journal article·2024-05

Investigation of high-pressure effect on the physical properties of FrNBr3 (N Ca, Sr) non-toxic halide perovskites

Ovijit Das, Mohammad Nazmul Hasan, Pallab Kumar Karmaker, Md Saiduzzaman, Minhajul Islam

Publisher page

Abstract

Utilizing ab-initio modeling, this study analyzes the possibility of replacing Lead with Francium halide perovskite for use in potential photovoltaic or optoelectronic device applications. Density functional theory is employed to estimate the structural, electronic, bonding, optical, anisotropic elastic, and mechanical characteristics of FrNBr 3 (N Ca, Sr) at various hydrostatic stresses scaling from 0 to 80 GPa. The calculation of the tolerance factor validates the structural stability. At 0 GPa pressure, the computed lattice constants for FrCaBr 3 and FrSrBr 3 are 5.78 Å (5.38 Å) and 6.03 Å (5.62 Å), respectively, using GGA (HSE03) approximation potential. FrNBr 3 (N Ca, Sr) perovskites show increased band gap values using the HSE03 method. Notably, these HSE03-derived values align with the trends observed in the GGA-PBE scheme, under both normal and hydrostatic pressure conditions. As pressure increases, both the lattice constant and unit cell volume decrease significantly. The estimated direct band gaps demonstrate the semiconducting nature of the compounds under ambient pressure. However, when pressure increases, the band gap narrows, increasing conductivity, and makes it as one of the great contenders of microelectronics as well as tandem photovoltaics due to its shift from ultraviolet to visible light energy region. Applying pressure enhances the optical properties, showcasing its utility in various semiconductor applications within the visible ranges and overcoming its limited usage in the ultraviolet domain. In the same vein, the application of hydrostatic pressure significantly impacts mechanical properties without compromising stability. The ductile and anisotropy character become more pronounced when pressure is exerted.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal Expansion and Ionic Conductivity · Perovskite Materials and Applications · Rare-earth and actinide compounds

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Halide perovskite photovoltaics: background, status, and future prospects10.1021/acs.chemrev.8b00539 ↗
2. What defines a halide perovskite?10.1021/acsenergylett.0c00039 ↗
3. Properties and potential optoelectronic applications of lead halide perovskite nanocrystals10.1126/science.aam7093 ↗
4. Simple ways of determining perovskite structures10.1107/S0567739475001635 ↗
5. Organic-inorganic electronics10.1147/rd.451.0029 ↗
6. Templating and structural engineering in organic–inorganic perovskites10.1039/b007070j ↗
7. Thin-film deposition of organic−inorganic hybrid materials10.1021/cm0101677 ↗
9. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
10. Halide perovskite materials for solar cells: a theoretical review10.1039/C4TA05033A ↗
11. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
12. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
13. Lead halide perovskite nanocrystals in the research spotlight: stability and defect tolerance10.1021/acsenergylett.7b00547 ↗
14. Fighting health hazards in lead halide perovskite optoelectronic devices with transparent phosphate salts10.1021/acsami.0c21137 ↗
15. Potential lead toxicity and leakage issues on lead halide perovskite photovoltaics10.1016/j.jhazmat.2021.127848 ↗
16. Environment versus sustainable energy: the case of lead halide perovskite-based solar cells10.1557/mre.2017.17 ↗
17. Lead-free organic–inorganic tin halide perovskites for photovoltaic applications10.1039/C4EE01076K ↗
18. Design of lead-free inorganic halide perovskites for solar cells via cation-transmutation10.1021/jacs.6b09645 ↗
19. Bandgap engineering of lead‐halide perovskite‐type ferroelectrics10.1002/adma.201505224 ↗
20. Valence and conduction band tuning in halide perovskites for solar cell applications10.1039/C6TA04949D ↗
21. Modifying the surface structure of perovskite-based catalysts by nanoparticle exsolution10.3390/catal10030268 ↗
22. Cation size mismatch and charge interactions drive dopant segregation at the surfaces of manganite perovskites10.1021/ja3125349 ↗
23. Sr segregation in perovskite oxides: why it happens and how it exists10.1016/j.joule.2018.07.016 ↗
24. High chloride doping levels stabilize the perovskite phase of cesium lead iodide10.1021/acs.nanolett.6b00635 ↗
25. First-principles calculation of the optoelectronic properties of doped methylammonium lead halide perovskites: a DFT-based study10.1016/j.commatsci.2018.04.048 ↗
26. Understanding and controlling the work function of perovskite oxides using density functional theory10.1002/adfm.201600243 ↗
27. N-type doping and energy states tuning in CH3NH3Pb1–x Sb2 x/3I3 perovskite solar cells10.1021/acsenergylett.6b00241 ↗
28. Electronic structure, optical and transport properties of double perovskite La2NbMnO6: a theoretical understanding from DFT calculations10.1007/s11664-018-6207-8 ↗
29. Effect of the external electric field on the electronic structure, spectroscopic features, NLO properties, and interionic interactions in ionic liquids: a DFT approach10.1016/j.molliq.2018.10.043 ↗
30. Two-dimensional Janus Semiconductors BiTeCl and BiTeBr monolayers: a first-principles study of the tunable electronic properties via electric field and mechanical strain10.1039/D1CP01368H ↗
31. Electric field activated hydrogen dissociative adsorption to nitrogen-doped graphene10.1021/jp103835k ↗
32. Electric field effects on the adsorption of CO on a graphene nanodot and the healing mechanism of a vacancy in a graphene nanodot10.1021/jp210719r ↗
33. Effect of electric field on two-dimensional honeycomb structures from group (III–V)10.1016/j.jpcs.2021.110507 ↗
34. The pressure-induced mechanical and optoelectronic behavior of cubic perovskite PbSnO3 via ab-initio investigations10.1016/j.ceramint.2018.04.217 ↗
35. Physical characteristics of CdZrO3 perovskite at different pressure for optoelectronic application10.1016/j.jmrt.2020.06.086 ↗
36. High-pressure structural change in the ferroelectric layered perovskite S r 2 N b 2 O 710.1103/PhysRevB.100.054110 ↗
37. Putting DFT to the trial: first principles pressure dependent analysis on optical properties of cubic perovskite SrZrO310.1016/j.cocom.2015.07.002 ↗
38. Electronic, optical and elastic properties of cubic perovskite CsPbI3: using first principles study10.1016/j.ijleo.2016.09.013 ↗
39. Hydrostatic pressure on XLiH3 (X= Ba, Sr, Ca) perovskite hydrides: an insight into structural, thermo-elastic and ultrasonic properties through first-principles investigation10.1016/j.ssc.2021.114222 ↗
40. Indirect to direct bandgap transition in methylammonium lead halide perovskite10.1039/C6EE03474H ↗
41. Properties of RbHgF3 fluoro-perovskite under growing hydrostatic pressure from first-principles calculations10.1063/5.0068050 ↗
42. High pressure and elastic properties of a guanidinium-formate hybrid perovskite10.1039/C9DT04805G ↗
43. Electronic phase transition from semiconducting to metallic in cubic halide CsYbCl3 perovskite under hydrostatic pressure10.1016/j.physb.2021.413650 ↗
44. Stability and band-gap tuning of the chalcogenide perovskite BaZrS3 in Raman and optical investigations at high pressures10.1103/PhysRevApplied.8.044014 ↗
45. Semiconductor to metallic transition under induced pressure in Cs2AgBiBr6 double halide perovskite: a theoretical DFT study for photovoltaic and optoelectronic applications10.1039/D1RA03161A ↗
46. Hydrostatic pressure-tuning of thermoelectric properties of CsSnI3 perovskite by first-principles calculations10.1016/j.commatsci.2021.110917 ↗
47. Insight into the topological phase and elastic properties of halide perovskites CsSnX3 (X= l, Br, Cl) under hydrostatic pressures10.1063/1.5125920 ↗
48. Rules and mechanisms governing octahedral tilts in perovskites under pressure10.1103/PhysRevB.96.054102 ↗
49. Pressure-induced topological nontrivial phase and tunable optical properties in all-inorganic halide perovskites10.1021/acs.jpcc.8b06712 ↗
50. Cooperative B-site octahedral tilting, distortion and A-site conformational change induced phase transitions of a 2D lead halide perovskite10.1039/D1QM00566A ↗
51. Semiconductor behavior of halide perovskites AGeX3 (A= K, Rb and Cs; X= F, Cl and Br): first-principles calculations10.1007/s12648-019-01480-0 ↗
52. Structural, electronic and optical modeling of perovskite solar materials ASnX3 (A= Rb, K; X= Cl, Br): first principle investigations10.1016/j.matchemphys.2021.124284 ↗
53. First principles methods using CASTEP
54. Elastic constants of graphene: comparison of empirical potentials and DFT calculations10.1016/j.physe.2018.11.025 ↗
55. Structural prediction and overall performances of CrSi2 disilicides: DFT investigations
56. Characterization of elastic modulus across the (Al1–xScx) n system using dft and substrate-effect-corrected nanoindentation10.1109/TUFFC.2018.2862240 ↗
57. Elastic anisotropies and thermal properties of cubic TMIr (TM= Sc, Y, Lu, Ti, Zr and Hf): a DFT calculation10.1088/2053-1591/ab1f01 ↗
58. Designing of the indacenodithiophene core-based small molecules for optoelectronic applications: a DFT approach10.1016/j.solener.2022.03.072 ↗
59. A DFT study of perovskite type halides KBeBr3, RbBeBr3, and CsBeBr3 in triclinic phase for advanced optoelectronic devices10.1016/j.ssc.2022.114674 ↗
60. Revealing optoelectronic and transport properties of potential perovskites Cs2PdX6 (X= Cl, Br): a probe from density functional theory (DFT)10.1016/j.solener.2018.01.059 ↗
61. Ab initio DFT determination of structural, mechanical, optoelectronic, thermoelectric and thermodynamic properties of RbGeI3 inorganic perovskite for different exchange-correlation functionals
62. Density functional theory (DFT)10.1103/PhysRev.136.B864 ↗
63. Understanding density functional theory (DFT) and completing it in practice10.1063/1.4903408 ↗
64. Density functional analysis: the theory of density-corrected DFT10.1021/acs.jctc.9b00826 ↗
65. First-principles simulation: ideas, illustrations and the CASTEP code10.1088/0953-8984/14/11/301 ↗
66. Soft self-consistent pseudopotentials in a generalized eigenvalue formalism10.1103/PhysRevB.41.7892 ↗
67. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
68. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
69. General methods for geometry and wave function optimization10.1021/j100203a036 ↗
70. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
71. ELATE: an open-source online application for analysis and visualization of elastic tensors10.1088/0953-8984/28/27/275201 ↗
72. New tolerance factor to predict the stability of perovskite oxides and halides10.1126/sciadv.aav0693 ↗
73. Optical absorption of divalent metal tungstates: correlation between the band-gap energy and the cation ionic radius10.1209/0295-5075/83/37002 ↗
74. Structural, elastic and optoelectronic properties of inorganic cubic FrBX3 (B= Ge, Sn; X= Cl, Br, I) perovskite: the density functional theory approach10.1039/D2RA00546H ↗
75. Effect of external pressure on the structural stability, electronic structure, band gap engineering and optical properties of LiNbO3: an ab-initio calculation
76. Physical properties of rare earth perovskites CeMO3 (M= Co, Cu) in the context of density functional theory
77. Optical properties of photovoltaic organic–inorganic lead halide perovskites10.1021/acs.jpclett.5b01865 ↗
78. Linear optical properties of solids within the full-potential linearized augmented planewave method10.1016/j.cpc.2006.03.005 ↗
79. Photoelectron energy spectra and the band structures of the noble metals10.1103/PhysRevB.3.1862 ↗
80. Physical properties of the recently discovered Zr2(Al1− x Bix)C MAX phases10.1007/s10854-016-5338-z ↗
81. Activation of photocatalytic water oxidation on N-doped ZnO bundle-like nanoparticles under visible light10.1021/jp311729b ↗
82. Photoconductivity and optical conductivity in lightly doped Nd2CuO4− δ10.1016/0921-4534(92)90051-D ↗
83. Temperature dependent photoreflectance study of Cu2SnS3 thin films produced by pulsed laser deposition10.1063/1.4990657 ↗
84. Anisotropic optical properties of GeS investigated by optical absorption and photoreflectance10.1039/D0MA00146E ↗
85. Towards lead-free perovskite photovoltaics and optoelectronics by ab-initio simulations10.1038/s41598-017-13172-y ↗
86. Dependence of elastic stiffness on electronic band structure of nanolaminate M2AlC (M= Ti, V, Nb, and Cr) ceramics10.1103/PhysRevB.69.214111 ↗
87. Finite deformations of an elastic solid10.2307/2371405 ↗
88. On the stability of crystal lattices. I10.1017/S0305004100017138 ↗
89. Effects of pressure on narrowing the band gap, visible light absorption, and semi-metallic transition of lead-free perovskite CsSnBr3 for optoelectronic applications10.1016/j.jpcs.2021.110083 ↗
90. Semiconducting to metallic transition with outstanding optoelectronic properties of CsSnCl3 perovskite under pressure10.1038/s41598-020-71223-3 ↗
91. Enhanced ductility and optoelectronic properties of environment-friendly CsGeCl3 under pressure10.1063/5.0048849 ↗
92. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
93. Frantsevich · 1983
94. Pressure induced semiconductor to metal phase transition in cubic CsSnBr3 perovskite10.1063/5.0048979 ↗
95. Poisson's ratio and modern materials10.1038/nmat3134 ↗
96. Ab initio calculations of elastic constants and thermodynamic properties of NiAl under high pressures10.1016/j.commatsci.2008.05.026 ↗
97. A general elastic-anisotropy measure10.1063/1.2338835 ↗
98. Universal elastic anisotropy index10.1103/PhysRevLett.101.055504 ↗
99. Elasticity and anelasticity of metals10.1021/j150474a017 ↗
100. Elastic constants of polycrystals with generally anisotropic crystals10.1063/1.4965867 ↗