Study on the process of micro-arc oxidation TiO2 film for rapid detection of triethylamine
Source abstract
Abstract
By taking into account the severe limitations of the triethylamine gas sensors, including the long response recovery time and the poor selectivity, it is still necessary to design and manufacture TEA-based gas sensors with improved sensing performance. Along these lines, the morphological operations on semiconductor metal oxide gas-sensitive materials are considered to be an effective method to enhance their sensing capabilities. Therefore, in this work, the micro-arc oxidation technology was used to prepare a TiO 2 sensitive film for the detection of the TEA gas. Interestingly, the process parameters of the micro-arc oxidation mechanism have an important influence on the growth process of the TiO 2 film. Consequently, choosing the appropriate current density, oxidation time, pulse width and electrolyte concentration characteristics is beneficial to control both the morphology and structure of the TiO 2 film. The coupling relationship between the process parameters was thoroughly studied by performing an orthogonal array tests. More specifically, the optimum preparation conditions were the following: current density of 0.65A/cm 2, oxidation time of 4min, a pulse width of 1250 ms and electrolyte concentration of 7 g/L. The characterization of the micro-arc TiO 2 sensitive film revealed that the surface of the film showed a large number of heterogeneous pore structures (with a diameter of about 2–3 μm) and some nano-sized pores, while the film thickness was 30 μm and exhibited a good continuity. The acquired gas sensing results indicate that the optimized micro-arc TiO 2 film possesses a fast response and recovery (5 s, 52 s) to 100 ppm TEA and a detection limit of 0.9 ppm. Our work provides fruitful insights for the preparation of TEA gas-sensitive materials by enforcing the micro-arc oxidation technology.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Highly sensitive and selective triethylamine gas sensor based on Ag nanoparticles-decorated MoO3 nanobelts
2. Highly sensitive and selective triethylamine gas sensor based on porous SnO2/Zn2SnO4 composites10.1016/j.snb.2018.03.044 ↗
3. Sn doping effect on NiO hollow nanofibers based gas sensors about the humidity dependence for triethylamine detection10.1016/j.snb.2021.129971 ↗
4. Rational interaction between the aimed gas and oxide surfaces enabling high-performance sensor: the case of acidic -MoO3 nanorods for selective detection of triethylamine10.1016/j.jallcom.2018.12.349 ↗
5. Excellent triethylamine sensor with ultra-fast response and recovery time based on bulk Bi2WO6 material10.1016/j.matlet.2020.129162 ↗
6. Near room-temperature triethylamine sensor constructed with CuO/ZnO P-N heterostructural nanorods directly on flat electrode10.1016/j.snb.2015.10.108 ↗
7. NASICON-based gas sensor utilizing MMnO3 (M: Gd, Sm, La) sensing electrode for triethylamine detection10.1016/j.snb.2019.05.062 ↗
8. Triethylamine sensing with a mixed potential sensor based on Ce0.8Gd0.2O1.95 solid electrolyte and La1-xSrxMnO3 (x=0.1, 0.2, 0.3) sensing electrodes10.1016/j.snb.2020.128830 ↗
9. Single-atom silver loaded on tungsten oxide with oxygen vacancies for high performance triethylamine gas sensors10.1039/D1TA00694K ↗
10. Platinum-supported cerium-doped indium oxide for highly sensitive triethylamine gas sensing with good antihumidity10.1021/acsami.0c12363 ↗
11. Enhanced gas sensing by individual SnO2 nanowires and nanobelts functionalized with Pd catalyst particles10.1021/nl050082v ↗
12. Ammonia room-temperature gas sensor using different TiO2 nanostructures10.1007/s10854-021-06269-8 ↗
13. Fast triethylamine gas sensing response properties of Ho-doped SnO2 nanoparticles
14. The H2 sensing properties of facets-dependent Pd nanoparticles-supported ZnO nanorods10.1039/C8DT01980K ↗
15. Fabrication of C-doped WOinf3/inf nanoparticle cluster arrays from PS-b-P4VP for room temperature Hinf2/inf sensing10.1039/C5DT01369K ↗
16. Triethylamine gas sensor based on Pt-functionalized hierarchical ZnO microspheres10.1016/j.snb.2020.129425 ↗
17. Lu · 2020
18. Porous ZnSnO3 nanocubes as a triethylamine sensor10.1016/j.snb.2021.129869 ↗
19. Superior triethylamine detection at room temperature by {-112} faceted WO3 gas sensor10.1016/j.jhazmat.2019.120876 ↗
20. Fabrication, characterization and enhanced sensing performance of graphene-TiO2 gas sensor device10.1007/s10854-017-6685-0 ↗
21. Adverse effect of substrate surface impurities on O2 sensing properties of TiO2 gas sensor operating at high temperature10.1016/j.ceramint.2017.01.130 ↗
22. Highly sensitive and selective H2S gas sensor based on TiO2 thin films10.1016/j.apsusc.2021.149281 ↗
23. NH3 gas sensing performance of ternary TiO2/SnO2/WO3 hybrid nanostructures prepared by ultrasonic-assisted sol-gel method10.1007/s10854-018-9283-x ↗
24. Acetone sensing applications of Ag modified TiO2 porous nanoparticles synthesized via facile hydrothermal method10.1016/j.apsusc.2020.147383 ↗
25. Design and construction of nanostructure TiO2 thin film gas sensor prepared by R.F magnetron sputtering technique
26. Elaboration and characterization of TiO2 coatings produced by Micro-arc oxidation process, innovative manufacturing engineering and energy (IManEE 2019) - "50 Years of higher technical education at the university of Pitesti
27. Microstructure and photocatalytic property of TiO2 and Fe3 +:TiO2 films produced by micro-arc oxidation10.1016/j.surfcoat.2017.02.043 ↗
28. 2020
29. Wang · 2021
30. Study of the effect of current pulse frequency on Ti-6Al-4V alloy coating formation by micro arc oxidation10.3390/ma12233983 ↗
31. Investigation on entrance mechanism of calcium and magnesium into micro-arc oxidation coatings developed on Ti-6Al-4V alloys10.1016/j.surfcoat.2019.124951 ↗
32. Design and verification of humidity sensors based on magnesium oxide micro-arc oxidation film layers10.3390/s20061736 ↗
33. High-sensitivity, high-selectivity, and fast-recovery-speed triethylamine sensor based on ZnO micropyramids prepared by molten salt growth method10.1016/j.jallcom.2016.11.380 ↗
34. TiO2/ZnCo2O4 porous nanorods: synthesis and temperature-dependent dual selectivity for sensing HCHO and TEA10.1016/j.snb.2020.128461 ↗
35. TiO2/SnO2 and TiO2/CuO thin film nano-heterostructures as gas sensors10.1016/j.apsusc.2019.02.139 ↗
36. Synthesis and triethylamine sensing properties of mesoporous -Fe2O3 microrods10.1016/j.matlet.2016.04.209 ↗
37. Fabrication of 1D Zn2SnO4 nanowire and 2D ZnO nanosheet hybrid hierarchical structures for use in triethylamine gas sensors10.1016/j.snb.2019.04.009 ↗
38. Rational design of Au/Co3O4-functionalized W18O49 hollow heterostructures with high sensitivity and ultralow limit for triethylamine detection10.1016/j.snb.2018.12.119 ↗
39. Controllable preparation of faceted Co3O4 nanocrystals@MnO2 nanowires shish-kebab structures with enhanced triethylamine sensing performance
40. Needle-shaped WO3Nanorods for triethylamine gas sensing10.1021/acsanm.0c01731 ↗
41. In-situ generated TiO2/-Fe2O3 heterojunction arrays for batch manufacturing of conductometric acetone gas sensors10.1016/j.snb.2021.129926 ↗
42. A novel sensor for fast detection of triethylamine based on rutile TiO2 nanorod arrays10.1016/j.snb.2014.08.092 ↗
43. Highly sensitive and low working temperature detection of trace triethylamine based on TiO2 nanoparticles decorated CuO nanosheets sensors
44. Preparation of anatase/rutile TiO2/SnO2 hollow heterostructures for gas sensor10.1016/j.jallcom.2018.08.035 ↗