CH 3 NH 3 PbBr 3 nanocubes-array for solar cell application
Source abstract
Abstract
Abstract Methyl-ammonium lead bromide (MAPbBr3) is currently studying due to its potential application to high open circuit voltage photovoltaic device. Due to the limited solubility of methyl ammonium bromide (MABr) in iso-propyl alcohol (IPA), the MAPbBr3 was only fabricated by one step (1-step) spin coating process. In this article, we alternatively used ethanol and methanol as solvent to dissolve MABr to fabricate MAPbBr3 films by two steps (2-steps) spin coating process. As a result, we observed a dense, closed stacked and aligned perovskite nanocubes array using a varying concentration of MABr and waiting time. Our best device with an architecture of FTO/TiO2/MAPbBr3/Spiro-OMeTAD/Au shows a current density of 9.31 mA/cm2, open circuit voltage of 1.05 V, and fill factor of 0.58 with a power conversion efficiency of 5.70%. We were optimistic that these MAPbBr3 nanocube arrays would be applicable to solar cell as well as other optoelectronic devices such as photodetector, light emitting diode and X-ray scintillator.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Planar CH3NH3PbBr3 hybrid solar cells with 10.4% power conversion efficiency, fabricated by controlled crystallization in the spin-coating process10.1002/adma.201403140 ↗
3. Highly stable and efficient solid-state solar cells based on methylammonium lead bromide (CH3NH3PbBr3) perovskite quantum dots10.1038/am.2015.86 ↗
4. Light-induced increase of electron diffusion length in a p–n junction type CH3NH3PbBr3 perovskite solar cell10.1021/acs.jpclett.5b00889 ↗
5. Type-inversion as a working mechanism of high voltage MAPbBr3(Cl)-based halide perovskite solar cells10.1039/C6CP08392G ↗
6. Cesium enhances long-term stability of lead bromide perovskite-based solar cells10.1021/acs.jpclett.5b02597 ↗
7. CH3NH3PbBr3-CH3NH3PbI3 perovskite–perovskite tandem solar cells with exceeding 2.2 v open circuit voltage10.1002/adma.201501629 ↗
8. Excitonic feature in hybrid perovskite CH3NH3PbBr3 single crystals10.1246/cl.150204 ↗
9. Methylammonium lead bromide perovskite-based solar cells by vapor-assisted deposition10.1021/jp512936z ↗
10. Room temperature fabrication of CH3NH3PbBr3 by anti-solvent assisted crystallization approach for perovskite solar cells with fast response and small J-V hysteresis10.1016/j.nanoen.2015.08.023 ↗
11. Controlled growth of MAPbBr3 single crystal: understanding the growth morphologies of vicinal hillocks on (100) facet to form perfect cubes10.1007/s10853-017-0995-8 ↗
12. Solution-grown monocrystalline hybrid perovskite films for hole-transporter-free solar cells10.1002/adma.201506292 ↗
13. Carbon nanotubes as an efficient hole collector for high voltage methylammonium lead bromide perovskite solar cells10.1039/C5NR06177F ↗
14. Exploring the limiting open-circuit voltage and the voltage loss mechanism in planar CH3NH3PbBr3 perovskite solar cells10.1002/aenm.201600132 ↗
15. Synthesis of perfectly oriented and micrometer-sized MAPbBr3 perovskite crystals for thin-film photovoltaic applications10.1021/acsenergylett.6b00050 ↗
16. The controlling mechanism for potential loss in CH3NH3PbBr3 hybrid solar cells10.1021/acsenergylett.6b00215 ↗
17. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes10.1126/science.aad1818 ↗
18. Efficient perovskite light-emitting diodes featuring nanometre-sized crystallites10.1038/nphoton.2016.269 ↗
19. Simple and efficient green-light-remitting diodes based on thin organolead bromide perovskite films via tuning precursor ratios and post-annealing temperature10.1021/acs.jpclett.6b02160 ↗
20. High-performance perovskite light-emitting diodes via morphological control of perovskite films10.1039/C5NR05604G ↗
21. X-ray scintillation in lead halide perovskite crystals10.1038/srep37254 ↗
22. Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals10.1038/nphoton.2016.41 ↗
23. Enhanced optoelectronic performance on the (110) lattice plane of an MAPbBr3 single crystal10.1021/acs.jpclett.6b02812 ↗
24. High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization10.1038/ncomms8586 ↗
25. Enhanced emissive and lasing characteristics of nano-crystalline MAPbBr3 films grown via anti-solvent precipitation10.1063/1.4964417 ↗
26. Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells10.1038/nnano.2014.181 ↗
27. 15.76% efficiency perovskite solar cells prepared under high relative humidity: importance of PbI2 morphology in two-step deposition of CH3NH3PbI310.1039/C5TA00658A ↗
28. Moderate temperature processed solar cell with record high Voc of 1.61V and FF of 0.77 based on solvent annealed CH3NH3PbBr3/ICBA active layer10.1039/C5NR07739G ↗
29. B.D. Cullity, Elements of X Ray Diffraction, Addison-Wesley Publishing Company, Inc.