journal article·2021-11

Thickness induced modifications in the valence, conduction bands and optoelectronic properties of undoped and Nb-doped anatase TiO2 thin films

Krishna Manwani, Emila Panda

Publisher page

Abstract

Abstract Nb-doped anatase TiO2 (NTO) is a promising wide band gap transparent semiconductor as it is an inexpensive, environment-friendly and chemically stable compound. However, its overall electronic structure and optoelectronic properties are tailored by tuning the microstructure, which are effected by varying process conditions. To this end, here series of thickening NTO and undoped anatase TiO2 (TO) films are deposited on quartz substrate in RF magnetron sputtering, followed by vacuum annealing at 823 K. Following fabrication, detailed electronic structure, defect states, microstructure and optoelectronic characterization of all these films are performed. Here, energy positions of the valence and conduction band edges are correlated with the oxygen and titanium content of these films. Whereas, TO films are found to be highly insulating, NTO films show highly conducting characteristics. The lowest electrical resistivity of 4.80 × 10−3 Ω cm is obtained for ~74 nm thick NTO film. Additionally, relative positions and intensities of the shallow donor level defect states of anatase are analyzed and compared with ZnO to gain fundamental insight into the differences in their electrical behavior. Along with visible region, these films also exhibit high transmittance in NIR range, thereby making these promising transparent conductors in the entire spectral range.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (84)

Show source-provided references
1. Transparent conductors
2. Transparent conducting oxides for photovoltaics
3. Past achievements and future challenges in the development of optically transparent electrodes10.1038/nphoton.2012.282 ↗
4. Basic materials physics of transparent conducting oxides10.1039/b408864f ↗
5. Transparent conducting oxides for electrode applications in light emitting and absorbing devices10.1016/j.spmi.2010.08.011 ↗
6. Transparent conducting oxide semiconductors for transparent electrodes10.1088/0268-1242/20/4/004 ↗
7. Transparent conductive Nb-doped TiO2 films deposited by RF magnetron co-sputtering10.1016/j.apsusc.2015.09.080 ↗
8. Sputter deposition and computational study of M-TiO2 (M=Nb, Ta) transparent conducting oxide films10.1016/j.surfcoat.2011.04.007 ↗
9. Structural and electrical properties of Nb-doped TiO2 films sputtered with plasma emission control10.1016/j.tsf.2014.08.011 ↗
10. TiO2-based transparent conducting oxides; the search for optimum electrical conductivity using a combinatorial approach10.1039/c3tc31472c ↗
11. Properties of TiO2 thin films deposited by rf reactive magnetron sputtering on biased substrates10.1016/j.apsusc.2016.08.125 ↗
12. Oxygen partial pressure and thermal annealing dependent properties of RF magnetron sputtered TiO2-x films10.1016/j.mssp.2014.12.080 ↗
13. Sputtered Nb- and Ta-doped TiO2 transparent conducting oxide films on glass10.1557/JMR.2007.0353 ↗
14. A transparent metal: Nb-doped anatase TiO210.1063/1.1949728 ↗
15. Fabrication of highly conductive Ti1-x NbxO2 polycrystalline films on glass substrates via crystallization of amorphous phase grown by pulsed laser deposition10.1063/1.2742310 ↗
16. Fabrication of low resistivity Nb-doped TiO2 transparent conductive polycrystalline films on glass by reactive sputtering10.1143/JJAP.46.5275 ↗
17. Properties of TiO2-based transparent conducting oxide thin films on GaN(0001) surfaces10.1063/1.3326943 ↗
18. Fabrication of TiO2-based transparent conducting oxide on glass and polyimide substrates10.1016/j.tsf.2008.11.090 ↗
19. Electronic band structure of transparent conductor: Nb-doped anatase TiO210.1143/APEX.1.111203 ↗
20. Low-temperature fabrication of transparent conducting anatase Nb-doped TiO2 films by sputtering10.1143/APEX.1.115001 ↗
21. Properties of TiO2-based transparent conducting oxides
22. Semiconducting behavior of niobium-doped titanium oxide in the amorphous state10.1063/1.3698389 ↗
23. Combinatorial atmospheric pressure chemical vapour deposition (cAPCVD) of niobium doped anatase; Effect of niobium on the conductivity and photocatalytic activity10.1039/c0jm01244k ↗
24. Optical properties of Nb-doped TiO2 thin films prepared by sol-gel method10.1016/j.ceramint.2012.11.066 ↗
25. Effect of RF power and sputtering pressure on the structural and optical properties of TiO2 thin films prepared by RF magnetron sputtering10.1016/j.apsusc.2011.07.125 ↗
26. Effects of annealing temperature and method on structural and optical properties of TiO2 films prepared by RF magnetron sputtering at room temperature10.1016/j.apsusc.2006.08.019 ↗
27. Thickness effect of Nb-doped TiO2 transparent conductive oxide grown on glass substrates fabricated by RF sputtering10.1007/s11664-016-5180-3 ↗
28. Nb-doped TiO2 thin films for photovoltaic applications10.1016/j.matdes.2015.07.034 ↗
29. The synthesis of Nb-doped TiO2 nanoparticles for improved-performance dye sensitized solar cells10.1016/j.electacta.2015.09.072 ↗
30. Formation of oxygen vacancies and Ti3+ state in TiO2 thin film and enhanced optical properties by air plasma treatment10.1038/srep32355 ↗
31. Synthesis and characterization of niobium-doped TiO2 nanotube Arrays by anodization of Ti-20Nb alloys10.1016/S1005-0302(12)60144-3 ↗
32. Tantalum nitride films integrated with transparent conductive oxide substrates: via atomic layer deposition for photoelectrochemical water splitting10.1039/C6SC02116F ↗
33. Room temperature growth of zinc oxide films on Si substrates by the RF magnetron sputtering10.1016/j.matlet.2003.07.040 ↗
34. Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles10.1186/2251-7235-6-6 ↗
35. Strain induced phase formation, microstructural evolution and bandgap narrowing in strained TiO2 nanocrystals grown by ball milling10.1016/j.jallcom.2016.03.154 ↗
36. Young's modulus surface and Poisson's ratio curve for tetragonal crystals10.1088/1674-1056/17/5/006 ↗
37. Variation of electrical properties in thickening Al-doped ZnO films: role of defect chemistry10.1039/C6RA06513A ↗
38. On the photoluminescence of semiconducting titanates applied in photoelectrochemical cells10.1016/0022-4596(85)90296-8 ↗
39. Synthesis of nanophase TiO2 by ion beam sputtering and cold condensation technique10.1142/S0217979298001538 ↗
40. Is the band gap of pristine TiO2 narrowed by anion- and cation-doping of titanium dioxide in second-generation photocatalysts?10.1021/jp065659r ↗
41. Preparation and photoluminescence of highly ordered TiO2 nanowire arrays10.1063/1.1350959 ↗
42. Fabrication, characterization, and photoluminescence properties of highly ordered TiO2 nanowire arrays10.1557/JMR.2001.0157 ↗
43. Room temperature photoluminescence of anatase and rutile TiO2 powders10.1016/j.jlumin.2013.09.068 ↗
44. Evidence of oxygen vacancy induced room temperature ferromagnetism in solvothermally synthesized undoped TiO2 nanoribbons10.1039/c3nr00799e ↗
45. Evidence for Ti interstitial induced extended visible absorption and near infrared photoluminescence from undoped TiO2 nanoribbons: an in situ photoluminescence study10.1021/jp408249q ↗
46. Self-doped Ti3+ enhanced photocatalyst for hydrogen production under visible light10.1021/ja103843d ↗
47. Photoluminescence characteristics of TiO2 and their relationship to the photoassisted reaction of water/methanol mixture10.1021/jp065744z ↗
48. Blue light emitting nanosized TiO2 colloids10.1021/ja970587q ↗
49. Photoelectronic processes in rutile10.1103/PhysRev.184.979 ↗
50. The effect of annealing in different atmospheres on the lumienscence of polycrystalline TiO210.1088/0953-8984/16/2/031 ↗
51. A hybrid density functional study on the electron and hole trap states in anatase titanium dioxide10.1039/C1CP21547G ↗
52. Function of TiO2 lattice defects toward photocatalytic processes: view of electronic driven force10.1155/2013/364802 ↗
53. Multi-phase semicrystalline microstructures drive exciton dissociation in neat plastic semiconductors10.1039/C5TC02043C ↗
54. Optical properties of sputter deposited transparent and conducting TiO2:Nb films10.1016/j.tsf.2009.06.064 ↗
55. Sputtering yields of metals for ar+ and ne+ ions with energies from 50 to 600 ev10.1063/1.1736012 ↗
56. Formation and evolution of the high-surface-energy facets of anatase TiO210.1021/acs.jpcc.5b00087 ↗
57. Influence of film thickness and annealing atmosphere on the structural, optical and luminescence properties of nanocrystalline TiO2 thin films prepared by RF magnetron sputtering10.1007/s10854-013-1117-2 ↗
58. Transparent conductive Nb-doped TiO2 films deposited by direct-current magnetron sputtering using a TiO2 - x target10.1016/j.tsf.2007.10.047 ↗
59. Annealing effected Nb dopant activation and optoelectronic properties in anatase thin films10.1007/s10854-020-05076-x ↗
60. Luo · 2007
61. Effect of annealing on the Nb-doped TiO2 films prepared by DC/RF cosputtering10.1149/1.2952816 ↗
62. Niobium diffusion in niobium-doped titanium dioxide10.1007/s10008-008-0717-x ↗
63. Electrical conductivity and charge compensation in Nb doped TiO2 rutile10.1063/1.434952 ↗
64. Gardecka · 2016
65. Effect of heat treatment on microstructural and optical properties of CBD grown Al-doped ZnO thin films10.1016/j.mseb.2010.10.017 ↗
66. The influence of thermal annealing on the structural, optical and electrical properties of AZO thin films deposited by magnetron sputtering10.1016/j.surfcoat.2017.04.072 ↗
67. Effects of post-deposition annealing temperature and time on physical properties of metal-organic decomposed lanthanum cerium oxide thin film10.1016/j.tsf.2011.01.072 ↗
68. Zinc interstitial threshold in Al-doped ZnO film: effect on microstructure and optoelectronic properties10.1063/1.5021736 ↗
69. Tuning the photocatalytic activity of anatase TiO2 thin films by modifying the preferred < 001 > grain orientation with reactive dc magnetron sputtering10.3390/coatings4030587 ↗
70. The effect of low pressure on the structure of LPCVD polycrystalline silicon films10.1149/1.2100239 ↗
71. Mg addition in undoped and Al-doped ZnO films: fabricating near UV transparent conductor by bandgap engineering10.1016/j.jallcom.2019.02.289 ↗
72. Optical and photocatalytic properties of composite TiO2/ZnO thin films10.1016/j.cattod.2013.10.003 ↗
73. Thickness study of AZO films by RF sputtering in Ar + H2 atmosphere at room temperature
74. Morphological and electrical evolution of ZnO:Al Thin films deposited by RF magnetron sputtering onto glass substrates10.1590/1516-1439.281214 ↗
75. Investigation of the optoelectronic properties of Ti-doped indium tin oxide thin film10.3390/ma8095316 ↗
76. Influencing FTO thin film growth with thin seeding layers: a route to microstructural modification10.1039/C5TC02144H ↗
77. Room temperature deposition of homogeneous, highly transparent and conductive Al-doped ZnO films by reactive high power impulse magnetron sputtering10.1016/j.solmat.2016.07.020 ↗
78. Influence of the nanoscale structural features on the properties and electronic structure of Al-doped ZnO thin films: an X-ray absorption study10.1016/j.solmat.2011.04.003 ↗
79. Band-gap widening in heavily Sn-doped In2O310.1103/PhysRevB.30.3240 ↗
80. Absorption edge shift in ZnO thin films at high carrier densities10.1016/0038-1098(81)90224-6 ↗
81. Transparent conducting oxide films of heavily Nb-doped titania by reactive co-sputtering10.1016/j.jallcom.2011.08.020 ↗
82. Fluorine- and niobium-doped TiO2: chemical and spectroscopic properties of polycrystalline n-type-doped anatase10.1021/jp501203h ↗
83. Band gap engineering of early transition-metal-doped anatase TiO2: first principles calculations10.1039/C4CP03587A ↗
84. TiO2 films prepared by DC magnetron sputtering from ceramic targets10.1016/S0042-207X(02)00279-8 ↗