Na2S decorated NiOx as effective hole transport layer for inverted planar perovskite solar cells
Source abstract
Abstract
NiO x have been considered as an excellent material for hole transport layer (HTL) of perovskite solar cells because of its wide band gap, excellent optical transmittance, proper chemical stability and energy level matching with perovskite materials. However, the power conversion efficiency ( PCE) of inverted perovskite solar cells (PSCs) is hindered by the low conductivity of unmodified NiO x. Here, we reported an operative Na 2S treated NiO x HTL, which could optimize the conductivity of the NiO x layers and the crystallinity of perovskite. The synergistic effect of Na cations and S anions could strengthen the conductivity of the NiO x HTL, improve the interface contact between NiO x and perovskite, and enhance the quality of the perovskite film, so as to boost photoelectricity performance of the device. The carrier dynamics have shown that doping of Na 2S could not only diminish the interface defects of the HTL/perovskite layer, but also improve the hole extraction at the NiO x/perovskite interface. All these factors led to the improvements in short-circuit density ( J sc), fill factor ( FF) and PCE of inverted planar perovskite solar cells. Consequently, Na2S-decorated NiOx HTL contributes to a stable device which attains a champion efficiency of 16.9%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Inorganic perovskite solar cells: a rapidly growing field10.1002/solr.201700188 ↗
2. Interface and defect engineering for metal halide perovskite optoelectronic devices10.1002/adma.201803515 ↗
3. Interface defects passivation and conductivity improvement in planar perovskite solar cells using Na2S-doped compact TiO2 electron transport layers10.1021/acsami.0c03180 ↗
4. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
5. General working principles of CH3NH3PbX3 perovskite solar cells10.1021/nl404252e ↗
6. A solvent and vacuum-free route to large-area perovskite films for efficient solar modules10.1038/nature23877 ↗
7. A p‐p+ homojunction‐enhanced hole transfer in inverted planar perovskite solar cells10.1002/cssc.202100083 ↗
8. Nickel oxide electrode interlayer in CH3NH3PbI3 perovskite/PCBM planar-heterojunction hybrid solar cells10.1002/adma.201306217 ↗
9. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
10. Solvent engineering for high-performance PbS quantum dots solar cells10.3390/nano7080201 ↗
11. Promises and challenges of perovskite solar cells10.1126/science.aam6323 ↗
12. High-performance humidity sensor based on CsPdBr3 nanocrystals for noncontact sensing of hydromechanical characteristics of unsaturated soil10.1002/pssr.202200017 ↗
13. Room temperature hydrogen sulfide sensor based on tributyltin oxide-functionalized perovskite CsPbBr3 quantum dots10.1021/acsanm.2c00791 ↗
14. Low-temperature processed meso-superstructured to thin-film perovskite solar cells10.1039/c3ee40810h ↗
15. Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells
16. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells10.1002/adma.201301327 ↗
17. Performance enhancement of perovskite solar cells by doping TiO2 blocking layer with group VB elements10.1016/j.jallcom.2016.10.106 ↗
18. Inverted perovskite solar cells: progresses and perspectives10.1002/aenm.201600457 ↗
19. Enhanced efficiency and stability of inverted perovskite solar cells using highly crystalline SnO2 nanocrystals as the robust electron-transporting layer10.1002/adma.201600619 ↗
20. Interface engineering for highly efficient and stable planar p-i-n perovskite solar cells10.1002/aenm.201701883 ↗
21. Effect of different surface treatments of sputtered NiOX on the photovoltaic parameters of perovskite solar cells: a correlation study10.35848/1882-0786/ab6bde ↗
22. Hole‐transport materials for perovskite solar cells10.1002/anie.201601757 ↗
23. Interfacial degradation of planar lead halide perovskite solar cells10.1021/acsnano.5b03687 ↗
24. Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 2010.1126/science.aam5655 ↗
25. V2O5-PEDOT: PSS bilayer as hole transport layer for highly efficient and stable perovskite solar cells10.1016/j.orgel.2017.10.034 ↗
26. Efficient inverted-type perovskite solar cells using UV-ozone treated MoOx and WOx as hole transporting layers10.1016/j.solener.2016.10.005 ↗
27. Interface modification of sputtered NiOx as the hole-transporting layer for efficient inverted planar perovskite solar cells10.1039/C9TC05759E ↗
28. Passivation of bulk and interface defects in sputtered-NiOx-based planar perovskite solar cells: a facile interfacial engineering strategy with alkali metal halide salts10.1021/acsaem.1c00032 ↗
29. Enhanced photovoltage for inverted planar heterojunction perovskite solar cells10.1126/science.aap9282 ↗
30. Breakthroughs in NiOx-HTMs towards stable, low-cost and efficient perovskite solar cells10.1016/j.nanoen.2018.06.082 ↗
31. Residual PbI2 beneficial in the bulk or at the interface? An investigation study in sputtered NiOx hole-transport-layer-based perovskite solar cells10.1021/acsaem.0c00245 ↗
32. Investigating the growth of CH3NH3PbI3 thin films on RF‐sputtered NiOx for inverted planar perovskite solar cells: effect of CH3NH3+ halide additives versus CH3NH3+ halide vapor annealing10.1002/admi.201901748 ↗
33. First-principles study of ion diffusion in perovskite solar cell sensitizers10.1021/jacs.5b03615 ↗
34. Perovskite solar cells: understanding the doping effect on NiO: toward high-performance inverted perovskite solar cells (adv. Energy mater. 19/2018)
35. Cesium doped NiOx as an efficient hole extraction layer for inverted planar perovskite solar cells10.1002/aenm.201700722 ↗
36. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers10.1126/science.aad1015 ↗
37. Field‐effect control in hole transport layer composed of Li:NiO/NiO for highly efficient inverted planar perovskite solar cells
38. Charge transfer modification of inverted planar perovskite solar cells by NiOx/Sr:NiOx bilayer hole transport layer
39. Simple and efficient perovskite solar cells with multi‐functional mixed interfacial layers10.1002/admi.202002007 ↗
40. Molecule-doped nickel oxide: verified charge transfer and planar inverted mixed cation perovskite solar cell
41. Surface sulfuration of NiO boosts the performance of inverted perovskite solar cells10.1002/solr.202000270 ↗
42. From bulk to surface: sodium treatment reduces recombination at the nickel oxide/perovskite interface10.1002/admi.201900789 ↗
43. Amorphous tin oxide as a low-temperature-processed electron-transport layer for organic and hybrid perovskite solar cells10.1021/acsami.6b13675 ↗
44. Highly efficient semitransparent CsPbIBr2 perovskite solar cells via low-temperature processed In2S3 as electron-transport-layer10.1016/j.nanoen.2018.12.097 ↗
45. High-quality NiO thin film by low-temperature spray combustion method for perovskite solar cells10.1016/j.jallcom.2019.151970 ↗
46. Effect of annealing temperature on the characteristics of the modified spray deposited Li-doped NiO films and their applications in transparent heterojunction diode10.1016/j.solmat.2014.09.017 ↗
47. Effect of oxygen on characteristics of nickel oxide∕indium tin oxide heterojunction diodes10.1063/1.2404466 ↗
48. Effect of heat treatment on the properties of non-stoichiometric p-type nickel oxide films deposited by reactive sputtering10.1016/j.tsf.2005.04.061 ↗
49. Low-temperature sputtered nickel oxide compact thin film as effective electron blocking layer for mesoscopic NiO/CH3NH3PbI3 perovskite heterojunction solar cells10.1021/am503610u ↗
50. Understanding the doping effect on NiO: toward high-performance inverted perovskite solar cells
51. Understanding interface engineering for high-performance fullerene/perovskite planar heterojunction solar cells
52. Stable high‐performance perovskite solar cells via grain boundary passivation10.1002/adma.201706576 ↗
53. Side-chain engineering of donor–acceptor conjugated small molecules as dopant-free hole-transport materials for efficient normal planar perovskite solar cells10.1021/acsami.9b17386 ↗
54. Surface modification of perovskite film by an amino acid derivative for perovskite solar cell10.1016/j.orgel.2022.106598 ↗
55. Inverted perovskite solar cells employing doped NiO hole transport layers: a review10.1016/j.nanoen.2019.103860 ↗