Preparation, characterization and photocatalytic performance of phosphorene/MoS2 as a 2D hybrid semiconductor
Source abstract
Abstract
Abstract Semiconducting two-dimensional (2D) materials such as phosphorene have shown enhanced photocatalytic performances due to their unique properties including their thickness and specific surface area. The newly 2D hybrid materials can improve the interfacial charge transfer and spatial separation of the photogenerated charge carriers and thus improve their photocatalytic performance. In this work, hybrid phosphorene/MoS2 samples were prepared by mixing the exfoliated phosphorene and MoS2 using ultrasonic bath within 1 h. The Photoluminescence (PL) measurements showed that the energy band gap of phosphorene/MoS2 hybrid was increased compared to the hybrid components. Also, the Raman peaks of the hybrid were displaced compared to that of the hybrid components. Phosphorene/MoS2 hybrid was used for decomposition of Congo red, Methylene blue and Methyl orange dyes under UV irradiation. A very low concentrations of our hybrids (0.58 mg/l) was found to have a very high photocatalytic performance which was much better than some materials that had been used as good photocatalyst previously.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 2D Materials and Applications · MXene and MAX Phase Materials · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
2. Semiconductor-based photocatalytic hydrogen generation10.1021/cr1001645 ↗
3. Computational screening of 2D materials for photocatalysis10.1021/jz502646d ↗
4. Photocatalytic activity of phosphorene derivatives: coverage, electronic, optical, and excitonic properties10.1021/acs.jpcc.7b12649 ↗
5. Anodic growth of highly ordered TiO2 nanotube arrays to 134 μm in length10.1021/jp064020k ↗
6. Fabrication of flexible and freestanding zinc chalcogenide single layers10.1038/ncomms2066 ↗
7. Enhanced catalytic activity in strained chemically exfoliated WS2 nanosheets for hydrogen evolution10.1038/nmat3700 ↗
8. All surface atomic metal chalcogenide sheets for high efficiency visible light photoelectrochemical water splitting10.1002/aenm.201300611 ↗
9. Recent development on MoS2-based photocatalysis: a review10.1016/j.jphotochemrev.2017.12.002 ↗
10. Noble metal free molybdenum disulfide cocatalyst for photocatalytic hydrogen production10.1002/cssc.201501203 ↗
11. MoS2 quantum dot decorated g-C3N4 composite photocatalyst with enhanced hydrogen evolution performance10.1039/C6RA07060D ↗
12. Combination of adsorption and biodegradation processes for textile effluent treatment using a granular activated carbon-bioflm configured packed column system
13. Black phosphorus photocatalysts for photocatalytic H2 generation: a review10.1016/j.cej.2019.123997 ↗
14. Co-P bonds as atomic-level charge transfer channel to boost photocatalytic H2 production of Co2P/black phosphorus nanosheets photocatalyst10.1021/acscatal.9b02274 ↗
15. Single layer MoS2 transistors10.1038/nnano.2010.279 ↗
16. Cu2ZnSnS4/MoS2 Reduced graphene oxide heterostructure: nanoscale interfacial contact and enhanced photocatalytic hydrogen generation10.1038/srep39411 ↗
17. The role of bandgap and interface in enhancing photocatalytic H2 generation activity of 2D-2D black phosphorus/MoS2 photocatalyst10.1016/j.apcatb.2018.09.100 ↗
18. Selected hybrid photocatalytic materials for the removal of drugs from water
19. Superb photocatalytic performance of single/few layer phosphorene prepared via sonication method10.1016/j.physe.2020.114009 ↗
20. Production of few-layer phosphorene by liquid exfoliation of black phosphorus10.1039/C4CC05752J ↗
21. Acetone improves the topographical homogeneity of liquid phase exfoliated few-layer black phosphorus flakes10.1088/1361-6528/aacc23 ↗
22. Effective size selection of MoS2 nanosheets by a novel liquid cascade centrifugation: influences of the flake's dimensions on electrochemical and photoelectrochemical applications10.1016/j.jcis.2018.05.026 ↗
23. Understanding the exfoliation and dispersion of MoS2 nanosheets in pure water10.1016/j.jcis.2017.11.013 ↗
24. 2D phosphorene as a water splitting photocatalyst: fundamentals to applications10.1039/C5EE03732H ↗
25. Thickness dependence and percolation scaling of hydrogen production rate in MoS2 nanosheet and nanosheet–carbon nanotube composite catalytic electrodes10.1021/acsnano.5b05907 ↗
26. Edge and confinement effects allow in situ measurement of size and thickness of liquid-exfoliated nanosheets10.1038/ncomms5576 ↗
27. Liquid exfoliation of solvent-stabilized few-layer black phosphorus for applications beyond electronics10.1038/ncomms9563 ↗
28. Edge phonons in black phosphorus10.1038/ncomms12191 ↗
29. Broadband optical properties of large-area monolayer CVD molybdenum disulfide10.1103/PhysRevB.90.195434 ↗
30. Two-dimensional MoS2: properties, preparation, and applications10.1016/j.jmat.2015.03.003 ↗
31. Rediscovering black phosphorus as an anisotropic layered material for optoelectronics and electronics10.1038/ncomms5458 ↗
32. MoS2 coexisting in 1T and 2H phases synthesized by common hydrothermal method for hydrogen evolution reaction10.3390/nano9060844 ↗
33. Layered MoS2 grown on c‐sapphire by pulsed laser deposition10.1002/pssr.201409561 ↗
34. Exfoliation of large-area transition metal chalcogenide single layers10.1038/srep14714 ↗
35. Broadband nonlinear optical response in multi-layer black phosphorus: an emerging infrared and mid-infrared optical material10.1364/OE.23.011183 ↗
36. Laser exfoliation of 2D black phosphorus nanosheets and their application as a field emitter10.1039/C6RA24526A ↗
37. Direct observation of Raman spectra in black phosphorus under uniaxial strain conditions10.3390/nano9040566 ↗
38. Photodegradation study of Congo Red in aqueous solution using ZnO/UV-A: effect of pH and band gap of other semiconductor groups10.4172/2157-7048.1000108 ↗
39. Adsorptive removal of methyl orange and methylene blue from aqueous solution with finger-citron-residue-based activated carbon10.1021/ie402138w ↗
40. Surface modification of TiO2 nanoparticles by magnetic ions: synthesis and application in enhancement of photocatalytic performance10.1016/j.apcatb.2017.07.060 ↗
41. Superior adsorption and regenerable dye adsorbent based on flower-like molybdenum disulfide nanostructure10.1038/srep43599 ↗
42. Hierarchically porous MoS2/CoAl-LDH/HCF with synergistic adsorption-photocatalytic performance under visible light irradiation10.1016/j.jallcom.2016.12.310 ↗
43. Efficient adsorptive removal of Congo red from aqueous solution by synthesized zeolitic imidazolate framework-810.1080/09542299.2016.1224983 ↗
44. Photocatalytic degradation of methylene blue dye using ultraviolet light emitting diodes10.1021/ie9012437 ↗
45. Photocatalytic degradation of methyl orange with commercial organic pigment sensitized TiO210.1016/j.proenv.2013.04.064 ↗
46. Black phosphorus: critical review and potential for water splitting photocatalyst10.3390/nano6110194 ↗