improved functionality of PEDOT: PSS thin films via graphene doping, fabricated by ultrasonic substrate vibration-assisted spray coating10.1016/j.synthmet.2016.11.009 ↗
54. Facile fabrication of PEDOT:PSS/polythiophenes bilayered nanofilms on pure organic electrodes and their thermoelectric performance10.1021/am404183v ↗
55. Reducing saturation‐current density to realize high‐efficiency low‐bandgap mixed tin–lead halide perovskite solar cells
56. Small photocarrier effective masses featuring ambipolar transport in methylammonium lead iodide perovskite: a density functional analysis10.1021/jz4023865 ↗
57. First-principles hybrid functional study of the electronic structure and charge carrier mobility in perovskite CH3NH3SnI310.1088/1674-1056/25/10/107202 ↗
58. Ultrapure C 60 field-effect transistors and the effects of oxygen exposure10.1063/1.1883327 ↗
59. Insight into doping efficiency of organic semiconductors from the analysis of the density of states in n-doped C60 and ZnPc10.1038/s41563-018-0030-8 ↗
60. Electrical and optical properties of pristine and polymerized fullerenes10.1134/1.1356145 ↗
61. Edward · 1985
62. Structural and optical properties of indium tin oxide (ITO) thin films with different compositions prepared by electron beam evaporation10.1016/j.vacuum.2009.11.017 ↗
63. The temperature-dependent microstructure of PEDOT/PSS films: insights from morphological, mechanical and electrical analyses10.1039/C4TC01593B ↗
64. Effect of deep-level defect density of the absorber layer and n/i interface in perovskite solar cells by SCAPS-1D10.1016/j.rinp.2019.102839 ↗
65. Device simulation of 17.3% efficient lead-free all-perovskite tandem solar cell10.1016/j.solener.2020.01.006 ↗
66. Exploring the effects of interfacial carrier transport layers on device performance and optoelectronic properties of planar perovskite solar cells10.1039/C7TC02822A ↗
67. Understanding the impact of C60 at the interface of perovskite solar cells via drift-diffusion modeling10.1063/1.5068690 ↗
68. Burgelman · 2016
69. Optical and electronic losses arising from physically mixed interfacial layers in perovskite solar cells10.1021/acsami.0c16364 ↗
70. Solar cell fill factors: general graph and empirical expressions10.1016/0038-1101(81)90062-9 ↗
71. PV Education, accessed on 29th September 2023, https://www.pveducation.org/pvcdrom/solar-cell-operation/series-resistance.